The deposition rate was decreased with increased of the temperature.
沉积速率随温度的增加而减少；
The highest deposition rate was found in WW rats who have active fore metabolism.
骨氟沉积也以骨代谢最活跃的幼年大鼠最高。
Effects of composition in solution and process conditions on deposition rate were studied.
研究了镀液组成及操作条件对沉积速率的影响。
Influences of Oxygen Partial Pressure and Deposition Rate on Residual Stress of YSZ Thin Films.
氧分压和沉积速率对YSZ薄膜残余应力的影响。
An electroless nickel plating process with high deposition rate was optimized by orthogonal test.
通过正交试验法优选出一种具有高磷含量的快速化学镀镍工艺配方。
The relationships of current density with deposition rate, crystal size and hardness of deposit were studied.
研究了电流密度与沉积速度、晶粒尺寸及镀层硬度的关系。
The effects of reaction temperature and chloride concentration on the deposition rate of metal are also discussed.
同时还讨论了反应温度和氯化物浓度对金属沉积速度的影响。
An electroless deposition technique on carbon fiber with higher copper deposition rate and stability was presented.
提出了一种有较高沉铜速率和稳定性的碳纤维化学镀技术。
In the design of sand basin, the first problem is to select the calculation method of suspended silt deposition rate.
设计沉沙池时，首先要解决的问题之一是悬移质泥沙沉降计算方法。
The deposition rate and coating thickness were determined, and the effects were compared with those of electroplating.
对镀速和镀层厚度进行了测定，并与电镀进行了效果比较。
An apparatus is presented in this paper, designed for the synthesis of diamond films at a rather high deposition rate.
设计了一种以较高速度合成金刚石薄膜的装置。
To realize high deposition rate is an important problem in low-cost industrialization of microcrystalline silicon solar cells.
实现高速沉积对于薄膜微晶硅太阳电池产业化降低成本是一个重要手段。
Experimental results show that the deposition rate of silicon film strongly depends on silane pressure and substrate temperature.
实验结果表明，非晶硅的沉积速率与气室气压和基片温度密切相关。
Oral deposition rate of aspiration corticosteroid is 80 ~ 90%. The deposition is the main cause of local and total body side effects.
吸入糖皮质激素的口腔沉积率约为80 ~ 90 %，是引发局部和全身副作用的主要原因。
Hot cathode chemical vapor deposition method was established in order to deposit high-quality diamond films with high deposition rate.
为快速沉积高品质金刚石膜，建立了热阴极等离子体化学气相沉积方法。
The concentration and deposition rate of the films are controllable with the optimization parameters on the RFMS-4 sputtering apparatus.
用RFMS-4射频磁控溅射仪制备纳米多层膜技术稳定可靠，在优化工艺条件下能保证薄膜成分和溅射速率的稳定性。
Thus, using this CVD configuration a relatively high deposition rate can be achieved while obtaining desired levels of coating uniformity.
因此，使用所述CVD配置可达到相对较高的沉积速率，同时获得所要程度的涂层均一性。
Molten steel flow field in tundish nozzle and influence of some factors on deposition rate were researched by method of numerical simulation.
采用数值模拟方法，对水口内钢水流场形态以及各种因素对水口沉积速率的影响作了分析研究。
In the end, a simple example was given, in which the total deposition rate was constant and the change law of refractive index was linearity.
最后以混合介质膜的总沉积速率为常数、折射率按照线性变化为例进行了说明。
The effect of rare earth elements such as cerium, lanthanum and yttrium on electroless deposition rate of cobalt-nickel-boron alloy was studied.
研究了稀土元素铈、镧、钇对化学镀钴-镍-硼合金沉积速度的影响。
Results: The deposition rate and crystallinity of HA treated by the heat-organic layers treatment were better than those by alkali-heat treatment.
结果：热有机膜处理后的镁合金，其羟基磷灰石的沉积速度和结晶度都优于碱热法。
The polymer structure was characterized with IR and XPS. The effect of NH_3 added gas on polymer composition and polymer deposition rate was studied.
用IR、XPS对聚合物结构进行了表征，研究了NH_3添加气体对聚合物组成和淀积速率的影响。
The effects of the flow rate of oxygen and pulse bias voltage on the structure, deposition rate and the surface morphology of thin film were studied.
研究了氧流量和脉冲偏压对薄膜相结构、沉积速率、表面形貌、薄膜硬度的影响。
By simulation of thin films growth, some microscopic processes can be revealed in extreme condition, such as high temperature and high deposition rate.
在该模型中，我们考虑了沉积速率、沉积温度以及沉积角度等影响薄膜生长的参数。
MPE technique shows remarkable advantages such as single precursor, wide choices of source materials, high deposition rate, and no subsequent annealing.
MPE制备薄膜技术采用单一先体溶液，源物质来源广泛，沉积速率快，不需后续热处理。
Factors affecting stability and deposition rate of electroless Cu are investigated and proper formulation and process for electroless Cu bath determined.
研究了影响化学镀铜镀速和镀液稳定性的诸因素，并根据实验确定了适宜的化学镀铜液配方及其工艺。
It has a fast deposition rate and surface cleaning features, in particular strong adhesion with the film, diffraction, and can be coated material widely and so on.
它具有沉积速度快和表面清洁的特点，特别具有膜层附着力强、绕射性好、可镀材料广泛等优点。
Large current hot cathode glow discharge was used for plasma chemical vapor deposition of diamond films. It improved deposition rate and films quality efficiently.
大电流热阴极辉光放电用于等离子体化学气相沉积金刚石膜，有效地提高了沉积速率和膜品质。
The influences of the sputtering power on deposition rate, film structure, and contact performance of the film prepared on CdZnTe substrate have been investigated.
系统地研究了溅射功率对沉积速率、薄膜结构、组织形貌及接触性能的影响。
The influences of the sputtering power on deposition rate, film structure, and contact performance of the film prepared on CdZnTe substrate have been investigated.
系统地研究了溅射功率对沉积速率、薄膜结构、组织形貌及接触性能的影响。
应用推荐