The adaptable finite element method is used for calculating the pressure distribution of gas film for face seal.
在有关端面密封气膜压力分布的计算中，采用了对几何结构适应性强的有限元素法。
The innovative dishing ring not only possesses end -face sealing capacity, but also has some radial seal and clean function.
改进的碟形密封圈不但具有端面密封能力，而且将具有一定的径向密封和擦拭功能。
Face seal Fittings manufactured by GasFlo Products are compatible with all other high quality face seal components on the market today.
我们生产的密封配件与当今市场上所有高质量的配件一致。
The operation tests of bearing and face seal components in LOX and liquid nitrogen provided accurate data for future engine development.
通过轴承、端面密封组件在液氧、液氮中的运转试验，可为发动机研制提供准确数据。
Other design methods were also presented, such as the face seal at inlet, axial thrust bearing, and its effect to pump efficiency was also discussed.
同时进行了进口端面密封设计、推力轴承设计以及对水泵效率影响的讨论。
Wears performance of mechanic face seal is analysed. Basis law for design and estimation and amelioration of mechanic seal's invalidation is provided.
作者对机械密封端面的磨损特性进行了分析，以指导和改进机械密封的设计及对密封失效的判断。
A new technology of laser surface micro-molding is introduced, and the mechanical face seal ring cross-scale processing of the geometric shape is researched.
介绍了激光表面微造型新工艺新方法，对机械密封环端面进行跨尺度的几何形貌加工工艺研究。
Three kinds of injection sleeves construction, materials, surface treatment and application ranges of floating end face seal ring by die casting are expounded.
叙述浮动端面密封环压力铸造的三种压射套结构、材料和表面处理工艺及其应用范围。
This paper introduces the optical interference and its theory and application on the inspection of high precision flatness of the seal-face of floating end-face seal rings.
本文介绍光干涉条纹及其检测高精度浮动端面密封环密封面的理论与应用。
Great attention paid for designing and applying seal Chambers for mechanical face seals will improve seal performance, prolong their life and increase the machine reliability.
重视设计和使用机械密封的密封箱可以改善机械密封性能、延长密封寿命、提高设备及机泵的工作可靠性。
The results of calculation indicates that the static axial stiffness of fluid film in double spiral groove face seal is improved due to the pressure loss through feeding holes.
计算结果表明， 供液小孔所产生的压力损失提高了双列螺旋槽机械密封的静态轴向刚度。
Seal chamber pressure of a new double spiral groove face seal working under high velocity and pressure conditions may probably be disturbed in operation, which affects the seal stability.
一种用于高速高压等极端工况下的新型双螺旋槽端面密封在实际运行过程中密封腔压力会出现波动，从而影响密封稳定性。
The small perturbation method and the finite element method were used to calculate the stiffness and damping coefficients of a gas film with three degrees of freedom for a gas film face seal.
应用微扰方法和有限元法，对端面气膜密封三自由度微扰下，密封气膜的刚度和阻尼系数进行了数值求解。
As a new non-contacting, no-leaking face seal, in the past few years, the spiral groove seal has been used widely in many fields, such as the aviation-aerospace and the petrochemical industry.
作为一种非接触式并且能达到“零泄露”的新型密封型式，螺旋槽密封在航天航空和石油化工等领域的应用越来越广泛。
This paper presents a face seal structure which is suitable for working at high speed, and analyses the sealing principle, the sealing capability, and the performance characteristic of the seal.
提出一种适用于高速旋转的端面密封结构。对该结构的密封原理、密封能力和工作特点进行了分析；
His face lighted, and he confronted the ragged candidate with this question, "Where lieth the Great Seal?"
他的脸上露出喜色，随即问那衣衫褴褛的候补国王：“国玺在什么地方？”
I've seen people do breath control with gas masks whose rubber edges conform to the face and seal well, regulating the bottom's access to air through the breathing hose.
我见过一些人戴防毒面具，密封完好，施虐方通过控制面具下方的呼吸管来进行游戏。
For motor frame size 180 and above, the inner mechanical seal shall be constructed with a solid block carbon rotating seal face and a solid block silicon carbide stationary seal face.
用于尺寸180以上的电机机架，内置的机械密封结构应该采用一块整体结晶碳旋转密封面和一块整体结晶碳化硅固定密封面。
Mechanical seal: seal face, gasket and shaft seal, etc parts must be undamaged, otherwise will result in over leakage, sure to change parts with wear and tear or damage.
机械密封：密封面、密封垫及轴封等元件必须完好，否则将导致过度泄漏，对有磨损或损伤的元件必须更换。
ANSI flange sealing principle is very simple: bolt two seal face mutual extruding flange gaskets and formed the seal.
ANSI法兰的密封原理极其简单：螺栓的两个密封面相互挤压法兰垫片并形成密封。
Many studies were carried on the technologies and properties of laser cladding on the seal face of valve, but lack of contrast data with plasma spraying Alloy applied at present.
气门密封面激光熔覆的工艺和性能研究较多，但激光熔覆的合金组织和性能与现在气门密封面生产应用的等离子喷焊合金的对比数据较少。
Have resolved the leakage problem through improving quality of seal face, adding diameter of O-ring and other measures.
通过提高密封表面的质量、增加O型圈的直径等措施，解决了渗漏问题。
Seal face geometry parameters can be optimized by analyzing regulation of their effect on opening force and liquid film stiffness.
通过分析端面结构参数对密封开启力和液膜刚度的影响规律，可得到端面结构的优化参数。
The seal of the respirator on the face should be fit-checked prior to wearing in the work area.
在佩带至工作区域前，应对在脸上的呼吸器的密封作适应性检查。
The parametric study demonstrates that substantial hydrostatic pressure can be produced on the seal face with partial micro-pores.
研究表明在部分密封端面上加工微孔可有效增大端面静压。
Compared with any other processing methods, laser technology is a unique way to produce micro-pores on the seal face.
对各种加工方法进行比较可知，在机械密封端面上加工微孔，激光表面处理技术是惟一有效的加工方法。
Compared with any other processing methods, laser technology is a unique way to produce micro-pores on the seal face.
对各种加工方法进行比较可知，在机械密封端面上加工微孔，激光表面处理技术是惟一有效的加工方法。
应用推荐