The mirrors here are coated with a multilayered dielectric film having a reflectance of over 99%.
这儿的反射镜上镀了一层多层介质膜，因而反射比超过99%。
The numerical result shows that there is self similarity in the reflectivity of dielectric film system.
结果表明，多标分形介质膜系的反射率具有分形的自相似特征。
The phenomenon of fingerprint discharge along the dielectric film surface is observed by dynamic method.
利用动态指纹提取方法观察到了手指在介质层表面产生的沿面放电现象。
The interlayer dielectric film formed by the method has a low dielectric constant and shows superior mechanical properties.
由本方法形成的层间电介质膜具有低介电常数并显示出优良的机械特性。
A treating agent composition for increasing the hydrophobicity of an organosilicate glass dielectric film when applied to said film.
一种当施用至所述薄膜时，能增加有机硅酸盐玻璃介电薄膜疏水性的处理剂组合物。
Disclosed herein is a method for forming an interlayer dielectric film for a semiconductor device by using a polyhedral molecular silsesquioxane.
此处公开了一种使用多面体分子倍半硅氧烷形成半导体器件所用的层间电介质膜的方法。
Starting from the rate equations and the theory of multilayer dielectric film, a dynamic transfer matrix model of vertical cavity semiconductor optical amplifiers (VCSOAs) was established.
从速率方程和多层介质膜理论出发，构建了垂直腔半导体光放大器(VCSOA)的动态传输矩阵模型。
Dielectric thin film was an important kind of electronic thin films, which has wide applications in microelectronic and photo-electronic technology.
介电膜，是一种重要的电子薄膜。在微电子技术和光电子技术中有着广泛的应用。
In the detector based on surface plasmon wave resonance, the metal film contacts the detected material directly. A dielectric layer is coated on the metal film to protect it.
基于表面等离子体波共振技术的探测器中金属膜通常与被探测物直接接触，在金属膜和被探测物之间增加一层介质膜，可以对金属膜进行保护。
The results showed that high dielectric constant and low loss BST film can be fabricated using this method without special anneal process.
使用这种方法不需要专门的退火工艺，就可以制备晶体结构完整的高介电常数BST薄膜。
The modified effective dielectric theory and multiple layer film theory are employed to calculate the reflection spectrum of this kind of surface.
运用修改过的有效介质理论及多层膜理论计算了这种表面的反射率谱，并将结果与实测值进行了比较。
Nodule defects on dielectric multi-layer optical thin film are key factors resulting in laser-induced damage.
在多层介质薄膜中，节瘤缺陷是影响薄膜激光损伤的关键因素。
Harmonized system of quality assessment for electronic components. sectional specification. fixed metallized polycarbonate film dielectric d. c. capacitors.
电子元器件质量评估协调体系。分规范。直流金属化聚碳酸酯薄膜固定电介质电容器。
The polypropylene film as the dielectric and aluminum foil as the electrode, series structure, epoxy resin coated and radial CP wire.
采用聚丙烯膜作介质，铝箔作电极卷绕而成的串联结构型式，环氧树脂包封，单向引出。
Test result of dielectric strength, partial discharge and endurance property are analyzed and contrasted between solid dielectric is two film and tree film in model capacitor elements.
本文比对分析了极间介质为两层膜和三层膜的模型电容器元件的介电强度、局部放电性能以及耐久性能的试验结果。
The products are made of polypropylene film as the dielectric, metalized film as the electrode, non-inductive construction, encapsulated in a plastic sealed with epoxy resin.
聚丙烯膜作介质，金属化膜作电极卷绕而成，无感结构，阻燃环氧树脂封装，阻燃塑料外壳。
It was swiftly to obtain the thickness of alumina film by using of it's dielectric property and capacitor model, which was validated by means of EM, electric quantity and volt-ampere.
通过自制的铝电解电容器模型，利用氧化铝薄膜具有的介电性能，通过电容量法可以准确快捷地计算氧化膜的厚度，并通过显微直接观察法、电解电量法、伏安法进行了验证。
The reasons of high voltage organic dielectric capacitor should not available to be metallized are analyzed in the paper, including high energy, polarization thin film and high loss.
说明了高压有机介质电容器不宜采用金属化的三个原因：能量高、化膜薄、耗大。
Structure: adopting po1yeser film as dielectric al foil as electrode and inductive construction unidirectional lead diaphanous epoxy resin dip sea1de.
结构：采用聚酯膜作介质，铝箔作电级，有感结构，单向引线，透明环氧树脂包封。
Detail specification for polystyrene film dielectric capacitors, extended foil - Rectangular non-metallic case, unidirectional terminations - Full plus additional assessment level.
聚苯乙烯薄膜介质扩展箔电容器详细规范。单向端接矩形非金属壳。全面附加评定级。
PPS are non-inductively wound with polypropylene, dielectric and metallized polypropylene film in series with aluminum foil for electrodes using copper-clad steel leads anf epoxy resin coating.
PPS为非感应式，用聚丙烯电介质和镀金属聚丙烯薄膜串联以铝箔为电极绕制而成，导线采用镀锡铜包线，采用环氧树脂包封。
Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification: Fixed metallized polyphenylene sulfide film dielectric chip d. c. capacitors. Assessment level EZ.
电子设备用固定电容器。第20-1部分：空白详细规范：金属化聚苯硫醚膜介质直流片式固定电容器。评定水平EZ。
The time domain dielectric spectroscopy for polyethylene terephthalate (PET) film and glass samples is studies.
对涤纶(PET)和玻璃的时域介电谱进行了研究。
The polypropylene film as the dielectric and aluminum foil as the electrode , non-inductive construction, epoxy resin coated and radial CP wire.
采用聚丙烯膜作介质，铝箔作电极卷绕而成，无感结构，环氧树脂包封，单向引出。
Inductive Metal Dielectric filter film is applied in the design of layers.
滤光膜系采用诱导金属—介质膜。
The multilayer dielectric thin film reflector fabricated by top-down nano-fabrication processes can be used to realize the spectral reshaping of high power chirped pulses.
利用反应离子束刻蚀等微纳超精细加工而成的多层电介质结构反射镜可在高功率条件下实现啁啾脉冲的光谱整形。
The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.
极间介质为易于浸渍的表面粗化聚丙薄膜，特别提高了大容量电容器的可靠性。
This capacitor adopt polyester film as dielectric.
该电容器采用聚酯薄膜作介质。
This capacitor adopt polyester film as dielectric.
该电容器采用聚酯薄膜作介质。
应用推荐