Designed in accordance with the subject's main task is the design of injection mold lid.
根据题目设计的主要任务是盒盖注塑模具的设计。
Intelligentized and automation design of injection mold is a great development of mold CAD technology.
注塑模的计算机智能化、自动化设计，是模具CAD技术的一个飞跃发展。
Introduced the structure of medical soft plastic tube; and technology analysis; and structure design of injection mold and mold work principle.
介绍了医用软管塑件结构、工艺分析、注射模结构设计及模具工作过程。
Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.
以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。
It was concluded from practical experience that structure of the mold was stable, reliable and efficient. It provides a good reference for the design of injection mold for similar parts.
经生产验证，模具结构稳定可靠，效果很好，对类似产品的注射模设计有很好的参考价值。
Analyzed the influence of the plastic part injection molding process to part quality, introduced design of injection mold, mold parting structure design and mold temperature control design.
分析了塑件的成型工艺及模具注射成型对塑件质量的影响，介绍了浇注系统的设计，模具分型结构、模温控制的设计。
Mold parting direction is an important factor to verify the moldability of a molded part and its determination is the first step to achieve automatic design of injection mold or casting die.
判定脱模方向是实现模具自动设计的第一步，也是评估塑件或浇注件能否模具成型的重要因素。
Introduced structure design of injection mold for a fragrance cap, the molding parts surrounding exterior surface does not allow to have the draft, causing the plastics demoulding difficulties.
介绍了一款香水瓶盖注射模设计。该塑件周边外观面不允许有脱模斜度，从而使塑件脱模困难。
Design and manufacture points of injection mold of the special-shape coil skeleton were briefly introduced.
简要介绍了异型线圈骨架注射模哈夫结构的设计和制造要点。
This paper introduced the injection mold design of the Polyurethane elastomer.
介绍聚氨酯弹性体的注塑模具的设计。
Introduced design and manufacture methods of injection mold of injection nozzles for plastic buckets, described the mold working process.
介绍了注胶桶的注胶嘴注射模的设计制造方法，并阐述了该模具的工作过程。
Both the design key points of injection moulding mold of chopsticks basket and the working procedure of mold are introduced separately.
分析了筷笼的塑件工艺特点，介绍了筷笼注射成型模设计要点及模具的工作过程。
The technological characteristics of the plastic parts with thin shell were analyzed. the design of the injection mold structure was introduced. and the working process of the mold was stated.
分析了薄壳类塑料产品的工艺特点，介绍了该类产品注射模的结构设计，并说明了该模具的工作过程。
The subject of Orange drums Cup injection mold design, and to consolidate and deepen the learning, has been fairly satisfied with the results, achieved the desired design intent.
本课题通过对中控盒挡板的注射模具设计，巩固和深化了所学知识，取得了比较满意的效果，达到了预期的设计意图。
Design and manufacture methods of injection mold for the defecator body were introduced, and working process of mold was stated.
介绍了清净管体注射模的设计与制造方法，并阐述了模具的工作过程。
The design and characteristics for the double stripper mechanism of the injection mold arc introduced.
介绍当塑料件留在动或定模中时，注射模双脱模结构的设计及其特点。
The key of the injection mold for lens was the design of the runner system, exhaust system, rigidity, the choice of proper material and correct heat-treatment.
镜片注射模设计的关键在于浇注系统、排溢系统、模具刚度的设计及模具材料的选择、热处理。
The injection mold cooling system design is very important to improve the mold design and manufacture of standard and quality of products.
注塑模具冷却系统对于提高模具的设计制造水平和制品的质量是非常重要的。
The design and manufacture method of spring pressed cover injection mold are introduced, and the working process of this mold is stated.
介绍了弹簧压盖注射模具的设计与制造方法，并阐述了该模具的工作过程。
The vibration injection molding and mold design method are discussed by the application of the mechanical vibration technology in the injection molding of plastics.
通过对机械振动技术在塑料注射成型中的应用，探讨振动注射成型工艺及其模具设计方法。
The design steps of injection mold for the shaver frame were introduced in detail, mainly introduced the slide core-pulling mechanism.
详细介绍了剃须刀头架注射模设计过程，重点介绍了滑块抽芯机构设计特点。
Experienced by manufacture, it proves that the mold's structure is feasible and reliable, and can be a good reference to the injection mold design of similar products.
经生产验证，该模具结构设计合理、可靠，对类似产品的注射模设计有很好的参考价值。
According to the wide application of slide block design in injection mold, introduced in detail structure types and design points of injection mold slide block.
针对注射模中滑块结构的广泛应用，详细介绍了注射模滑块的各种结构类型与设计要点。
The design of the injection mold of multiple points, plates and molded surfaces is simplified by using lock catch facility, joined tie-bar structure and decreasing the guide-pin amount.
应用锁扣装置、组合拉杆结构，减少导柱数量，简化了多点多板多分型面注塑模具的设计。
The intellectualized choice of the ejection fashion of the injection mold and the three- dimension parameter of the structure design are realized.
实现了注塑模具脱模方式选择的智能化和结构设计的三维参数化。
Gas aid injection moulding procedure is summarized and its applying area is introduced, as well as, injector structural design of gas injection moulding mold is mainly stated.
介绍了气辅注射成型过程概述及其一般应用范围，重点论述了气辅注射成型模具进气针结构设计。
At the same time, introduce the principle of side core-pulling mechanism of gear and rack injection mold, and design gist of a rack.
掌握长抽距或斜抽芯塑件的结构工艺分析及抽芯距、抽芯力的计算，齿轮、齿条注射模侧向抽芯机构的原理和齿轮、齿条设计要点尤其关键。
Based on the analysis of the structure characteristics of the plastic product with inner concave loop slot and the mold design projects, an injection mold for this kind of part was designed.
在分析环槽形内侧凹塑件结构特点及模具设计方案的基础上，设计了此类塑件的注射模。
Based on the analysis of polymer flow in mold filling, the important role of computer aided analysis in injection mold design is presented through concrete examples.
本文在分析注塑模充模流动的基础上，通过具体实例，阐述了计算机辅助分析在模具设计中的作用。
Based on the analysis of polymer flow in mold filling, the important role of computer aided analysis in injection mold design is presented through concrete examples.
本文在分析注塑模充模流动的基础上，通过具体实例，阐述了计算机辅助分析在模具设计中的作用。
应用推荐