Compensating method for the errors is explained by an example.
实例说明了补偿这种误差的方法。
The compensating method for MEMS gyroscope random drift error is discussed.
从工程实用的角度出发，探讨了MEMS陀螺仪随机漂移误差的有效补偿方法。
Through experiment, this compensating method is effective in restraining the self-excited oscillation.
通过实验验证，此补偿方法可以有效抑制误差放大器的自激振荡。
Synthesis error modeling and error compensating method of a five-axis machining center were researched.
研究五轴数控机床的综合误差建模与补偿方法。
An error compensating method is put forward after the UWB transmit-receive 'system error being discussed.
讨论了超宽带收发系统的误差，并提出了收发系统误差的补偿方法。
The random shifting of the initiative phase noise is suppressed through the passive phase compensating method.
利用主动相位补偿法有效地消除了干涉仪系统的相位漂移。
The results of experiments indicate that the feasibility and effectiveness of this new compensating method are satisfactory.
通过在四轴数控机床上实验，证明该补偿方法的可行性。
To solve these problems, the compensating method of neutral point grounding through Peterson coil is commonly used in our country.
为了解决这一问题，我国现在普遍采用中性点经消弧线圈接地的补偿方式。
In this paper, a modeling compensating method used to compensate the linearity and temperature effect of measurement systems is proposed.
本文介绍了一种对静态线性测量系统的线性度和温度效应进行补偿的模型化方法。
It order to improving the temperature characteristic and aging drift characteristic of frequency marker, one intelligent compensating method and device is disclosed.
为了改善频标温度特性和老化漂移特性，提出一种智能补偿方法及其装置。
Based on lots of the actual process gas flow calibration experiments, and the analyses of the affection of thermal convection modulus, a new compensating method is proposed.
通过大量实流标定实验，分析了煤气导热系数对标定结果的影响，并提出了一种新的补偿方法。
This paper describes the defect of amplitude-comparison discriminator in direction-finding system in PRS, then put forward a compensating method of digital automatic gain control.
分析了比幅鉴别器在导引头测向系统中的缺点，提出了用数字式自动增益补偿的方法来加以改善。
CONCLUSION: the shield guard method for wires and the output current compensating method for current source can effectively improve the stability of current source's output current.
结论：所采取的电极导线屏蔽驱动和输出电流补偿的方法可以达到有效提高恒流源输出电流稳定度的目的。
The results of digital simulations and experiments on a typical two axis contouring system indicate that the feasibility and effectiveness of this new compensating method are satisfactory.
针对二轴轮廓系统的闭环数字仿真和实验结果，证明该方法的可行性和有效性。
A dynamic compensating method for transducers is presented based on functional link artificial neural networks (FLANN) inverse system constructed by least squares-support vector machine (LS-SVM).
提出一种用最小二乘支持向量机(LS - SVM)构造函数链接型神经网络(FLANN)逆系统的传感器动态补偿新方法。
A method that measuring angular displacement error, identifying parameters of error model and compensating error automatically was put forward based on inductosyn angular measuring system.
针对感应同步器测角系统，提出了一种自动检测测角误差、辨识误差模型系数和补偿误差的方法。
In this paper, the principle of balanced transformation is analyzed; the balance mode, detection of compensating currents and controlling method of the active filter are discussed.
文中分析了系统平衡变换原理，讨论了系统的平衡方式、补偿电流检测与有源滤波器控制方法。
By applying the harmonic analysis method to adjusting and compensating, the practical test data is acquired, and the inductosyn Angle measuring accuracy is, raised.
通过实测数据并用谐波分析的方法对两项误差进行补偿与调整，提高了感应同步器的测角精度。
This paper discusses the design method of signal conditioning circuit and Compensating technology of measuring error in using hardware and software for the pressure sensors.
介绍压力传感器的信号调节电路设计方法和测量误差的软、硬件补偿技术。
A method of current detect and control for the new active power filter (APF) is presented, which has the ability of canceling harmonic and compensating reactive power at the same time.
提出了一种新型的有源电力滤波器电流检测和控制方法，在补偿谐波电流的同时还可以进行无功补偿。
So this paper put forward the optimizing truncation method for compensating this shortage.
因此本文提出了最优截断方法来补偿这个不足。
A new method to calculate the source current reference and the compensating current reference for shunt active power filter (APF) is presented.
提出了一种计算并联型有源电力滤波器电源电流参考信号和补偿电流指令信号的新方法。
It is shown experimentally that a method available for compensating for the diffraction by centre frequency in narrow band filters can effectively improve their stopband characteristics.
本文介绍适用于窄带滤波器的中心频率衍射补偿方法。实验表明，此方法可以有效地改善滤波器的阻带特性。
Earthquake insurance, as an efficient economic method through compensating and apportioning seismic hazard, has very positive function during anti-seismic and reducing hazard program.
地震保险作为一种通过补偿和分摊地震风险的有效的经济方法之一，在防震减灾中起到了非常积极的作用。
Based on the analysis of traditional compensation methods, a method compensating the dead-time in a synchronous rotating reference frame is proposed, which fits for general-purpose inverters.
在分析了传统死区时间补偿方法的缺点之后，提出了适合于通用变频器的基于旋转坐标变换的死区时间补偿方法。
Using the decentralized control method, the intersection problem of compensating spectra and closed-loop spectra is considered.
本文使用分散控制方法，讨论并解决了控制系统的补偿谱和闭环谱的相交性问题。
The relationship between the dead-time voltage sector and the stator current sector is analyzed and a method for compensating the stator voltage sector is proposed based on the reconstructed current.
分析了死区电压矢量和定子电流矢量的关系，由此得到一种根据重构电流矢量来补偿定子电压矢量的方法。
The paper presents an efficient digital adaptive method compensating for nonlinear distortions caused by a high-power amplifier (HPA) in orthogonal frequency division multiplexing(OFDM) system.
本文提出了一种用于正交频分复用（OFDM）系统中由大功率放大器引起的非线性失真的有效的数字自适应补偿方法。
This method provides each axis with an additional compensating function according to the contour errors by adaptive fuzzy inference control, so the CNC system contour machining accuracy is modified.
该方法依据系统的轮廓误差，通过自适应模糊控制手段向各联动轴提供附加补偿作用，进而提高CNC系统的轮廓加工精度。
This method provides each axis with an additional compensating function according to the contour errors by adaptive fuzzy inference control, so the CNC system contour machining accuracy is modified.
该方法依据系统的轮廓误差，通过自适应模糊控制手段向各联动轴提供附加补偿作用，进而提高CNC系统的轮廓加工精度。
应用推荐