A new error compensation method is introduced.
改进了误差补偿方法。
To measure rotation error correctly is requisite of realizing error compensation.
正确测量机床主轴误差运动是实现加工误差补偿的前提。
Various compensation programs were studied based on error compensation way of software.
基于软件误差补偿方法，研究了各种补偿方案。
Meantime, an algorithm to the error compensation of the tooth clearance is implemented.
同时，阐述了实现齿隙误差补偿的软件方法，并采用软件方法加以实现。
The micro compensation device for the boring cutter is the key technique to realize error compensation.
镗孔刀具微量补偿装置是实现误差补偿的关键技术之一。
On the basis of above research, the measuring error compensation method for free-form surface is proposed.
在此基础上，进一步提出了自由曲面测量误差的补偿方法。
This paper introduces a new technique of nonlinear error compensation: the continuous analogue compensation.
提出一种新的模拟信号非线性校正技术——连续模拟补偿法。
Autofocus generally encompasses two distinct steps, i. e. phase error estimation and phase error compensation.
自聚焦主要由两个重要步骤组成，即相位误差估计和相位误差校正。
To validate the validity of the algorithm, the simulating example of the error compensation on sensor was given.
为了验证算法的有效性，给出了传感器误差补偿实例。
This method can offer academic reference for error model and error compensation of other multi-degree motion sy.
本方法可为其他类型的多自由度运动系统的误差建模及误差补偿提供理论参考。
An error compensation strategy is adopted properly to improve the manufacture precision of CNC machine effectively.
为用适当的误差补偿策略做准备，可有效提高数控机床的加工精度。
It can be used as fine control component and static state error compensation or dynamic error compensation component.
它既可作为微进给和微调部件，也可作为工艺系统误差的静态和动态补偿部件。
Then, through the model, we can finish easily the accelerometer's temperature error compensation on the software design.
然后，利用所得到的静态温度模型对该加速度计进行温度误差软件补偿。
A reversal method for error compensation of this system is provided so as to improve the measuring accuracy effectively.
文中提出了利用反转法对系统的误差进行补偿的原理和方法，有效地提高了系统的检测精度。
To realize machining error compensation, it is necessary to measure the rotation error of machine tool spindle correctly.
本文提出了一种机床主轴回转误差补偿信号的实时测量方法。
The method of error compensation for inertial elements in navigation system based on fuzzy optimal algorithm is presented.
阐述基于模糊优化算法的导航系统惯性元件误差补偿方法。
At the same time, establishment the quickly accurate error model is the premise and the foundation for error compensation.
而建立快速准确的误差模型又是实施误差补偿的前提和基础。
This paper presents a method of robot position error compensation and introduces a high precision positioning system of robot.
本文提出了一种机器人高精度定位补偿系统，介绍了一种位姿误差补偿方法。
The accuracy of angular displacement was increased greatly by software error compensation according to the error model and parameters.
根据误差模型及系数，采用软件进行误差补偿，有效地提高了测角系统的精确度。
Error compensation is an effective approach to enhance machining precision, and error modeling is the key factor for the compensation.
误差补偿是提高机械加工精度的有效途径，其中误差的建模是关键。
The system analyses positioning accuracy and movement accuracy and USES error compensation methods to enhance the accuracy of the system.
对系统的运动精度和定位精度进行了分析，用误差补偿的方法提高了系统的精度。
An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.
介绍了一种可提高非球曲面超精密加工机床的轮廓跟踪精度的误差补偿控制方法。
The sample and static error compensation, quaternion and attitude updating and algorithm of station and velocity updating were researched.
研究了采样与静差补偿，以及四元数、姿态、位置和速度更新的算法。
Manufacturing and assembly errors of key geometric parameters are obtained by experiments which supplies basis of machine error compensation.
通过试验，获得了该机床的关键几何参数的加工和装配误差，为机床的误差补偿提供了重要依据。
To improve measurement precision of gyroscope, a novel nonlinear error compensation model is proposed using an algebra algorithm of neural networks.
为了提高陀螺仪的测量精度，基于神经网络代数算法提出一种新的非线性误差补偿模型。
The model provides a new method and means for the geometrical parameter calibration, sensitivity analysis and error compensation of the machine tool.
此模型为串并联型机床敏感性分析、误差补偿和几何参数标定等提供了新的方法和手段。
It is the first time that a converting furnace endpoint prediction model based on an improved BP neural network and error compensation of linear regression.
提出了基于改进的BP神经网络学习算法和自适应残差补偿算法的炼铜转炉吹炼终点组合预报模型。
The establishment of PIGA error model provides a theory basis to implement error compensation effectively and to raised precision of inertial system reliably.
陀螺加速度表的误差模型的建立对实现有效的误差补偿和可靠地提高惯性系统实用精度提供理论依据。
The main research theme of this dissertation is sensor placement optimization and temperature measurement system in thermal error compensation of machine tools.
本文以研究机床热误差补偿中温度传感器的优化布置和新型测温系统的开发为主要内容。
In the technology of thermal error compensation in NC machine tool, selecting the temperature variables rationally is key for setting the model of compensation.
在数控机床热误差控制补偿技术中，合理选择温度变量，是建立补偿模型的关键所在。
应用推荐