Zinc base die castings are always copper plated in cyanide baths.
锌基合金的压铸件总是在氰化镀液中镀铜。
Is plated copper tensile strength and elongation being tested? If so, what is the test frequency.
有无对镀铜板进行抗拉强度和延长进行测试？如果是这样，你的测试频率是怎样？
For example steel base plated copper, nickel, chromium plating, low layer again tin bronze chrome, multi-layer nickel chrome plating nickel ferroalloy, chrome, and so on.
例如钢基上镀铜、镍层再镀铬、低锡青铜上镀铬、多层镍上镀铬、镍铁合金镀层上镀铬等等。
The preparation process flow of conducting paint and silver plated flake copper powder as conducting filling were introduced.
介绍了导电漆、作为导电填料的片状镀银铜粉的制备工艺流程。
We suggest putting some copper in blank area on top side to improve plated quality.
建议加在顶层空白区域加些铜以提高电镀质量。
The relationship between the surface's unit resistance of the film with contents of silver plated copper powder and its particle size, and the contents of coupling agent were studied.
分别研究了漆膜表面单位电阻与镀银铜粉的含量及其粒径以及钛酸酯偶联剂的含量之间的关系。
The polarization curves of copper physical development (CuPD) system were obtained by transient constant current step method on copper plated platinum electrode.
本文采用镀铜铂电极和暂态恒电流阶跃的方法测得了铜物显（铜物理显影）体系的极化曲线。
So far, soldering iron tips have been made mainly of copper, and in order to prevent oxidization, the copper has been either iron-plated or chromlum-plated.
到目前为止，普通烙铁的焊嘴主要还是是铜，为了防止氧化，铜已经被处理加装铁皮或电镀。
Front treatment and copper plated program of copper plated aluminium wire were designed, and its mechanism was analysed.
设计了铜包铝线的前处理方案、镀铜工艺，并分析了其作用机理。
The base material provided with metallic copper surface is a sheet copper and conductive glass ITO with metallic copper plated on surface.
所述的具有金属铜表面的基底材料是指金属铜片以及表面镀了一层纳米金属铜的导电玻璃ito。
Especially in, high-end radiator electroplating, in acid, nickel plated copper plating nickel etc, black has a wealth of experience in production practice, plating industry area is the lead.
尤其在中、高端散热器电镀方面，在酸性镀铜、镀镍、黑镍等有着丰富的生产实践经验，在电镀行业领域具有领先地位。
MOVABLE CONTACT: Copper alloy, silver plated.
游动联系人：铜合金，镀银。
The properties of nickel plated steel cap were tested. And the electrical properties of nickel plated steel cap and copper cap for battery application were compared.
作者对镀镍钢帽的物理性能进行了测试，并对镀镍钢帽电池和铜帽电池的电性能作了对比试验。
We did this using a galvanized (zinc-plated) tub, a stew pot with a copper bottom, and a bottle of lemon juice.
我们使用镀锌的盆、铜底的炖锅和一瓶柠檬汁来实现。
The places to which components will be mounted are typically plated, because bare copper oxidizes quickly, and therefore is not readily solderable.
在组件将会安装通常镀铜，因为生氧化快，因此不容易电镀面很大。
BNC (male) center contact is gold plated and the BNC (Female) is gold plated Beryllium Copper for reliable electrical connection.
BNC公头中心连接体为镀金材料，并且BNC母头为镀金铍铜，具有可靠的电气连接性能。
Main products are as follows: a circuit board, gilded burnish, gold plated copper thick OSP protection (series), PCB plating copper brightener, PCB tin brightener, etc.
主要产品如下：一、线路镀金光泽剂、线路板镀厚金工艺、线路板铜保护(osp)系列、线路板镀酸铜光亮剂、线路板镀锡光亮剂等。
The life of titanium negative grid plated with copper was researched.
研究了钛上镀铜负极板栅的寿命。
The results show that the copper plated carbon fiber using optimized electroless copper plating process has even deposit, fine luster, good…
结果表明，采用优化后的碳纤维化学镀铜工艺制得的镀铜碳纤维镀覆均匀， 光泽性好， 镀层结合力强，导电性能显著提高。
The craftsman plated copper with silver.
工匠给铜镀银。
Silver-plated copper center conductor for smooth, detailed sound production.
镀银中心铜导体的顺利，详细的生产。
First, the Oscar is plated with copper to prevent corrosion.
首先，奥斯卡镀上铜以防止腐蚀。
Rugged nickel-plated copper clip leads won't spark when initially attached to a battery to reduce the possibility of an explosion.
坚固的镀镍铜夹引线时，不会引发最初连接到电池，以减少爆炸的可能性。
Amazon's thickly silver-plated FPC copper RCA plugs use a patented design that eliminates the distortion caused by the extra contact inside most plugs.
“亚马逊”镀银浓厚的FPC铜制成之R CA铜插头，是采用一项可以去除大多数插头因内部额外接触所产生失真之专利设计。
Bukota copper art work shrine with copper plated face with a black wood base use it for the happy marriage.
的金属制神像，面部镶有铜，配以深色木质底座，寓意家庭幸福婚姻美满幸福。
PV Ribbon, TUI oxygen-free copper belt high purity 99.99%, smooth, brilliant, cleaning, plated by dipping with tin and lead with different chemicals compositions.
涂锡铜带是由纯度达99.99%的TUI无氧铜材制成，产品表面光滑、平整，色泽均匀。在铜线表面涂敷了锡和铅以及其他化合物。
The main body is designed into special mechanical profiled structure of copper, The surface is nickel-plated.
主体为铜质特殊力学异型结构制造，表面镀镍。
Traditionally, any exposed copper was plated with solder by hot air solder levelling (HASL).
传统上，任何接触焊铜镀锡热空气即(HASL)。
Some experiments have been made to study the influence of the pre-plated copper on binding performance and corrosion resistance of mechanical zinc-plated layers.
研究了预镀铜对机械镀锌层的结合性能和耐腐蚀性能的影响。
The optimal formula of the UV curable conductive adhesive gained from single factor test was as follows: Silver-plated copper powder 70%, complex photoinitiator 4%, AIBN 2% and KH570 2.5%.
通过单因素实验确定了导电胶的最佳配方：镀银铜粉填充量为70%、复合光引发剂用量为4%、热引发剂aibn用量为2%、偶联剂KH570用量为2.5%。
应用推荐