A prefix of cylindrical roller bearing codes identifies the design.
一个前缀的圆柱滚子轴承代码标识设计。
Besides, the research of ceramic cylindrical roller bearing is less.
而关于陶瓷材料圆柱滚子轴承的研究则更少。
Wrist pin end carried on double row long cylindrical roller bearing.
连杆小端装有双列长圆柱滚子轴承。
At last, the rigidity of the preloaded hollow cylindrical roller bearing is researched.
最后，又对预负荷空心圆柱滚动体轴承的刚度进行了研究。
But the researches on the hollow cylindrical roller bearing are very late in our country.
而我国对空心滚动体轴承的研究起步较晚。
The needle roller bearing is a cylindrical roller bearing with thin, long rolling elements.
滚针轴承是拥有薄的，长的滚动体的圆柱滚子轴承。
In this way, code NU2308 is obtained for a cylindrical roller bearing with a 40 mm bore diameter (Section 1.6).
用这种方法，获得了NU2308为代码的孔直径40毫米的圆柱滚子轴承(16节)。
In this paper, the design method of full complement with self-retained cylindrical roller bearing is discussed.
讨论满滚子径向自锁圆往滚子轴承的设计方法。
Work spindle with high precision adjustable radial clearance of double row cylindrical roller bearing centering.
工作台主轴采用高精度可调径向间隙双列短圆柱滚子轴承定心。
The results show that the system stability is directly influenced by the radial clearance of cylindrical roller bearing.
结果表明：圆柱滚子轴承的径向游隙直接影响着滚动轴承-双转子系统的稳定性。
And its dynamic load model is proposed on the assumption that there is a virtual roller in the cylindrical roller bearing.
进而提出了圆柱滚子轴承的动态刚度模型和动态阻尼模型。
Finally, the results of stiffness analysis and experiments completed on a high-speed cylindrical roller bearing were given in the paper.
结合具体的高速圆柱滚子轴承给出了刚度分析结果及其与实测结果的比较。
The researches on the preloaded hollow cylindrical roller bearing are much less, no research paper is found about this aspect in the magazine at home by now.
而关于预负荷空心圆柱滚动体轴承的研究更是少之又少，到目前为止，在国内的期刊和杂志上还没有发现关于这方面的研究论文。
It referenced the structural arrangement of similar vehicle, this design transmission bearing according to national standard that choose the cylindrical roller bearing.
参考同类车型的结构布置，本设计变速器轴承按国家标准选择圆柱滚子轴承。
Via analysis of the end wearing of the roller end of the short cylindrical roller bearing, the edges of the inner and outer rings, the corresponding measures are given out.
通过对短圆柱滚子轴承滚子端面、内外圈挡边端磨现象的分析，提出了针对性的措施。
It comprises a double-direction cylindrical roller thrust bearing with two rows of rollers and a single-row full-complement radial cylindrical roller bearing (Figure 1.57).
它包括一个具有两列滚子的双向推力圆柱滚子轴承和单列径向滚子轴承。
Up to the 70s of last century, the hollow cylindrical roller bearing is usually applied in railway locomotives and all kinds of machine tools by the formal Soviet Union and USA.
原苏联和美国在上个世纪70年代才比较多的将空心滚动体轴承应用于铁路机车车辆和各种机床上。
In order not to separate two split inner rings of a double row cylindrical Roller bearing during transportation, installation and adjustment. It should be connected with a connector.
为了使双列圆柱滚子轴承的两个内圈在运输、装折和调整过程中不分离脱开，应采用联结件将其联接。
The utility model relates to a support arm for processing the inner ring of a cylindrical roller bearing, which belongs to the technical field of the bearing technological equipment.
本实用新型属于轴承工艺装备技术领域，涉及一种用于圆柱滚子轴承内圈加工的支撑臂。
Although the exploitation of hollow cylindrical roller bearing could retrospect to a hundred years ago, the effect of hollow roller was widely recognized till the 60s of last century.
虽然空心圆柱滚动体轴承的开发可以追溯至百年以前，但空心滚动体在高速轴承中的作用是在上个世纪60年代才受到广泛的重视。
The structure property, load distribution, selection principle, application scope and points for attention of cylindrical roller bearing used on surface-grinding machine were analyzed.
分析了使用在平面磨床上的圆柱滚子结构、载荷分布、选用原则、使用范围及注意事项。
The complex forces on cage of the high - speed cylindrical roller bearing has been analyzed, and the collision dynamics model and dynamics motion equation of the cage have been set up.
分析了高速滚子轴承中保持架的复杂受力，建立了保持架的碰撞动力学模型和保持架的动力学运动方程。
By improving steel material quality, adopting plastic cage, improving rib structure and using crowned rollers, the life and performance of cylindrical roller bearing can be largely increased.
经改善钢材质量、采用塑料保持架、改进挡边结构及凸度滚子的应用，可使圆柱滚子轴承的寿命和性能大幅度提高。
As one of the key parts of the aeroengine main-shaft, the dynamic performance of high-speed cylindrical roller bearing directly affects the dynamic characteristic and reliability of the mainframe.
高速圆柱滚子轴承是航空发动机的关键零部件之一，其动态特性直接影响着主机的性能和可靠性。
To avoid sliding that occurs in cylindrical roller thrust bearings, the taper Angle of the rollers is selected so the extended contact lines intersect on the bearing axis.
为了避免推力圆柱滚子轴承发生滑动，滚子的锥度要合适以至于扩大的接触线可以与轴承轴相交。
Precisely cylindrical rollers and raceways, however, would lead to peak stresses at the roller and raceway ends (Figure 1.23), which might reduce the bearing life.
然而，精确的圆柱滚子或滚道将会导致在滚子和滚道的边缘产生峰值应力(图1.23)，从而缩减轴承寿命。
The cage which retains the cylindrical rollers of the cylindrical roller thrust bearing is an injection moulded glass fibre reinforced polyamide 6, 6 cage (FIG 6).
保持圆柱滚子推力轴承圆柱滚子的保持架，是注射成型的玻璃纤维增强聚酰胺6.6保持架(图6)。
The latest extension to the sealed spherical roller bearing range includes 11 new variants, with both cylindrical and tapered bore versions available, depending on specific application requirements.
最新的扩展，密封球面滚子轴承范围包括11个新变种，与圆柱和圆锥孔版本，这取决于特定的应用需求。
The latest extension to the sealed spherical roller bearing range includes 11 new variants, with both cylindrical and tapered bore versions available, depending on specific application requirements.
最新的扩展，密封球面滚子轴承范围包括11个新变种，与圆柱和圆锥孔版本，这取决于特定的应用需求。
应用推荐