This paper introduces an project case of Chemical Method in Electroplating Wastewater Treatment.
本文介绍化学法处理电镀废水的应用实例。
Natural rectorite was modified to treat electroplating wastewater with high efficiency and low cost.
为了高效廉价地处理电镀废水,对天然累托石进行处理制备成改性累托石。
Natural diatomite was modified to treat electroplating wastewater with high efficiency and low cost.
为了高效廉价的处理电镀废水,对天然硅藻土进行处理制备成改性硅藻土。
More and more electroplating wastewater is generated with rapid development of electroplating industry.
随着电镀工业的迅猛发展,将会有越来越多的电镀废水产生。
For example, recycle the heavy metal from the electroplating wastewater and etching waste. And reuse Wastewater.
重金属废液处理(电镀废液、蚀刻废液等重金属回收及废水回用)。
A typical industrial example of chelating precipitation to treat electroplating wastewater is reported in this paper.
介绍了一个采用螯合沉淀法处理电镀废水的典型工业实例。
Nowadays the technology of electroplating wastewater treated by microbiological method has been paid more and more attention to.
微生物法处理电镀废水技术倍受关注。
But we are still short of a practical and economy treatment process aiming at the comprehensive electroplating wastewater nowadays.
但现阶段综合电镀废水的治理缺乏实用经济的工艺。
Modified acrylic fiber adsorbent was prepared for the efficient treatment of the electroplating wastewater containing heavy metallic ions.
为了有效地处理含重金属离子的废水,制备了改性聚丙烯腈纤维吸附剂。
The electroplating sludge is one kind of solid wastes from disposal of electroplating wastewater, including various heavy metallic elements.
而电镀污泥是电镀废水处理后产生的固体废弃物,含有多种重金属元素。
Vermiculite was also applied to treat the electroplating wastewater and the result shows that vermiculite can be used to industry wastewater treatment.
通过蛭石对实际废水的处理结果表明蛭石可以用于实际废水的处理。
The article is connected with the treatment of dyeing wastewater and electroplating wastewater. It shows us the conception of modularity wastewater treatment.
结合印染废水和电镀废水的治理、提出了模块化治理污水的概念。
The method of chemical deoxidization was used to treat electroplating wastewater which contains chromium ions, and sodium pyrosulfite was used as reducing agency.
采用化学还原法处理含铬离子污水,焦亚硫酸钠作还原剂。
It has a remarkable effect in treating chromium containing wastewater and zinc, copper, cadmium cyanide, phosphorous, oil, etc. in mixed electroplating wastewater.
对电镀含铬废水及混合废水中的锌、镍、铜、氰化物、磷、油等污染物有显著的治理效果,是较理想的电镀混合废水治理新工艺。
The process flow and engineering operation of this recycling system which runs stably is introduced. It exploits a new way for the reuse of electroplating wastewater.
介绍了这种回用系统的工艺流程及工程运行情况,该系统运行稳定,为电镀废水回用开辟了新的思路。
The electroplating washing wastewater is a kind of electroplating wastewater that has complex composition and high toxicity. It would pollute the environment if discharged directly.
电镀清洗废水是电镀废水的一种,其成分复杂,毒性较大,直接排放会严重污染环境。
If Pollutants (such as exhaust gas, wastewater and residue) from electroplating industry aren't disposed well, the environment will be affected and people's health will also be endangered.
电镀工业产生的废气、废水、废渣等污染物如果不妥善处置,会严重影响环境,并危及人们的健康。
The feature of ion exchange vaporization-concentration process used to dispose wastewater produced by electroplating, as well as running effects are introduced.
介绍了用离子交换蒸浓法处理电镀含铬废水的工艺流程特点及处理效果。
Discharge of electroplating cyanogens-containing Wastewater would cause greatly harm to the environment.
电镀废水中含氰废水的排放,对环境会造成巨大的危害。
Wastewater reduction is one of the key goals for implementing clean production in electroplating industry.
废水减量是电镀行业清洁生产审核的重点。
This paper studies the treatment of electroplating CN-contained wastewater by ferrous sulfate, and investigates the elements and the effect of this treatment.
对硫酸亚铁法处理电镀含氰废水进行了试验研究,探讨了硫酸亚铁除氰的原理及其去除效果。
The production process of continuous zinc electroplating for steel wire was composed of wire drawing, heat treatment, pretreatment, zinc plating aid post-treatment as well as wastewater treatment.
铁丝连续镀锌的生产过程由拉丝、热处理、前处理、镀锌、后处理和废水处理所组成。
Using the soluble iron plate as electrode plate, the treatment of electroplating synthetical wastewater at a constant current was studied.
以可溶性铁板为极板恒电流处理电镀综合废水。
As part of a metal processing plant, the pieces of metal plating technology by external organizations, the organization shall identify plating subcontractor wastewater, waste electroplating liquid;
如一个金属零件加工厂,其金属件的电镀工艺委托外部的组织进行,那么组织应识别电镀外包方废水排放、废电镀液等;
Abstract: This paper takes electroplating and PCB wastewater treatment as an example to elucidate the design parameter and operation management of wastewater reuse system.
摘要:本文以电镀、线路板废水为例,阐述了回用系统的设计参数和运行中的问题。
Abstract: This paper takes electroplating and PCB wastewater treatment as an example to elucidate the design parameter and operation management of wastewater reuse system.
摘要:本文以电镀、线路板废水为例,阐述了回用系统的设计参数和运行中的问题。
应用推荐