Based on the analysis of the frame model, we give two algorithms based on deformation.
在对型材模型分析的基础上，我们提出两种基于变形的方法。
The experiment and analysis results show that frame model with truss transfer storey has partial bending shear deformation.
试验和分析结果表明：带桁架转换层框架呈局部弯剪型的变形特性。
Then three-dimensional geological and mechanical model was established, and study of spatial deformation characteristics with FLAC-3D (Fast Lagrangian Analysis of Continua) was detailed.
并建立了相应的三维地质力学模型，应用FLAC 3D快速拉各朗日差分程序对其空间变形特征进行了详细的分析。
Through analysis of biomechanics property of soft tissue, this paper applies the viscoelastic model in the study of soft tissue deformation in surgery simulation.
本文通过对软组织生物力学特性的分析，将粘弹性模型应用于手术仿真中软组织变形的研究。
Adopting linear and nonlinear bearing model, this paper analyses the deformation and stress of bearing with large radius, basing on nonlinear finite element analysis method.
基于非线性有限元分析方法，采用了线性轴承模型和非线性轴承模型分析了大型四点接触球轴承的变形和受力。
A general practical finite element analysis model for two-dimentional elastic large deformation contact problems was established using the TL method.
用TL法分析研究，建立了二维弹性大变形接触问题的一般实用有限元分析模型。
The result indicates the analysis model could effectively solve the door deformation problem and improve the product quality.
结果表明，分析模型能有效解决门体变形问题，提高产品质量。
This article demonstrates that deformation forecast will be performed by a comprehensive method of non linear regression model combined with time series analysis.
本文将讨论综合运用非线性回归模型和时间序列分析的方法进行变形预报。
The analysis of simulated result of the deformation of symmetrical plane proved that the simplified model is reasonable and feasible.
对模拟结果的对称面变形的情况分析论证了模型简化的合理性和正确性。
The polyhedral function fitting method had been used in the analysis of the crustal vertical deformation model.
多面函数拟合法已被应用于地壳垂直形变模型的分析中。
According to the deformation of elastic-plastic theory, the finite element analysis model of metal diaphragm for tank of propulsion system in satellite was established in this paper.
根据弹塑性有限变形理论，用有限元法建立了卫星推进系统贮箱金属膜片变形的有限元分析模型。
Varied curvature makes deformation analysis of curved girder more complex, and seeking simple and reliable mechanics model is of advantage to the study on variable-curvature curved girder.
变曲率导致曲线梁变形分析更加复杂，寻求简单、可靠的力学模型有利于变曲率曲梁的研究。
The analysis of mechanical model shows that the fracture toughness is improved by residual compressive stress of substrate surface, which resists the tensile deformation of substrate.
力学模型分析表明，基体残余压应力以抵抗基体拉伸变形的方式提高了铬层的断裂韧性；
Based on equivalent deformation assumption the back analysis model of determining the viscoelastic parameters of the effect zones is established.
依据变形等效原理，建立了层面影响带的粘弹性参数的反分析模型。
Time series analysis method is a main method by which deformation forecasting model is established in deformation measurements.
时间序列分析方法是建立变形测量预测模型的主要方法。
Through the test analysis of model Bridges, we discuss the static live-load characteristics, the morphology of deformation and dynamic characteristics of the upside suspension bridge.
通过对模型桥的试验分析，讨论了上承吊桥的静力特性、变形形态和动力特性。
The calculation model for creep deformation of furnace shell has been established by analysis on the influence factors of shell creep deformation and ANSYS software.
通过转炉炉壳蠕变变形影响因素的分析和ANSYS软件建立了炉壳蠕变变形的计算模型。
This paper builds up a dynamic analysis method for slope stability, an accelerated deformation prediction model for mid and long-term, and two modifying prediction models for temporary sliding.
此论文描述一个动态边坡稳定性分析方法，预测中长期加速变形规律。同时还包括两个改进的临时滑动预测模型。
The hierarchical analysis theory is used to analyze the sensitivity of the input parameters of the neural network model of ground deformation of shield tunnel and excavation.
运用递阶分析方法，对本文所建立的盾构隧道和基坑工程地面变形神经网络模型中所选用的输入参数进行了敏感性分析，得出预测模型输入参数的敏感性排序。
The two-dimension plane model and the simplification of dynamic loading are applied to create the finite element model for asphalt pavement permanent deformation analysis.
采用二维平面模型，“以静代动”的荷载简化方法，建立沥青路面永久变形有限元分析模型。
In this paper, based on the field investigation and analysis of Daliushu Dam located in Heishanxia Gorge, a part of the Yellow River, the sliding and bending deformation model is built up.
通过实地勘测研究，建立了黄河黑山峡大柳树坝址区岩体的滑移—弯曲拉裂松动变形模式。
The finite element analysis techniques and building model approach, including the mesh convergence study and the selection of deformation parameters etc.
探讨了管道三通塑性失效有限元分析中的建模技术，包括变形参量选取，网格收敛性研究等。
According to the analysis results, the model structure and part parameters were optimized to improve the press and deformation distribution.
然后针对模型有限元分析结果，改进模型结构改变部件参数来消除应力集中和变形过大的现象。
The analysis model of seismic response and earthquake induced permanent deformation of dam is established with the 3-d nonlinear FEM.
采用三维非线性动力有限元分析方法，建立了坝体的地震反应和地震永久变形的分析模型。
Finally, a practical fractal permeability model to applied in consolidation analysis, the permeability model can simulate the permeability changing with the deformation of media.
最后，在给出的固结算例中采用一个较为实用的分形渗透系数模型，该模型可模拟渗透系数随介质变形而变化。
The spiral spring deformation formula and coefficient of stiffness are directly derived by aiding dimensional analysis and 2d model of spiral spring deformation mechanism.
借助于量纲分析及螺旋弹簧变形机理的二维模型，直接推导出螺旋弹簧的变形公式与劲度系数。
Looking the model parameter of ar (1) model as the status vector, using Kalman filter method to analysis the deformation of dangerous rock mass.
将AR(1)模型的模型参数作为状态向量，用卡尔曼滤波法进行危岩体变形分析。
The lateral deformation of multistory frame structure may mainly be shearing displacement between stories, and shearing model between stories may frequently be adopted in analysis of rigidity matrix.
多层框架结构侧向变形主要为层间剪切变形，其刚度矩阵常采用层间剪切模型；
One . On the precondition of mastering ANSYS, establish a suitable model based on the deformation characteristic of 4-high mill which can satisfy the precision of calculation and analysis request.
在充分了解掌握ANSYS的基础上，依据四辊轧机辊系变形的特点建立满足精度且又便于计算分析的设计计算模型。
One . On the precondition of mastering ANSYS, establish a suitable model based on the deformation characteristic of 4-high mill which can satisfy the precision of calculation and analysis request.
在充分了解掌握ANSYS的基础上，依据四辊轧机辊系变形的特点建立满足精度且又便于计算分析的设计计算模型。
应用推荐