Wireless operators will pay more for large, contiguous parcels of spectrum, which is why the FCC wants to orchestrate the process.
为购买大容量连续带宽无线运营公司将需要付出更多金钱，这也正是联邦通讯委员会想要精心策划这项进程的原因。
This paper introduced 4 kinds of modified FCC processes for production of clean gasoline, and compared productivity distribution and property of gasoline with traditional FCC process.
介绍了生产清洁汽油的4种催化裂化新工艺，并与催化裂化工艺在产率分布及汽油性质方面进行了对比。
A process in which the selective hydrogenation of butadiene in FCC C4 + fraction and the distillation separation of the fraction take place concurrently to produce butylene.
催化裂化C4 +馏分中的丁二烯选择性加氢和该馏分蒸馏分离同时进行以生产丁烯的一种过程。
In manufacture process of FCC catalysts, viscosity of kaolin slurry influences the manufacturing cost, handling of the slurry and distribution of catalyst particles in the spray during drying.
在FCC催化剂生产过程中，高岭土浆液粘度会对生产成本、浆液输送和浆液在喷雾干燥成形时雾化及雾粒分布等造成一定程度的影响。
Mechanisms to enhance FCC light oil yield and to lower the coke yield(i. e. strengthening FCC process) by adding polymeric active additives in the feedstock were introduced.
介绍了在原料中加入聚合高分子活性添加剂以提高催化裂化轻质油收率、降低焦炭产率（即强化催化裂化反应过程）的机理。
The paper researches into the process condition of high nickel FCC equilibrium catalyst magnetic separation recovery technology industry application.
本文研究了高镍fcc平衡剂磁分离回收技术工业化工艺条件。
This paper describes the principle and process about the local loop-back test on the FCC of MPC8260 microprocessor, including the setting of all the registers and the setup of FCC.
本文详细描述了MPC8260处理机芯片的FCC内环测试的原理和实现流程，并给出了所有的相关寄存器的设置。
And catalysts of higher activity should be developed to fit the new kind of circulating fluidized bed reactor, downer, for the FCC process.
下行床用于催化裂化过程，与之较匹配的应该是具有更高活性的催化剂，研制新型高活性催化剂也是下行床推向工业的重要措施之一。
The results of research and development of flexible multi functional FCC process were introduced.
介绍了洛阳石油化工工程公司开发的灵活多效催化裂化工艺技术应用研究结果。
The transition process model of fluid catalytic cracking unit (FCC) is achieved based on the seven lumped model, whose validity is verified by an example.
以催化裂化装置为例，在七集总模型基础上化简得到催化裂化装置的过渡过程模型，并验证了其有效性。
The Fluid Catalytic Cracking (FCC) is the major gasoline - producing process in refinery.
(流化催化裂化)是炼厂生产汽油的主要方法之一。
The etherification process for FCC naphtha is an effective means to im - prove the quality of the gasoline so as to meet the requirements of both domestic and foreign markets.
催化裂化汽油醚化改质工艺是改善汽油品质，适应国内外市场需要的有效手段。
The paper reviews FCC enrichment regeneration technology, CLAUS enrichment sulphur recovery process and the enrichment technology used in terephthalic acid (TPA) equipment.
综述了催化裂化富氧再生技术、富氧克劳斯硫磺回收工艺和TPA装置富氧工艺。
The FCC process carried out in the apparatus is also described.
还公开了在该装置中进行的FCC工艺。
Catalyst MIP-CGP specially designed and produced for FCC unit revamped with MIP process was tested in Qingdao Petrochemical Branch Co. , SINOPEC.
青岛石油化工有限责任公司（简称青岛石化公司）在重油催化裂化装置上试用了根据M IP工艺改造后的特点而专门设计生产的催化剂MIP-CGP。
Faced the stringent challenge of FCC process, the multi-dimensional reaction structure was pro- posed for FCC process reaction chemistry.
面对催化裂化工艺所遇到的挑战，提出了催化裂化过程反应化学的多维反应结构模式。
The novel FCC process for maximizing iso-paraffin in cracked naphtha is a proprietary technology named as MIP to produce clean gasoline component.
多产异构烷烃的催化裂化工艺(MIP工艺)是具有我国自主知识产权的生产清洁汽油组分的技术。
The etherification process for FCC gasoline is to react methanol with the isoolefines in FCC gasoline to form methyl tert-alkyl ethers on a resin type catalyst, so as to enhance the octane number.
催化裂化汽油醚化工艺是使汽油中异构烯烃与甲醇，在树脂型催化剂作用下醚化生成甲基叔烷基醚类，使汽油辛烷值提高。
The treated water from waste liquid produced in second-process of refining oil can be used on electric desalt unit and FCC 'waste gas washing process.
将炼油二次加工过程中产生的含硫含氨污水经汽提脱硫脱氨后得到的净化水，代替原来使用的除盐水用于原油电脱盐装置和催化装置富气注水。
The impact of process parameters on aromatics saturation reaction of FCC light cycle oil over RN-10 hydrotreating catalyst was studied.
用催化剂RN-10研究了催化裂化柴油加氢深度脱芳烃工艺参数对芳烃加氢饱和反应的影响。
The etherification process of FCC light gasoline meets the requirement of producing clean gasoline, while the basic nitrogen compounds can deactivate the etherification catalyst-sulfonic acid resin.
催化裂化轻汽油醚化工艺适应了生产清洁汽油的要求，轻汽油中含有的少量碱性氮化物中和阳离子交换树脂催化剂的酸性，造成催化剂失活。
Upgrading FCC gasoline through etherification process is a efficient method to upgrade the octane number of gasoline so as to meet the demands of domestic and over - seas markets.
催化裂化汽油醚化改质工艺是提高汽油辛烷值以适应国内外市场需要的有效方法。
The distribution of basic nitrogen compounds in FCC gasoline have no change during sweetening process.
脱臭前后FCC汽油中碱性氮化物种类和分布基本没有变化。
The narrow-cut fractions of FCC LCO hydrogenated by the two-stage process, whose aromatics content is less than 25 %, was studied.
对采用两段法加氢工艺加工某催化裂化柴油得到的芳烃质量分数低于25％的产品柴油窄馏分的性质进行了分析。
On the basis of process simulation and basic theoretical analysis, a new energy saving double-column process is proposed for FCC absorption and desorption system with "bi-directional mass transfer".
在流程模拟和基本原理分析的基础上，指出FCC装置吸收稳定系统吸收解吸过程存在双向传质，提出了一种新的改进型节能双塔流程。
The hydrogenation tail oil obtained from process could be used as superior FCC or hydrocracking feedstock.
加氢尾油可作为优质的催化裂化或加氢裂化掺炼原料。
The characteristics and advantages of the alkylation process for FCC gasoline desulfurizisation are introduced.
综述了FCC 汽油烷基化脱硫的特点与优势。
When non-noble metal catalysts are selected for selective hydrogenation of diolefin, full-range FCC gasoline hydrogenation process is preferred.
当选用非贵金属催化剂时，二烯烃选择性加氢单元应优先采用催化裂化全馏分加氢流程；
Faced the stringent challenge of FCC process, the multi-dimensional reaction structure was pro- posed for FCC process reaction chemistry.
论述了电解金属锰阴、阳极过程的电化学反应并进行了热力学计算。
Faced the stringent challenge of FCC process, the multi-dimensional reaction structure was pro- posed for FCC process reaction chemistry.
论述了电解金属锰阴、阳极过程的电化学反应并进行了热力学计算。
应用推荐