The pins are placed in the copper anode, which we've formed into a basket shape.
针脚放在篮子形状的阳极里。
This paper made study on gold extraction by leaching copper anode mud with acidic thiourea solution.
本文研究了用酸性硫脲溶液从铜阳极泥中浸取金的方法。
The pretreatment technology for removal of high-content impurity elements in copper anode slime in acidic medium is studied.
对高杂质铜阳极泥在酸性介质中的预处理脱杂工艺进行了研究。
Here was made an overall introduction to a TYJ-30 disk casting set of copper anode plates and detailed its design characteristics.
本文对TY J - 3 0铜阳极板圆盘浇铸机组进行了全面介绍，并对机组的设计特点做了详细说明。
The paper relates the process flow to recover gold from copper anode slime, and points out the main factors influencing gold recovery rate.
介绍了从铜阳极泥中回收金的工艺流程，指出了影响金回收率的主要因素。
Preparation of high pure tellurium and new materials with tellurium were also described. Copper anode slime was one of the main tellurium resources.
对高纯碲的制备方法以及碲的新材料在各方面的进行了详细的介绍。
The technical modification on copper anode slime treating system in Guixi Smelter, Jiangxi Copper Ltd. , and its effectiveness achieved in production is introduces.
介绍江西铜业股份有限公司贵溪冶炼厂（以下简称贵冶）铜阳极泥处理系统改造及其效果。
The method of ICP-AES for simultaneous determination of Platinum and Palladium content in copper anode mud with lead fire assaying pre-concentration has been established.
采用铅火试金预富集，ICP - AES法同时测定铜阳极泥中微量铂和钯含量。
The effecting factors on the working period of copper anode furnace are discussed in detail, and the methods prolonging the working period of copper anode furnace are put forward.
阐述了影响铜阳极炉开动周期的诸多因素，并提出了延长阳极炉开动周期的办法。
The system designing idea, the system structure, the control method and the realizing way of copper anode Platequantitative casting and casting operation sequence control are introduced.
本文介绍了铜阳极板定量浇铸和浇铸作业顺序控制系统的设计思想、控制系统结构、控制方式及其实现方法。
By running an electrical current through the cell, using an ordinary battery charger, the copper in the anode (and in the pins) dissolves and is deposited on the lead cathode.
要想让电流通过电解池，你需要一个普通的电池充电器。阳极和针脚里的铜溶解之后会聚集在阴极上。
A mathematical model of heat loss of high temperature smoke vented from rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
根据能量平衡原理，建立了基于预热燃烧风富氧下铜精炼阳极炉高温烟气热损失数学模型，并根据富氧燃烧风对铜精炼阳极炉氧化期高温烟气热损失数学模型进行计算。
Furthermore, some reasonable advices are given and they should be beneficial to enhance more energy saving in deoxidization period of copper refining anode furnace.
此外，给出了一些合理化建议，有利于铜精炼阳极炉还原期节能效果进一步提高。
The inner anode and its choice for copper plating on stainless steel was emphatically introduced.
重点对不锈钢镀铜的内阳极及其选择作了介绍。
Activated nickle sulfide is a kind of superfine particle used in the removing copper of nickle electrolysis anode solution.
活性硫化镍是一种用于镍电解阳极液除铜的超细微粒物质。
While adopting the indissoluble anode to electrolyze, it can play a role in controlling the grain size of the electrolytic copper powder effectively, but the output is lower.
采用不溶性阳极进行电解时，能够有效地起到控制铜粉粒度的作用，但产量较低。
To address the problem, Cui and his colleagues applied a nanolayer of copper onto one side of a polymer separator, creating a novel third electrode halfway between the anode and the cathode.
为了解决这个问题，崔和他的同事将铜纳米层应用于聚合物隔板的一侧，在阳极与阴极之间形成新颖的第三电极。
Furthermore, the value of heat inertia in the hearth of copper refining rotary anode furnace in the reduction phase is so big that smoke temperature change can not quickly respond to the disturbance.
且铜精炼氧化过程炉膛具有很大的热惯性，这直接导致炉膛烟气温度动态响应速度很慢、动态过程时间很长的现象出现。
In the simplest case, the anode would be one metal, perhaps iron, the cathode another, say copper, and the electrolyte might or might not have the same composition at both electrodes.
在最简单的情形下，阳极是一种金属如铁，阴极是另一种金属如铜，在两个电极处的电解质可能有相同的组成或不相同的组成。
The application of hydrometallurgical processes which remove copper ion may recovery lots of metals in waste perforated anode and cathode plates.
采用置换除铜湿法工艺可从废旧正、负极穿孔钢带极片中回收多种金属。
A mathematical model of heavy oil flux about rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
根据能量平衡原理，建立了基于燃烧风预热下铜精炼阳极炉重油流量数学模型，并根据不同预热燃烧风温度对铜精炼阳极炉氧化期重油流量数学模型进行计算。
The inner anode includes insoluble carbon and phosphorous-copper bar.
内阳极有两种材质，分别为不溶性碳精棒和含磷铜棒。
The results showed that reducing trend of LPG flux about deoxidation period of rotary anode furnace in copper refining was quite obvious its saving energy was remarkable with the increase of temper…
此外，给出了一些合理化建议，有利于铜精炼阳极炉还原期节能效果进一步提高。
A mathematical model of heat loss of high temperature smoke vented from rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
根据能量平衡原理，建立了基于燃烧风预热下铜精炼阳极炉高温烟气热损失数学模型，并根据不同预热燃烧风温度对铜精炼阳极炉氧化期高温烟气热损失数学模型进行计算。
When protecting steel, cast iron, or copper, the anode material can be magnesium, zinc, or aluminum.
当保护钢、铸铁或铜时，可选锰、锌和铝作阳极材料。
The practice shows that developed copper electric-anode automatic product line has obtained the anticipated object, which has created huge economic benefits.
通过生产实际应用，设计生产的铜电解阳极自动生产线完全达到预期目标，为企业创造了可观的效益。
The practice shows that developed copper electric-anode automatic product line has obtained the anticipated object, which has created huge economic benefits.
通过生产实际应用，设计生产的铜电解阳极自动生产线完全达到预期目标，为企业创造了可观的效益。
应用推荐