In the cooling section char is discharged by water-cooling;
在冷却段半焦经水冷排出。
Brick slag is removed after being cooled in the cooling section and is used for the cement production.
砖渣经冷却段冷却后排除，可用于生产水泥。
After annealing copper red: continuous annealing three sections: preheating section, the work piece, cooling section.
铜线退火后发红：连续退火分三个段：预热段，工作段、冷却段。
According to the different wire diameter, literally adjust cooling section water level, to achieve the purpose of cooling.
根据线径的不同，随便调节冷却段水位。达到冷却的目的。
Using replacement of cooling section to repair intercooler resulted in free crack and leakage, and lower maintenance cost.
采用抽换散热单节进行中冷器修复后无裂漏，并降低了检修成本。
By using a flat interface model it is possible to determine the effective length of a gas-filled heat pipe cooling section.
对充气热管空气预热器的结构进行分析和应用介绍，采用平界面模型，确定充气热管冷却段的有效长度。
Meatballs molding cooking line consisting of three parts, namely, molding and cooking, cooling section, transmission system.
肉丸成型蒸煮流水线由三大部分组成，即成型与蒸煮部分、冷却部分、传动系统部分。
The cooling velocity of fast cooling section and over aging temperature have no significant effect on bake hardening property.
快冷段冷速和过时效温度对烘烤硬化性能均无明显影响；
A coil section (60) of a linear motor (20) has a coil cooling section (57) composed of a cooling panel (53) and a heat radiation section (55).
线性马达(20)的线圈部(60)具有由冷却板(53)和散热部(55)构成的线圈冷却部(57)。
The argon arc welding process after replacement of intercooler cooling section was presented. The welding feature and weldability were analyzed.
介绍了中冷器抽换散热单节的氩弧焊接工艺，分析了中冷器抽换散热单节的焊接特点以及焊接性。
In a common continuous sheet casting apparatus, constant magnetic field of 0.3-1 tesla strength is applied to the cooling section and the crystallizing section.
由普通薄板连铸装置的冷却段及结晶器两侧外加恒定磁场，磁场强度为0.3 ~1特斯拉。
Copper wire color (dark red or white) : continuous annealing in the work period of the line burn soft and pass cooling section after cooling can achieve lead not hot, without water.
铜线变色(暗红或发白)：连续退火在工作段把线烧软，还要经过冷却段冷却后才能达到引出线不烫、不带水。
By comparison different temperature field which are affected by the lay-out of cooling section, this paper uncovers the importance of uniform cooling when design cooling section of calibrator.
并通过不同冷却流道所影响的型坯温度场的比较，揭示了整体均匀冷却在定型模冷却系统设计中的重要意义。
All standard coils are mechanically expanded copper pipes plus aluminum fins. The surface cooling section is equipped with a pitched discharge coil to ensure complete discharge of condensed water.
盘管的标准型式均为铜管串铝翅片结构，采用机械胀管。表冷段设计有倾斜式排水盘，保证彻底排尽水盘中的凝水。
This section at 6 meters below the surface houses the ventilation equipment for the cooling of the transmitters.
地下6米处的这个区域，容纳了信号传送器通风冷却设备。
Then the section saw slide rack cooling, and every 3 - 5 when the material must check the appearance quality of the saw model, at the same time appropriate to the saw blade rubbed smooth oil.
接着将锯断的型材滑入料架冷却，并且每隔3-5支料时必需锯榜样检查外表质量状况，同时恰当向锯片涂擦光滑油。
Welded sections will also have locked-in stress owing to a combination of differential heating and cooling cycles as well as to changes in cross section.
焊接面将也有锁紧力，这是因为不同的加热和冷却的循环以及结合面的变形。
This section describes the testing, care, servicing, and repair of automotive-engine cooling-system components.
本节讨论汽车发动机冷却系部件的检查、保养、维护和修理。
Ammonia corrosion of condenser copper tubes in the air removal section cannot be avoided as a result of ammonia collection and existence under super cooling condition.
由于氨的聚集与氧的存在，在凝汽器空冷区出现过冷度的情况下，铜管的氨腐蚀是不可避免的。
The computational domain were extended to the coolant supply plenum, and two rows of 26 film cooling holes were simulated, with about 200 cells across each orifice cross-section.
计算模拟了两排26个气膜孔，每个孔截面的网格数达到近200个，计算域包括了供气腔。
It is showed from that the large-length cooling and straightening process can be used according to the actual condition in medium or small section steel mill.
表明中小型钢车间精整部分根据实际情况可以实现长尺冷却、矫直工艺。
A cooling chamber for the solvent comprises a section of a second circuit.
冷却商会为溶剂组成，一节一秒钟的电路。
A cooling drive control section (11) controls drive of the cooling apparatus (3).
冷却驱动控制部(11)控制冷却装置(3)的驱动。
Compared to the channel with uniform section area, those with various section areas are much similar to the internal cooling structure of the turbine blade.
与等截面回转通道相比较，变截面通道更接近叶片内冷通道原型。
Construction technology of replacing the cooling stave (S3 section) of Baosteel 's blast furnace no. 3 is introduced.
介绍宝钢三高炉s3段冷却壁更换施工技术。
The Angle steel cross-section temperature field in cooling process simulation and experiment results are in good agreement with controlled cooling research of Angle steel.
通过对角钢控制冷却的研究，角钢冷却过程中断面温度场数值模拟结果和实验结果吻合良好。
The Angle steel cross-section temperature field in cooling process simulation and experiment results are in good agreement with controlled cooling research of Angle steel.
通过对角钢控制冷却的研究，角钢冷却过程中断面温度场数值模拟结果和实验结果吻合良好。
应用推荐