Evaporating before rolling up for batch curing and limiting processing time to 4 hours with Procion MX dyes, clear, crisper lines are maintained.
在卷起进行批量固化之前要进行蒸发，并使用普施安MX染料将处理时间限制在4小时以内，从而可以保持清晰明快的线条。
Otherwise, due to the fear of endless compensation, they may choose to discard the injured within the most effective curing time or even kill them, causing more innocent lives to be lost.
否则由于惧怕无底的赔偿，他们选择抛弃伤者，延误了最佳的治疗时间，甚至进一步杀死伤者，造成更多的无辜的生命的丧失。
By allowing the fabric to evaporate before rolling up for batch curing and limiting processing time to 4 hours with Procion MX dyes, clear, crisper lines are maintained.
通过允许织物卷起批量固化和限制处理时间为4小时，普施安MX染料之前蒸发，清晰，锐利的线条得以维持。
On November 24th Mr Gove unveiled his latest plan for curing ailing schools, this time by changing what is taught in them, and who does the teaching.
11月24日，戈夫先生公布了关于面临困难的学校的最新计划，此时要改变他们教了什么，以及由谁来教学。
The interval of the coating time is determined by the temperature at the time of construction and the degree of curing of the film (by hand).
重涂时间的间隔，由施工时的温度和涂膜固化的程度（以手触不粘）来确定。
Influencing of curing time on film hardness is discussed through modifying the ratio of paint and curing agent. The defects from spraying process and the countermeasures are narrated.
通过调整漆与固化剂比例，讨论了固化时间对漆膜硬度的影响，同时论述了喷涂过程中产生的缺陷和采取的措施。
Overview AJD-I Automatic Temperature Curing time is the struggle against traditional scald the lack of fetal development and production of premium.
概况ajd - I型自动定时温控硫化机是针对传统电烫斗补胎的不足而研制生产的。
Objective To study controlling method for curing time of the materials based on isocyanate , and perfect making means and operating rules of transmitting apparatus for the wounded.
目的：研究异氰酸酯基材料固化时间控制方法，以完善基于此材料的伤员固定转运器械的制作方法和操作规程。
The compressive strength also varied with the curing time.
养护时间不同，其抗压强度有明显的差异。
Many factors impacting on its bonding reliability and the optimum parameters of bonding were studied, such as bonding temperature, curing time, bonding pressure, conductive particles fraction.
介绍各向异性导电胶导电机理和粘接工艺，以及影响它的粘接可靠性因素和最佳参数的研究，如粘接温度、固化时间、粘接压力、粒子含量等。
The results show that nanometer microwave-absorber can obviously decrease the microwave curing time of modified epoxy adhesive under the same curing condition.
结果表明，在相同固化条件下，纳米微波吸收剂能明显降低改性环氧胶粘剂的微波固化时间。
The effects of curing time, temperature and bleeding capacity on ice-formation pressure of grout were studied.
研究了养护温度、时间及泌水率对灌浆材料结冰压的影响。
On the basis of experiments and analysing the effects of the constant temperature and curing time on the strength of fly-ash, the best curing temperature and time are obtained.
在实验的基础上通过对恒温温度及养护时间对粉煤灰强度影响的分析，得出粉煤灰制品的最佳养护温度和时间。
This work studies the effect of curing time in mold on the strength and other properties of low cement corundum castables, exploring the feasibility of reducing the curing time in mold.
研究了模内养护时间对低水泥刚玉质浇注料强度及其他性能的影响，探讨了施工过程中缩短浇注料模内养护时间的可行性。
Effect of curing temperature, curing time, resistance to media, kind and volume of the sand-laden fluid, and particle size of proppant on fibre compound sand control system were discussed.
探讨了固化温度、固化时间、耐介质性、携砂液的种类和用量以及支撑剂粒径等对纤维复合防砂体的影响。
The results showed that the increasing of curing temperature could improve the compressive strength and shorten the curing time of fly ash based mineral polymer.
结果表明：提高养护温度可以提高粉煤灰基矿物聚合物的抗压强度，缩短养护时间。
Compared with the chemically cured adhesives, it is convenient for practical use, and its curing time is short.
与化学固化粘合剂相比，其操作使用方便，固化时间短。
Effects of process conditions such as different curing temperature, curing time, starting reaction temperature and casting flaw on polyurethane elastomers mechanical properties are investigated.
研究了工艺条件(不同固化温度、固化时间和初始反应温度)以及浇注成型产生的缺陷对聚氨酯弹性体力学性能的影响。
In this study, the effects of various contents of peroxide, amine, and inhibitor on polymerization degrees, mechanical performances, and curing time of dental resins were investigated.
考察了过氧化物、胺和阻聚剂含量对实验性化学固化树脂双键转化度、显微硬度、压缩强度、径向抗张强度、弯曲强度和固化时间的影响。
The effects of PPC content, curing agent, curing temperature, curing time and adding carbon black on the mechanical properties of the blends were studied.
研究了PPC的添加量、硫化剂的种类及用量、硫化时间、硫化温度和添加炭黑对共混弹性体的物理力学性能、交联度的影响。
Modified emulsified asphalt as a result of slurry seal than the ordinary fast curing time, it can be modified emulsified asphalt slurry seal than the traditional thick slurry seal.
由于改性乳化沥青稀浆比普通的稀浆封层固化时间快，所以改性乳化沥青稀浆封层可以比传统的稀浆封层厚。
The influence factors on surface curing time of silicone rubber release agent vulcanized at room temperature were analyzed by experiments.
通过实验分析了影响室温硫化硅橡胶脱模剂表面固化时间的各种因素。
The composition provides improved and reproducible flow during the early stages of molding without compromising curing time.
该组合物在成型的早期阶段提供改善的和可重现的流动而不损害固化时间。
The effect of rolling condition and O/P value of phenolic resin on the curing time and flowability of phenolic resin for injection molding was studied.
考察了辊压工艺及酚醛树脂的邻对位比值（O/P）对酚醛注塑料的成型时间及流动性的影响。
When curing time increasing, cement stone's elasticity deformation restorability in low stress and plasticity deformation capacity in high stress decreased.
随养护时间的延长，水泥石低压应力下的弹性形变恢复能力和高压应力下的塑性形变能力均降低；
Automatic pressure compensation, adjust the time and deflated deflated the number of heating temperature, curing time.
可自动压力补偿、调节放气时间和放气次数、加热温度、硫化时间等。
The curing time of the mid-coat should be more than 8 hours.
中涂层养护硬化时间约为8小时以上；
The curing time of the mid-coat should be more than 8 hours.
中涂层养护硬化时间约为8小时以上；
应用推荐