This installation is applied successfully in a continuous caster line of a plant.
该振动装置已成功用于某厂小方坯连铸线。
The stopper auto casting and mould level control system of arc continuous caster is introduced.
介绍了炼钢厂连铸生产中的塞棒自动控制系统。
The increase of casting speed of continuous caster could make the time shorter for the soaking of slabs.
提高连铸机的拉坯速度可以使铸坯均热所需的时间明显缩短。
This paper gave some remarks to the design and operational parameters of billet continuous caster mould.
本文对连铸小方坯结晶器的设计和操作参数作了一些说明。
This paper analysed the producing condition of continuous caster at no. 6 Works from its test run to now.
本文分析了六厂连铸机从试生产到现在的生产情况。
The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.
讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。
Then, operation practices at continuous caster to improve inclusion removal and steel cleanliness are reviewed.
然后介绍了改善夹杂物去除和提高钢洁净度的铸机操作。
The mould is the core component of continuous caster for primary cooling and initial shell forming of liquid steel.
结晶器是连铸机的核心部件，完成将钢液初步凝固成型的任务。
The high carbon grade billet cast with continuous caster was influenced by billet inclusion, clogging of the nozzle etc.
连铸优质硬线钢小方坯时，铸坯夹渣、水口堵塞等问题影响质量和生产。
The simulation was validated by the actual operation data of No. 3 continuous caster at Baosteel. The agreement was very well.
结合宝钢3号连铸机结晶器生产数据，对模型进行了验证，所得计算结果符合实际测量值。
The advanced technology and methods for improving drawing speed and productivity of continuous caster are discused in this paper.
就提高连铸机生产率的关键技术即提高连铸机拉速和作业率所采用的先进技术和措施进行了论述。
The article describes the features and control principle of dynamic soft reduction and liquid level control of BSP continuous caster.
介绍BS P连铸机中动态轻压下和液位控制的特点和控制原理。
The calculation, control and realization method of load balance between inverters on the straightener of continuous caster are presented.
介绍了连铸拉矫机变频器装置之间负载平衡的计算、控制和实现方法。
The fluid flow in a wide slab continuous caster mold was simulated by a three-dimensional model set up using the commercial software PHOENICS.
以某钢厂宽板坯连铸结晶器为研究对象，利用商业软件PHOENI CS建立一个三维有限差分模型，模拟宽板坯连铸结晶器内钢液的流动分布。
This article makes a tentative discussion on the operating principle of 5 - roll unbending machine of the new converter continuous caster in GISE.
本文对广钢新转炉连铸机五辊拉矫机矫直原理进行了初步探讨。
This paper mainly performs the research and analysis on the cutting mechanism and pressing mechanism of the cast iron horizontal continuous caster.
本文主要对铸铁水平连铸系统的切割装置和压断装置牵引运动进行了分析及研究。
The installation, debugging and production status of twin roll strip continuous caster during the technology transferring to 4 enterprises was discussed.
叙述了向四家企业转让薄带连铸机技术过程中安装调试生产状况。
The continuous casting curve of the arc continuous caster is illustrated, the continuous casting curve equation is also provided based on the curve camber.
从曲率出发，阐述了弧形连铸机的连铸曲线，建立连铸曲线方程；
This paper introduced the experimental study on fluid dynamics of tundishes applied in the slab continuous caster of Shanghai Baoshan Iron & Steel Complex.
本文介绍了对宝钢大型板坯连铸机中间包进行的水力学模型的实验研究。
The causes of all kinds of breakout for CSP continuous caster in Liangang were analyzed. Moreover the concerned measures preventing breakout were proposed.
对涟钢CSP连铸机各种形式漏钢的原因进行了较详细的分析，并提出了预防漏钢需采取的有关措施。
The present paper studies the effect of structure of the submerged nozzle on the flow ability of the liquid steel in the mold of the slab continuous caster.
通过水力模型实验，研究了水口结构对南钢板坯连铸机结晶器内钢水流动特性的影响。
This paper introduces the operation principle of the author developed equipment for measuring roll gap and ellipticity of the guide roller in continuous caster.
文中介绍了作者研制的连铸导辊辊缝和椭圆度测量装置的工作原理及测头结构。
The reasons of continuous caster leaking are analyzed aiming to the problem of high leaking rate after reforming the small billet cast to improve its efficiency.
针对小方坯连铸高效化改造后拉漏率高的问题 ，分析了造成漏钢的原因 ，介绍了所采取的对策及取得的效果。
This article expounds the crux of the mold taper and then deduces the taper engineering formula of the mold for the horizontal continuous caster to cast round billet.
本文阐明了结晶器锥度的实质，进而导出了水平连铸圆坯用结晶锥度的设计公式。
The paper discusses in detail the structure and performance of crystallizer oscillating equipment for 1600 slab continuous caster in Benxi Steel and Iron Incorpcration.
针对本钢1600板坯连铸机结晶器振动装置的结构和性能进行了详细地分析和论述。
This paper reviews instruments used on major components of continuous caster beside mold, their effect on the design and operation of continuous caster and quality of slab.
介绍了除结晶器以外连铸机的主要部件上所采用的各种检测仪表，以及它们对连铸机操作及连铸坯质量的作用。
The paper further states the present situation of the continuous caster through introducing technology equipment and its process control of wide slab caster in Anyang steel.
本文通过介绍安钢宽板坯连铸机的技术装备及其工艺控制，进一步讲述了该连铸机的目前状况。
The high-efficiency reform of rectangular billet continuous caster of Xuanhua Iron and Steel Company is introduced, that can be used as reference for other continuous casters.
介绍了宣钢炼钢厂矩形坯连铸机的高效化改造，可供矩形坯、板坯连铸机高效化改造参考。
The calculated shell thick is basically identical with that of real billet. Thus the calculated results can be used as references for the production and design of continuous caster.
计算出的坯壳厚度与实测的坯壳厚度基本吻合，计算结果可为连铸机生产和连铸机设计提供参考。
The calculated shell thick is basically identical with that of real billet. Thus the calculated results can be used as references for the production and design of continuous caster.
计算出的坯壳厚度与实测的坯壳厚度基本吻合，计算结果可为连铸机生产和连铸机设计提供参考。
应用推荐