Based on direct drive servo motor CNC bending machine technology is an emerging technology.
基于伺服电机直接驱动的折弯机数控技术则是一门新兴的技术。
Compact installations possible thanks to optimum cooling, aluminium design and direct drive.
由于最佳的冷却效果、铝制设计和直接驱动，因此安装紧凑。
Rotary, linear, and direct drive servomotors are available in 110, 230, and 480 VAC options.
旋转的、线型的和直接的驱动补助马达间接变速装置都可从110， 230和480 VAC中得到。
Direct Drive NC Table; Unequal Teeth Tips Width; Dual-Rotor; Phase Shifting; Repetitive Control.
直接驱动数控转台；不等齿顶宽；双转子；移相技术；重复控制。
An adaptive friction compensation scheme for direct drive valve was proposed based on LuGre model.
针对直接驱动阀阀芯摩擦力，论述了基于模型的摩擦力自适应补偿。
The dissertation mainly discusses the servo stiffness of direct drive NC rotary table servo system.
本文主要研究了直接驱动永磁同步电机转台系统的伺服刚度问题。
Direct Drive Screeners are designed for scalping and dedusting the product in a cost effective way.
“直线驱动筛分机”是为简单的大颗粒筛除和去除废品粉料而设计的低成本设备。
The direct drive feed system by linear motors is an ideal solution to realize the high-speed system.
直线电机驱动的进给系统是实现数控机床进给高速化的新形式。
Pump and motor mounted on a common chassis, through the flexible coupling from the motor direct drive.
泵与电机安装在共同底盘上，通过弹性联轴器由电机直接驱动。
Direct drive means the motor is attached to the bowl and controlled electronically - there's no gearbox.
直接驱动电机的手段是重视碗和控制电子-有没有变速箱。
Direct Drive Industrial Fan models have a blade diameter of 36 ", 8 "rubber wheels and a 15 'conductor cord.
直接驱动工业风扇有叶片直径为36英寸，8英寸橡胶轮和15英尺软线。
In this paper, a novel double-stator hybrid direct drive motor scheme is presented with series magnetic circuit.
该文提出一种串联磁路结构双定子混合式直接驱动电动机方案。
Robust cast iron valve body with a fabricated rotor, polyurethane adjustable replaceable blades and a direct drive.
铸铁阀体配合支架式转子，聚酯易拆除叶片和直驱方式。
Two direct drive motors integrated with high resolution encoders and linear voice coil motor are used as driving parts.
机器人采用两个集成了高分辨率角位移反馈元件的旋转直接驱动电机和直线音圈电机作为驱动元件。
In this paper, the research object is the position controller of a permanent magnet linear motor direct drive feed servo system.
本论文以超精密机床用永磁同步直线电机驱动进给伺服系统位置控制器为研究对象。
This paper describes control of a high performance variable reluctance motor for direct drive robotics and industrial automation.
本文介绍了一种用干直接驱动机器人和工业自动化领域的高性能变磁阻电机的控制。
Adopting permanent magnet linear synchronous motor (PMLSM) direct drive is one of necessary approaches of realizing high precision.
采用永磁同步直线电机直接驱动是实现机床高精度进给的必要途径之一。
Their design is optimized for synchronous speed direct drive applications thus avoiding unnecessary and expensive construction features.
在设计上对同步直接驱动的应用进行了优化以避免不必要以及昂贵的工程设计。
The actualization method of the direct drive electro-hydraulic servo system was introduced, and the mathematic model of the system was built.
介绍了直驱式电液伺服系统的实现方案，并建立了系统的数学模型。
The paper deals with a linear direct drive mechanism of electrode for electrical discharge machining (EDM) and its drive and control principle.
在介绍椭圆微驱动电火花加工机理的基础上，分析了椭圆微驱动器对驱动电路的要求。
Abstract: The paper deals with a linear direct drive mechanism of electrode for electrical discharge machining (EDM) and its drive and control principle.
文摘：在介绍椭圆微驱动电火花加工机理的基础上，分析了椭圆微驱动器对驱动电路的要求。
The principle of forging hydraulic press by pump direct drive is introduced in this paper, the math model, control method and strategy are also described.
介绍泵直接传动的锻造液压机工作原理，对其控制机理、数学模型、控制策略进行了研究，并成功地应用于生产实践中。
This paper presents a new converter control algorithm for the direct drive permanent magnet wind generator under the unbalanced three-phase source voltage.
提出了一种用于电网侧三相电压不平衡情况下的永磁直驱式风力发电机的逆变控制算法。
It is demonstrated that direct drive electro-hydraulic servo system can replace the traditional electro-hydraulic servo system in the low frequency response.
结果表明，在频响不高的场合直驱式电液伺服装置完全可替代传统的电液伺服装置。
The device by the human operator launches, such as through the cone-shaped gear reducer drive, direct drive valve stem up and down movement of the valve gate.
本装置由人力操作手轮，通过锥形齿轮等减速传动，直接驱动阀门阀杆上下移动，启闭阀门。
So, this project adopts the realization scheme of double-pass raster monochromator plus direct drive and direct reading of the raster's angle position to control.
因此，本设计采用双通光栅单色仪加直接驱动直接读取光栅角位置控制的实现方案。
Bring forward researchful content and clue of direct drive multiple axes rotary spindle head for CNC milling machine by torque motor that is a new type driving technique.
提出了力矩电动机直接驱动五轴联动数控铣床双摆头这一新型驱动技术的研究内容和研究思路。
Direct drive of the application rollers, separate direct drive of the doctor rollers, precision glue dosing due to speed difference between application and doctor roller.
施胶辊直接驱动，配辊单独驱动，根据施胶辊和配辊之间不同的进料速度精确给胶。
Direct drive of the application rollers, separate direct drive of the doctor rollers, precision glue dosing due to speed difference between application and doctor roller.
施胶辊直接驱动，配辊单独驱动，根据施胶辊和配辊之间不同的进料速度精确给胶。
应用推荐