Glass bead filled with PP and PE are pseudoplastic fluid system.
玻珠填充pp、PE体系符合非牛顿流体流变行为的指数定律。
Glass bead blasting is acceptable. Steel shot blasting is not acceptable.
可以喷玻璃砂，不可喷钢丸。
The round rate of this kind of glass bead are as high as 90% with very low impurity.
此类玻璃珠的成圆率高达90%以上，杂质含量极低。
This sheeting has excellent entrance angularity, which is typical of encapsulated lens glass bead sheeting.
具有更优秀的入射角，这也正是玻璃微珠的优势所在。
Design structure: the product consists of the chassis, paint hopper, glass bead hopper, and gas fueled system.
结构特点：该产品有底盘、涂料斗、玻璃珠斗、燃气系统组成。
The results showed that the compatibility of hollow glass bead and resin was improved by adding silane coupling agent.
结果表明，硅烷偶联剂改善了空心玻璃微珠与树脂基体的相容性。
The influence of small grain size glass bead (GB) on the properties of linear low-density polyethylene ( LLDPE) was studied.
研究小粒径玻璃微珠的粒径和用量对线形低密度聚乙烯（LLDPE）性能的影响。
The cell structure, compression and damping properties of rigid polyurethane foam filled with hollow glass bead were studied.
研究了加入空心玻璃微珠后，硬质聚氨酯泡沫塑料的泡孔结构、压缩性能以及阻尼性能。
The dynamic mechanical properties of glass bead filled LDPE composites were Iivestigated by using of a dynamic mechanical analyzer.
应用动态力学分析仪，考察了低频条件下玻璃微珠填充LDPE复合材料的动态力学性能。
It introduces some problems that require attention during the design of different glass bead profile, and relative solving methods are carried out.
本文着重介绍了不同的压条在设计中应该注意的各种不同问题及解决方法。
Glass bead profile, one of plastic special-shaped products with small cross-section, ACTS an important role in the process of integrated assembling.
压条是塑料异型材中截面很小的一个零件，但在整体装配中起着举足轻重的角色。
The properties of rigid particle filled polymers, glass bead-filled polypropylene with different interfacial designs are studied through experiments.
本文针对玻璃微珠填充聚丙烯这一刚性粒子填充聚合物复合体系进行了实验研究。
The performances of different impact media were compared. The results show that the glass bead is the best choice of impact media for mechanical plating.
对比了不同种类冲击介质的物化特性，指出玻璃珠是机械镀锌冲击介质的最佳选择。
The stirring, the glass bead breaker, the high pressure cell cracker and the high pressure cracker to break cell for releasing ALDH were investigated and compared.
本文着重考察了搅拌粗提、珠磨破碎、高压细胞破碎仪和高压破碎仪的细胞破碎方法对释放ALDH的影响。
Shopping malls very often sell every type of bead imaginable, the types of beads include seed beads, crystal beads, glass beads, lamp work beads and silver beads, etc.
购物中心总是出售你可以想像得到的各种各样的珠子，包括植物种子做成的珠子、水晶珠子、玻璃珠子、能照明的珠子、银珠子等等。
The utility model is characterized in that a single micro glass bead layer is coated on the peripheral edges of the front side and the back side of the traffic safety satchel.
其特征是在书包正面和背面四周边沿上涂覆单层的微型玻璃珠层。
Besides this paper discusses the sorting principle of micro diameter glass bead and brings forward sorting roundness with motion resistance and knocked-on reflection principle.
此外，还讨论了作为准流体的微径玻璃珠分选原理，提出可通过运动阻力和平面撞击反射原理相结合筛分得到圆形微径玻璃珠。
The modified glass bead can be used in electromagnetic shielding or microwave absorbing materials, and the applicationareas are widened. The application prospects were also analyzed.
改性后的玻璃微珠可应用于电磁屏蔽和吸波材料的制备，拓宽了其应用范围，并分析了其应用前景。
In this paper, the influence of glass bead diameter on single bead and property of retro-reflective fabric are discussed, moreover, it brings forward the conception of glass coverage.
分析了回归反光织物中玻璃微珠直径变化对单个微珠反光强度和回归反光织物反光性能及其他性能的影响。
The experimental study of a gas solid flow pattern and gas diffusion characteristics using polystyol particles and glass bead has been carried out in a pressurized spouted fluidized bed.
在一个加压喷动流化床装置上进行了冷态实验，研究加压条件下床中的气固流动状态和气体在各部分的扩散特性。
The effects of the contents of KH-550 and ester titanate coupling agent and that of glass bead on the compression strength and Martin heat resistant temperature of bismaleimide(BMI)were investigate.
研究了处理剂用量与玻璃微珠加入量对改性双马来酰亚胺树脂压缩强度及马丁耐热温度的影响。
To observe this, a DNA molecule is stretched between a magnetic bead and a glass surface.
为了观察此现象，DNA分子在玻片上由一个磁珠拉伸。
DPFC heat insulated pad is based on PPS resin with middle-empty glass micro - bead and glass fiber as reinforcement.
DPFC隔热垫块是以PPS树脂为基体，以中空玻璃微珠、玻璃纤维作增强材料制得的。
DPFC heat insulated pad is based on PPS resin with middle-empty glass micro - bead and glass fiber as reinforcement.
DPFC隔热垫块是以PPS树脂为基体，以中空玻璃微珠、玻璃纤维作增强材料制得的。
应用推荐