More often , all of the materials etchant have a finite etch rate.
剂中的材料都具有一定的刻蚀速率。
More often, all of the materials exposed to the etchant have a finite etch rate.
通常，所有暴露在刻蚀剂中的材料都具有一定的刻蚀速率。
It was relative to the etching depths, temperature and the etchant proportion and types.
凸角侧向腐蚀程度与腐蚀深度、腐蚀温度、腐蚀剂配比等诸多因素有关。
The specimen will not etch if the clamp material is more readily attacked by the etchant.
标本不会钳材料蚀刻，如果是更容易攻击的腐蚀剂。
The PI pattern quality is affected by the PI precuring process and the etchant concentration.
聚酰亚胺湿法腐蚀图形的质量受聚酰亚胺的预固化工艺条件和腐蚀液浓度影响。
As some companies make the identification process is used etchant is ferric chloride solution.
作为一些企业的标识制作的工艺是，用作蚀刻剂的是三氯化铁溶液。
Introduce an alkaline copper etchant used for the manufacture of printed circuit boards and the way it works.
介绍了一种在现代印制板生产中使用的碱性蚀刻盐及其工作原理。
Either or both of the etchant or the layers being etched may also be optimized for a particular etching process.
还可针对特定蚀刻工艺将所述蚀刻剂或所蚀刻的层中的任一者或两者优化。
If you don't have a microwave, put the whole bottle of etchant in a sink full of hot water for half an hour first.
如果您还没有微波，把整个一瓶蚀刻在一个水槽充满热水为一个半小时第一。
Experiments further show that the continuous regeneration of acidic copper etchant can be achieved and a high cop...
实验进一步证实，一套以BD D电极为核心的装置可以实现蚀铜液连续再生，并能维持高蚀铜速度。
The etchant penetrates between the fine grains to etch the plate forming countless tiny cells that print in a soft texture.
腐蚀剂在微粒间渗入，把版面腐蚀，造成无数小窝，印出一个柔和纹理。
Resist: coating material used to mask or to protect selected areas of a pattern from the action of an etchant solder or plating.
阻剂：用来选择性保护某图形区域免受蚀刻剂，焊料或电镀影响的涂层材料。
For example, an etchant can be applied to the inner surface 450 through a descender (e. g., descender 130 in FIG. 1a) in the flow-path module.
例如，可以通过该流动路径模块中的下睁部(例如，附图1A中的下降部130)将蚀刻剂施加于内表面450。
After the etchant has etched through the organic resin to expose an underlying surface (12), the etchant is washed from the organic resin and the openings (32).
在蚀刻剂已经蚀刻贯穿有机树脂而暴露出下方表面(12)之后，将蚀刻剂从有机树脂和开口(32)中洗去。
A new method of laser assisted wet etching is proposed, which depends on the etching current characteristic and uniformity of etching image to select the suitable etchant.
提出了一种激光诱导液相腐蚀新方法——利用腐蚀电流特性和腐蚀图像均匀度相结合的方法，选择出适合的腐蚀溶液。
Application of TMAH solutions which is used as etchant in boron etch-stop and anisotropic etching process in the manufacturing of single-crystal and polysilicon pressure sensors is mainly discussed.
介绍了四甲基氢氧化铵(TMAH)溶液的腐蚀特性，论述了在单晶硅和多晶硅高温压力传感器的制作过程中，TMAH腐蚀液在浓硼终止腐蚀和各向异性硅杯腐蚀两个制作工艺中的应用。
Application of TMAH solutions which is used as etchant in boron etch-stop and anisotropic etching process in the manufacturing of single-crystal and polysilicon pressure sensors is mainly discussed.
介绍了四甲基氢氧化铵(TMAH)溶液的腐蚀特性，论述了在单晶硅和多晶硅高温压力传感器的制作过程中，TMAH腐蚀液在浓硼终止腐蚀和各向异性硅杯腐蚀两个制作工艺中的应用。
应用推荐