The relationship between the control voltage and the current output by the constant-current source may shift.
控制电压和由恒流电源输出的电流之间的关系改变可能会产生漂移。
A fairly basic circuit (left as an exercise, but it's not difficult) can take the control voltage and output a constant current which is proportional to the voltage.
一个相当基础的电路(留作练习，不过并不难)处理控制电压并输出与电压成比例的恒流。
The control system adopts current PWM control mode, and high quality energy feedback with constant power could be accomplished.
控制系统采用的是电流型PWM控制方式，能够实现高品质的恒功率能量回馈。
Unique Constant flow Constant Pressure Technology with accurate control of the voltage and current promoting stable performance.
独创恒流恒压充电技术，使电压电流得到精确控制，性能更稳定。
The result of testing on site manifests that the effect of spot welding constant current control is good.
实际焊接考核试验结果表明：控制系统具有很好的恒流控制效果。
This topic carries on the constant current control to the resistance spot welding process using a system of single chip computer, whose core has used the C8051F005.
本文的研究工作利用单片机控制系统对电阻点焊过程进行恒流控制，其核心采用了集成度英明、助能强的C8051F005单片机。
The frequency of DFB LD was driven and controlled through such technology as constant current, temperature control in active area, wavelength lock and etc.
该方案通过采用恒流源、有源区温度控制以及波长锁定等技术方法来实现DFBLD的稳频驱动及控制。
Analysis has shown that the characteristic control. which combines the advantages of both constant current control and constant speed control, is the most ideal mode.
分析表明，特性控制方式最为理想，它兼有恒流控制和恒速控制的优点。
This paper introduces a control system of spot welding constant current based on fuzzy logic arithmetic.
介绍了一种基于模糊逻辑算法的点焊恒电流控制系统。
This paper deals with the development of the microcomputer constant current control system of the spot welding inverter.
本文研制逆变点焊电源的微机恒流控制系统。
The stable and constant control system of semiconductor laser diode includes constant current control, constant power control and constant temperature control.
半导体激光器稳恒控制系统包括恒电流控制、恒功率控制和恒温度控制三个方面。
MPS700 series dc voltage constant-current power supply, is designed by using linear series MOSFET control mode of the ac input dc output power.
MPS700系列直流稳压稳流电源，是采用MOSFE T线性串联调整方式设计的交流输入直流输出电源。
This paper proposes an energy saving control mode for current source inverter(CSI) induction motor drive system with the motor driving a constant power load.
本文提出了电流型逆变器-感应电动机变频调速系统中电机驱动恒功率负载时，系统以最大效率运行的节能控制方式。
The adaptive inverse control theory has been applied in the design of a constant current source with high precision, which can be made easily as simple circuit structure.
将自适应逆控制理论应用于高精度恒流源的设计，系统结构简单，易于实现。
When the small current is detected by the constant current detecting circuit 5, a signal is supplied to the control circuit 4.
当恒流检测电路5检测到小电流时，信号被提供给控制电路4。
In this plan, the power source system was make up of by the digital control circuit part and current adding switch part and constant current source part.
此方案中的电源系统由数字控制电路、电流叠加开关和恒流源组成。
Based on the characteristic of constant-current driving, the authors discussed the control method for the high power LED, designed and actualized a project which has comprehensive function.
根据大功率LED的恒流驱动特性，讨论了大功率LED的驱动控制方法，设计并实现了一种功能较全面的驱动控制方案。
Constant current charging by switch control is the main method to generate non-sinusoid oscillation waveform.
采用开关元件控制的恒流充放电是产生稳定非正弦振荡波的主要方法。
The control system hardware is studied, including the TMS320C31-based digital signal processor board, constant current source, displacement data collected channel.
对控制系统的硬件进行了研究，包括TMS320C 31控制板，数控恒流源和位移数据采集通道。
Using the incremental fuzzy control with self-adapting parameter, the phase current of the switch reluctance motor was optimized, and the constant torque control is implemented.
采用一种基于参数自调整的增量式模糊控制器，对电机相电流进行优化，从而实现恒转矩输出。
The spot welding tests prove the microcomputer control system has satisfactory constant current monitoring effect under different main voltage and load conditions.
并通过不同网压和不同负载下的点焊试验，证明该微机系统可获得满意的恒流监控效果。
This paper introduces a high-frequency series resonant charing method of solid pulsed laser power source, basing on constant current charging of digital control technology.
介绍了一种高频串联谐振充电的固体脉冲激光电源及其数字化控制恒流充电技术。
A controlling model of inverter spot-welding process and a fuzzy neural network configuration about inverter spot-welding with constant current control were built in this paper.
推导了逆变点焊过程控制模型，并构建了逆变点焊模糊神经网络恒电流控制系统结构。
The control of the constant Phase difference between the current and the displacement of the magnetic damper in rotor-bearing system is studied.
对挠性转子轴承系统电磁阻尼器的电流位差常相位移振动控制进行研究。
Adopting constant current charging of computer measurement and control integrated system, high degree of automation, strong anti-interference ability.
采用恒流充电计算机测量控制一体化系统，自动化程度高，抗干扰能力强。
This paper presents a method about electrode movement control rule inserted in current-constant spot-weld controller.
提出了一种在恒流点焊控制器基础上加入电极热膨胀位移控制规则的方法。
This paper presents imbedding the Digital control-Constant current, it enable applied at control of electromagnetic switch, and Double modes-control was designed in it.
介绍一种针对工企业应用中电磁阀门开启度大小，而设计的具有手动与自动两种控制方式的，内嵌式数控恒流源电路。
DC constant current power supply circuit based on current closed-loop feedback control is brought (forward) in this paper and how to design the circuit is also emphatically introduced.
开发了一种基于电流闭环反馈控制的数控直流恒流源，介绍了该电路的设计思路。
DC constant current power supply circuit based on current closed-loop feedback control is brought (forward) in this paper and how to design the circuit is also emphatically introduced.
开发了一种基于电流闭环反馈控制的数控直流恒流源，介绍了该电路的设计思路。
应用推荐