You can use it repair a leaky toilet, or to fix a crack on a toilet seat.
可以用它修补漏水的马桶,修理马桶座圈的裂缝。
Once upon a time, there was a crab who lived in a crack on the side of a creek.
从前,一条小溪的裂缝里住着一只蟹。
For shape of CC beam blank is complex, there are more rate of longitudinal crack on the surface.
连铸异型坯由于其形状复杂,表面纵裂纹发生率较高。
This research is mainly focused on the influence of crack on the wave propagation in cracked media.
本文以裂隙对波传播的影响为主要研究目标。
This paper analyses the reasons of crack on the cold saw blade from Laigang Heavy H-Beam production line.
介绍了莱钢大型H型钢生产线冷锯锯片产生裂纹原因的研究与分析。
We were delighted when we came across a shapely specimen tucked away in a crack on the underside of a rock.
当我们遇到一个美丽的标本隐藏在岩石下面的缝隙里的时候,我们高兴极了。
Being a more serious defect, transverse crack on slab surface is very harmful to slab production and quality.
铸坯表面横向裂纹是连铸坯较严重的缺陷,其对铸坯的生产和质量危害很大。
So the strain modal broken line drawing method is presented for determning the location of the crack on a structure.
从而提出了应用应变模态折线图来估计梁结构上裂纹位置的方法。
The stability of the periodic motion decreases as the depth of the transverse crack on the rotating shaft increases.
裂纹深度的加大降低了系统周期运动的稳定性。
We also make tentative researches for fatigue fracture and for the effect of secondary crack on fatigue crack growth.
本文还在疲劳断口的研究方面进行了新的尝试,探讨了二次裂纹对疲劳裂纹扩展的影响。
The cause of the grinding crack on medium frequency induction hardened CAM shaft made of spheroidal cast iron was analyzed.
对球墨铸铁中频淬火凸轮轴磨削裂纹产生的原因进行了分析。
The cause for Angle crack on small billet in Chengde Iron and Steel Company is analyzed, the measures to prevent it worked out.
对承钢小方坯角裂产生的原因进行了剖析,并制订出相应的措施以减少裂纹。
The reasons for creating vertical joint crack on the reinforced concrete beam used in practical projects are analysed in this paper.
本文针对实际工程中钢筋混凝土梁出现贯通垂直裂缝的原因进行了分析。
The text discuss the bring reasons of crack on cement concrete pavement, and bring detail measures to avoid common fault of quality.
论述混凝土路面通常出现裂缝产生的原因,提出了避免质量通病发生的具体措施。
And I've also learned not to save things, why bother, life is short, you might never come back and there are plenty of routes; crack on!
而且我也认识到不该有所保留,为什么要费神呢,人生短暂,很有可能你不会再次回到这里,而这里的线路却又如此丰富。
By the theory of complex functions, a penny-shaped crack on axially symmetric propagating problems for composite materials was studied.
复变函数论的方法,对复合材料的圆盘状裂纹的轴对称性扩展问题进行研究。
Since the beginning of mass production of G70 in 1997 in Xi'an Rolling Stock Works, there has been report on weld crack on bolster web now and then.
西安车辆厂自从1997年开始批量生产G70一来,不时有罐体枕梁腹板立焊缝裂纹的报告。
This paper analyzes the common civil building site casting integrated in the reason of crack on the face and put forward relevant treatment measures.
本文系统地分析了普通民用住宅中现浇板面产生裂缝的原因以及提出了相关的处理措施。
My work can be summarized as follows: (1) According to the characteristics of crack on concrete structure, I realize the width measurement algorithm.
本文主要完成以下工作:1根据混凝土结构裂缝图像的特点,实现了混凝土结构裂缝宽度的测量算法。
The crack on the wall of building, which is a common disease of the building that the users complain very strongly recent years, is a common quality problem.
建筑物墙体的裂缝是近年来用户反映比较强烈的建筑通病,也是常见的质量问题。
The runners of 6 operated generating unit of Ertan Hydro Station have been checked and no crack on the primary weld of the field welding position is observed.
二滩水电站已全部投运的6台机转轮经停机检查,现场焊接的主焊缝无裂纹。
In the view of the concrete's minute construction, cement and mortar encircled bone, there is tiny crack on interface of bone and mortar under temperature load.
从混凝土组成的细观角度出发,研究水泥砂浆包围的骨料,在温度荷载作用下首先在骨料与砂浆的界面上产生界面微裂缝。
The edge crack on Q345B wide strip steel was analyzed by means of chemical composition analysis, mechanical property testing, micro metallographical examination.
采用化学成分分析、力学性能测试、显微组织观察和夹杂物检验等方法对有边缘裂纹的Q 345 B宽带钢进行分析。
For small gush of water or water leaked from crack on the surface to be shotcreted rock face grouting or tube piloted discharge should be applied before shotcreting.
受喷面的小股水或裂隙渗漏水宜采用岩面注浆或导管引排后再喷混凝土。
The reason of arc crack on retarder gear surface was analyzed by means of chemical composition analysis, hardness testing, macrostructure and microstructure examination.
通过化学成分分析、硬度试验、宏观和微观检验等方法,对减速机齿轮齿面弧形裂纹的产生原因进行了分析。
The result shows that the heating element of protect high temperature burning procedure could heat bend. No crack on the surface was found and pore was evidence spheroid.
结果表明,保护性高温烧结工艺的发热体可进行热态弯曲成形,表面没有发现裂纹,试样中的气孔已明显球化。
In this paper, the applicability of existing concrete structural component is evaluated by tests of the deflection and anti-crack on normal service limit state conditions.
针对正常使用极限状态下的挠度、抗裂等的检验来评定既有混凝土结构构件的适用性。
This article, first, mathematical models of one kind of gear fault in one— stage gearbox (the fatigue crack on root of tooth) are established on the basis of gear dynamics.
本文以齿轮动力学为基础,推导并建立了单级齿轮传动的一种齿轮失效的数学模型,即:齿根裂纹数学模型。
This article, first, mathematical models of one kind of gear fault in one— stage gearbox (the fatigue crack on root of tooth) are established on the basis of gear dynamics.
本文以齿轮动力学为基础,推导并建立了单级齿轮传动的一种齿轮失效的数学模型,即:齿根裂纹数学模型。
应用推荐