Centerline shrinkage is the main defect that affects the inner quality of continuous casting slab.
连铸坯内部中心缩松、缩孔是影响铸坯内部质量的主要缺陷之一。
The technical features of 100t converter and wide and heavy continuous casting slab system were introduced.
介绍柳钢100吨转炉及宽厚板坯连铸系统技术特点。
A computational heat transfer model to describe the freezing process of continuous casting slab is developed.
开发了一种描述连铸坯凝固过程的热传输数学模型。
Producing continuous casting slab without defect is precondition to hot delivery and charging continuous casting slab.
生产无缺陷的连铸坯是连铸坯热送、热装的前提条件。
The method and results of the study on formation condition for internal crack in continuous casting slab were reviewed.
评述了连铸坯内裂纹形成条件的研究方法和结果。
The method and results of the study on formation condition for internal crack in continuous casting slab were re viewed.
评述了连铸坯内裂纹形成条件的研究方法和结果。
The tundish temperature is one of the factors which seriously affect the solidification position of continuous casting slab.
中间包温度是影响连铸板坯凝固位置的重要因素之一。
There are some longitudinal surface cracks appear on the continuous casting slab and consequently on the rolling steel plate.
在连铸轧制的钢板表面有沿轧制方向的裂纹。
Quick sulfur print method used to check inner quality of continuous casting slab and its artificial analysis process in Baosteel are introduced.
介绍宝钢对连铸坯内部质量进行检查的快速硫印方法及其人工判级过程。
The calculation of strain is important in the analysis of continuous casting slab quality especially in the analysis of crack, but it is a mass work.
在分析连铸坯质量特别是裂纹时，应力应变的计算是一项很关键且工作量很大的工作。
The surface cracks might appear on continuous casting slab, whose evolution behavior during hot rolling severely affects the quality of rolled products.
连铸坯可能出现表面裂纹，其在轧制过程中的演变行为严重影响着轧制产品的质量。
This research USES rough sets to reduce this factors, then adopts radial basis function networks to predict and diagnose the continuous casting slab defect.
提出用粗糙集理论简化这些因素，然后采用径向基函数网络对连铸板坯缺陷进行预报诊断。
The transverse crack is one of the most serious defects in the continuous casting slab and it has much greater adverse influence on the quality of the CC slab.
铸坯上的横裂纹是连铸板坯上较严重的缺陷之一，对铸坯质量影响较大。
Hot delivery and hot charging technology of continuous casting slab includes two technologies: hot delivery and hot charging rolling, and direct charging rolling.
连铸坯热送热装工艺分为热送装炉轧制和直接装炉轧制两种。
Heat transfer mathematical model and BP networks prediction model during solidification of continuous casting slab are established and verified with the measured data.
建立了连铸坯凝固过程传热数学模型与BP网络预测模型，并根据实测数据对两种模型分别进行了验证。
The quality of continuous casting slab not only restricts the production of continuous caster, but also affects the productivity of the rolling mill and the quality of final products.
连铸坯的质量不仅制约着连铸机的生产，也影响着轧机的生产率和最终产品质量。
ON-line measurements of slab width during continuous casting and strip width as well as flatness during rolling are important.
连续铸造中板坯宽度和轧制过程中带钢宽度及平坦度的在线测量非常重要。
It is of great importance to rhythm and coordination of the thin slab continuous casting and rolling process.
时间因素对薄板坯连铸-连轧流程的节律性、协同性而言，其意义尤为重要。
Center segregation and center porosity will seriously affect the internal slab quality for continuous casting bloom.
连铸过程中出现的铸坯中心偏析和中心疏松会严重影响铸坯内部质量。
The main technological packages available for continuous slab casting, and some recent projects where they have been successfully applied are described.
介绍了针对板坯连铸的成套技术以及一些成功应用这些技术的项目案例。
Based on the simulation, some typical processes were investigated, and some useful Suggestions for the design of thin slab continuous casting and rolling line were proposed.
采用该软件对个别典型的工艺进行分析，为连铸连轧生产线的设计提出了有益的建议。
This program was applied to calculate the temperature distribution of copper thin-slab continuous casting with different casting speeds and cooling conditions.
利用该程序计算了不同拉速及冷却条件下，铜薄板连铸过程中温度场的分布，并分析了拉速、冷却条件对铸坯温度的影响。
In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.
在济钢ASP1700薄板坯连铸连轧项目中，连铸机结晶器调宽系统采用了新型全数字交流伺服控制系统，代表当今世界最先进控制水平。
Macroscopic fluid flow and heat and mass transfer should be taken into account for the continuous thin slab casting process.
薄板坯连铸工艺应综合考虑传热、流动与传质宏观传输现象。
It showed that EMBR could control vortex and improve the flow field in the thin slab continuous casting mould effetely.
计算表明，电磁制动对于抑制涡旋、改善薄板坯连铸结晶器中的流场有明显效果。
The system has met the requirements of slab casting, improved continuous drawing speed and reduced the cost.
该系统满足了板坯铸钢要求，提高了连检率，降低了生产成本。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
In continuous casting process, secondary cooling zone (SCZ) has significant influence on slab quality.
在连铸生产过程中，二冷段是影响铸坯质量的重要环节。
Using incompressible MHD equations and zero equation turbulent model, the paper calculated the flow field in two dimension thin slab continuous casting mould with the electromagnetic brake(EMBR).
本文采用不可压缩MHD方程及零方程湍流模式，数值计算了加电磁制动器的二维薄板坯连铸结晶器中的流场。
Using incompressible MHD equations and zero equation turbulent model, the paper calculated the flow field in two dimension thin slab continuous casting mould with the electromagnetic brake(EMBR).
本文采用不可压缩MHD方程及零方程湍流模式，数值计算了加电磁制动器的二维薄板坯连铸结晶器中的流场。
应用推荐