A new error compensation method is introduced.
改进了误差补偿方法。
An error compensation method for intelligent electromagnetic compass (IEMC) is studied.
研究了一种智能电子罗盘的误差补偿问题。
On the basis of above research, the measuring error compensation method for free-form surface is proposed.
在此基础上,进一步提出了自由曲面测量误差的补偿方法。
The experimental results show the high accuracy of the sensor and prove the validity of the error compensation method.
测试结果表明敏感器实现了测量精度要求,验证了该误差补偿方法的有效性。
Based on the results of target state estimation error analyzing of this algorithm, this paper gives out an error compensation method.
根据对该算法的目标状态估计误差分析结果,文中给出了一种误差补偿方法。
This paper demonstrate how to increase the rotation precision of the pulley by error compensation method so as to raise the quality of the annealed wires.
该文介绍了如何采用误差抵消法来提高回转的精度,以及退火导线的质量。
The model provides a new method and means for the geometrical parameter calibration, sensitivity analysis and error compensation of the machine tool.
此模型为串并联型机床敏感性分析、误差补偿和几何参数标定等提供了新的方法和手段。
In this paper, a novel method error current compensation of current transformers for high accuracy is presented.
提出了一种以实现高精度为目标的电流互感器误差电流补偿的新方法。
Displaced phase center algorithm is an effective motion compensation method when the motion error along the synthetic aperture is small.
位移相位中心法在合成孔径声呐载体运动误差较小时是一种运动补偿的有效方法。
This paper presents a method of robot position error compensation and introduces a high precision positioning system of robot.
本文提出了一种机器人高精度定位补偿系统,介绍了一种位姿误差补偿方法。
An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.
介绍了一种可提高非球曲面超精密加工机床的轮廓跟踪精度的误差补偿控制方法。
The method of error compensation for inertial elements in navigation system based on fuzzy optimal algorithm is presented.
阐述基于模糊优化算法的导航系统惯性元件误差补偿方法。
The simulation results demonstrate that the fuzzy optimal method has certain validity and feasibility for error compensation of inertial elements in navigation system, it has better practical worth.
仿真结果表明,该模糊优化算法对导航系统惯性元件的误差补偿是可行的,而且是有效的,具有一定的实用价值。
The error calculating method using the homogeneous coordinate transformation matrix together with forward and inverse kinematics and the corresponding error compensation strategies were proposed.
提出了利用齐次变换矩阵和正向、逆向运动学相结合的误差计算方法以及相应的误差补偿策略;
This method can offer academic reference for error model and error compensation of other multi-degree motion sy.
本方法可为其他类型的多自由度运动系统的误差建模及误差补偿提供理论参考。
The realization method of lined error compensation hardware system and the methods of advance its compensation ability by the reasonable selection swatch and by the system study were introduced.
并介绍了在线误差补偿硬件系统的实现方法,以及通过样本的合理选择和系统的学习来提高补偿系统的补偿能力。
The result of proposed modeling method indicates that it can highly improve the robustness, versatility and precision of the thermal error compensation model.
研究结果表明使用本方法可大大提高热误差补偿模型的鲁棒性、通用性和精度。
The tooling compensation method can reduce shape error and improve the shape quality of products.
模具型面补偿方法可以很好的控制曲面形状误差,满足成形精度的要求。
A principle and method for error measuring, compensation and control of grinding processes of ball screws is described.
介绍滚珠丝杠精磨误差的实时测量、补偿和控制的原理和方法。
The unique method of cold junction compensation reduces the error resulted by traditional compensation.
独特的冷端补偿方法有效地减少了冷端补偿引入的误差。
The proper error-compensation method is adopted based on the temperature error model of the accelerometer.
结合加速度计零位和标度因数的温度误差模型,采用了相应的误差补偿算法。
Aiming at dynamic error during measuring pulverized-coal concentration by general heat balance method, a dynamic compensation soft measurement method is introduced.
针对常规热平衡法煤粉浓度测量存在动态误差的问题,提出对一次测量量进行变系数动态补偿的软测量方法。
A method based on recurrent neural network compensation Kalman's evaluation error is proposed in order to enhance the evaluation precision.
为了提高卡尔曼滤波估计精度,提出了一种基于回归神经网络补偿卡尔曼滤波器估计误差的方法。
The method maximizes compensation of system error and the main miss distance test error comes from the test accuracy of the radar itself.
本方法可最大限度地补偿掉系统误差,脱靶量测量误差主要来源于雷达本身测量精度。
The Concept of technics system error compensation is first put forward; its implication, method, principle base, application value and usage notes are presented.
提出工艺系统误差综合补偿概念,阐明其含义、方法、理论依据、应用价值和注意事项。
Lastly, we analyze the reasons of magnetic heading's error and the compensation methods. What's more, we experiment to validate the ellipse hypothesis compensation method.
最后,分析了磁航向误差产生的原因以及补偿方法,并用实验对椭圆假设补偿方法进行了验证。
A reversal method for error compensation of this system is provided so as to improve the measuring accuracy effectively.
文中提出了利用反转法对系统的误差进行补偿的原理和方法,有效地提高了系统的检测精度。
Use method of the least squares to build function relation between temperature and pressure, the space camber compensation method is realized and makes THD measuring error least.
利用最小二乘法,建立过热蒸汽的密度与温度、压力之间的函数关系,实现过热蒸汽的空间曲面补偿法,力求测量误差达到最小。
This paper introduces a kind of new mechanism which can carry out automatic compensation on the locational error of manipulator by the use of analytical designing method.
本文介绍一种用解析法设计的对机械手定位误差进行自动补偿的新型机构。
This paper introduces a kind of new mechanism which can carry out automatic compensation on the locational error of manipulator by the use of analytical designing method.
本文介绍一种用解析法设计的对机械手定位误差进行自动补偿的新型机构。
应用推荐