This paper establishes the vibratory motion equation of two kinds of core-tube suspension structure, derives rigidity matrix ;
本文针对两类核筒悬挂结构建立了振动方程，推导了刚度矩阵；
That is to say, the core-tube suspension structure can fully be safe as well as applied while it has multiple seismic fortification lines through deliberate design.
因此，核筒悬挂结构完全可以通过精心设计使该类结构具有多道抗震防线，使悬挂结构既具有安全性又具有适用性。
So this paper gives mainly a nonlinear seismic response analysis method of reinforced concrete core-tube, which is key lateral-force-resisting member of the steel-concrete hybrid structures.
因此，本文着重研究这种结构的主要抗侧力部分—钢筋混凝土核心筒的非线性地震反应分析方法，旨在为进一步深入研究整个结构的抗震性能及抗震设计方法奠定基础。
JAX-WS, the core platform, USES Tube as a basic processing unit that represents SOAP-level protocol handling code such as MustUnderstand and WS-Addressing processing.
JAX - WS是核心平台，它使用Tube作为基本处理单元，表示SOAP级别的协议处理代码，如MustUnderstand,WS - Addressing处理。
Tube core concrete was formed with vertical vibrating technique.
管芯混凝土采用立式震动工艺成型；
Reformer is the key equipment in the hydrocarbon steam process while radiation reformer tube is the core of the total.
转化炉是烃类蒸汽转化工艺过程的关键设备，而转化炉的辐射段转化管更为关键的核心。
The new type DC solid state relay is a kind of new contactless switching device, with the new type IGBT and power field effect tube as the core and composed completely by solid state electron devices.
新型直流固态继电器是一种以新型器件IGBT以及功率场效应管为核心的，全部由固态电子器件组成的新型无触点开关器件。
The modeling of hybrid structures comprising external steel frames and core concrete tube is simplified for nonlinear seismic analysis.
将高层钢混凝土混合结构分为外部钢框架和内部混凝土核心筒两部分。
Bulge the tube core automatically after swelling.
胀起后自动胀紧管芯。
A core tube assembly and a method of manufacturing the assembly are also disclosed.
还公开了芯管组件本身和制造该组件的方法。
The numerical analyze results show that the core steel tube joint applied to concrete filled square steel tubular column and reinforced concrete beam have good mechanical property, and structure beh.
数值分析表明该节点用于方钢管混凝土柱与钢筋混凝土梁的节点，具有良好的性能且受力性能与在圆钢管混凝土结构中相似。
The core steel tube applied to concrete filled square steel tubular structure and verify feasibility of this joint.
将一种带有芯钢管的不连通钢管混凝土节点用于方钢管混凝土结构，验证了这种节点的可行性。
Base on the calculation of an example, suggestions on range of sideway ratio of stories up and down in transfer story of frame-core tube structure with column supporting transfer beam is obtained.
通过实例计算分析，给出了带托柱式转换梁的框架-核心筒结构的转换层上、下层间侧移角比的取值范围建议。
The steel frame and core tube are connected by composite beams to work together, and repeated axial forces would be created within the composite beams.
楼板和钢梁构成的组合梁将钢框架和核心筒连接起来迫使其协同工作，在组合梁内将产生反复轴力作用。
With the load eccentricity ratio increased, the confinement of steel tube to core concrete and the ultimate carrying capacity of the column decreased.
随着偏心率的增大，钢管对核心混凝土的套箍力作用不断削弱，构件的极限承载力也明显下降。
The technical core and performance feature of inorganic heat tube, and its application on air preheater of atmospheric furnace were recommended briefly.
简要介绍了无机热管技术的核心和性能特点以及在常压炉空气预热器上的应用情况。
As the bulged tile contact area is large and the texture is relatively uniform. in the state of high speed, the damage to the tube core is relatively small to ensure the tube core reuse.
由于胀起瓦片接触面积大且纹理比较均匀，在高速状态下对卷芯的损坏比较小，确保管芯的重复使用。
The film coil can be obtained by forming the film from the polyvinyl alcohol resin solution, and coiling the film onto the core tube.
该薄膜卷通过用聚乙烯醇树脂溶液成型薄膜、然后将该薄膜卷绕到芯管上而制得。
A core tube with a baffling mechanism is sleeved in the inner of the porous inner tube.
在多孔内管的内部套接着具有折流机构的芯管。
The internal force redistribution will emerge as the core concrete creates creep, which can make the modulus of steel tube and concrete change.
当核心混凝土产生徐变时，会出现内力重分布现象，使钢管和混凝土的模量发生变化。
The invention belongs to the technical field of processing equipment and in particular relates to a core tube processing device for an electrical penetration assembly.
本发明属于加工设备技术领域，尤其涉及一种电气贯穿件的芯管加工装置。
As a high-rise structure, Guangzhou West Tower is composed of a concrete core tube and a special exterior frame which consists of inclining concrete-filled columns.
广州珠江新城西塔是由钢管混凝土斜交网格柱形成的外筒与钢筋混凝土核心筒组成的超高层筒中筒结构体系。
The rubber tube was expansed after inflated, then closed. The soft core that could be favourable to mandrel stripping was used to rubber special tube.
用一纯橡胶管充气后使其膨胀然后将其封闭，用作橡胶异型管生产中使用的软芯，能够有利于脱芯。
In this paper, the spline finite-point method is used to analyze the tube structures, such as framed tube, core, tube in tube and bundle tubes.
本文提出的样条有限点法可用于分析各类高层筒体结构，如框筒、核心筒，筒中筒及筒束结构。
The molding technology of three-way plastic tube with flexural core is analyzed and the molding faults in plastic injecting process are forecasted.
分析了带弯芯塑料三通管的注射成型工艺，并对成型过程出现的缺陷进行预测。
The test results show that the bond strength is of concrete, but not affected by the length of the steel tube-concrete core interface.
试验结果表明，混凝土强度、钢管表面状况和混凝土养护条件对粘结强度有显著影响，而界面长度对粘结强度无影响。
The test results show that the bond strength is of concrete, but not affected by the length of the steel tube-concrete core interface.
试验结果表明，混凝土强度、钢管表面状况和混凝土养护条件对粘结强度有显著影响，而界面长度对粘结强度无影响。
应用推荐