The hardware composition and software flowchart of the CANbus node communication card are described in detail.
对CAN总线节点通讯卡的硬件组成，软件流程做了较详细的说明。
The hardware design block diagram and software flowchart of every part of the intelligentized transmitter are supplied.
给出了智能变送器的各部分电路硬件设计框图和软件流程图。
This article introduces this idea and associated software flowchart.
本文介绍了这一概念及有关的软件设计流程图。
This paper presents the design of temperature transducer based on MCU AT89C55 and DS18B20 sensor. The designed hardware structure diagram and software flowchart of the instrument is given.
本文叙述了基于单片机at89c55、采用DS18B20传感器的温度变送器设计，给出了硬件结构图和软件流程图。
The temperature measuring software flowchart of MCU is provided.
给出了单片机温度测量的软件流程图。
Code to flowchart is an advanced source code to flowchart converter for software engineers and document writers.
代码的流程图，流程图转换器的软件工程师和文档编写者是一种先进的源代码。
The hardware circuit and software flowchart are introduced.
文中阐述了系统的硬件结构及软件框图。
The hardware configuration and the software flowchart of the system are given, and the design principle for adding signals by the monolithic microcomputer discussed.
文中给出了系统硬件构成以及软件的程序框图，讨论了单片机控制产生添加信号的设计原理。
This paper presents the system implementation scheme, which includes hardware architecture, software flowchart, and interface definition.
给出了系统的实现方案，包括硬件结构、软件流程和接口定义。
Based on basic theory of fuzzy control, the realization, design steps and software flowchart of fuzzy control on single-loop digital regulating instrument are introduced in this paper.
结合模糊控制的基本原理具体介绍了模糊控制在单回路数字调节仪表上的实现方法、设计步骤以及软件流程。
The composing principle of hardware, circuits of monitor as well as software function and flowchart are introduced.
介绍了测控仪的硬件组成原理、测控电路以及软件功能和流程。
The paper introduces the principle, hardware structure and software flowchart of the test bed of transmission of road engineering machinery.
介绍了筑路工程机械传动装置试验台的工作原理、件结构和软件流程。
Took LM5Q32 as example, introduced the hardware interface and the flowchart of software for its control using TMS320F240, gave the relevant program.
以LM 5 Q 32为例，介绍了TMS320F 240对该液晶屏进行控制的硬件接口电路以及软件编写流程，并给出了相应程序。
This article introduces a new idea - component structure used in designing the flowchart in software for industry control.
文章介绍了作者在工控软件流程图设计中采用的一种全新的设计思路：部件化结构。
The detecting principle is described in detail. The software flowchart, hardware implementation based on MPU and CPLD/FPGA technology are given.
详细阐述了检测原理，给出了基于MPU与CPLD/FPGA技术的硬件实现和软件工作流程。
According to human scale multifunctional module dominated by the demands of the function programming, Meanwhile the flowchart of the software for a detailed description.
根据多功能人体秤主控模块所要求实现的功能进行编程，同时对软件的流程图进行了详细的叙述。
The hardware composition and software test flowchart of the system are presented, and the partial program coding is given.
详细介绍了系统的硬件组成及软件测试程序流程图，并给出了部分程序代码。
Fig. 11 is a flowchart for a method for enabling a plurality of software application through a device.
图11是使多个软件能够通过某一装置应用的方法的流程图。
This paper describes mainly the use of AT89C52 to realize the design thinking of a portable smart pressure calibrator and the hardware configuration as well as the software flowchart of the system.
本文主要叙述采用AT 89 C52实现的便携式智能压力校验仪的设计思想，系统的硬件组成以及软件实现流程。
This paper introduced time-delay parameter test of time relay, SCM test block diagram and software flowchart.
本文介绍时间继电器延时参数的测试，并对单片机测试框图以及软件流程也进行了相应介绍。
The structure of the control, the control scheme, flowchart and the design of hardware and software are analyzed concretely.
在设计中具体分析了掺混控制系统的结构，控制方式，工艺流程图和软硬件设计。
The emphasis is laid on the discussion of the design of the applied software, with the detailed flowchart of the framed program and the main ordered program.
重点阐述了应用软件的设计思想和较详细地给出了程序流程框图及主程序清单。
The hardware circuit of control system and the flowchart of main control program for software were designed by using PIC single chip (microprocessor).
以pic单片机为核心设计了控制系统的硬件电路和软件流程。
This article discuss the performance of voice synthesis MSP50C32N and process of making voice data, Its design circuit and software flowchart used in application example are given here.
论述了语音合成器MSP5 0C32N的性能，以及语音数据的制作过程，结合应用实例，给出了它的设计电路及软件流程。
The thesis introduced the hardware development of the intelligent residence control systems and the software structure, flowchart and application.
本文介绍了智能化家居控制系统的网络结构、硬件研制情况和软件结构、流程、使用方法。
The communication managing components and the design concept and strategy for device interconnection protocol are introduced. The flowchart of the comm software design is also given.
介绍该系统通信管理部件及设备互连协议的设计思想与设计方案，并给出了COMM软件设计的主流程图。
The hardware composition, software control flowchart, system expansion, and the communication between host computer and PLCs are analyzed in detail.
详细分析了硬件的组成、软件控制流程、系统的扩展和PLC与上位机通信的实现方法。
The operational principle, hardware structure and software design of the self-tuning system of PID parameters based on ADAM5510 are introduced. The flowchart of the software modules is also given.
介绍了基于ADAM5 5 10的PID参数自整定系统的工作原理，硬件结构和软件设计，并给出了模块流程图。
The operational principle, hardware structure and software design of the self-tuning system of PID parameters based on ADAM5510 are introduced. The flowchart of the software modules is also given.
介绍了基于ADAM5 5 10的PID参数自整定系统的工作原理，硬件结构和软件设计，并给出了模块流程图。
应用推荐