A new method to control elastic yielding wheel in grinding process is presented.
本文提出了一种控制磨削过程中弹性退让的新方法。
Cement grinding process production, environmental air contains high concentrations of dust.
水泥厂生产粉磨加工过程多，环境空气中含粉尘浓度高。
The addition of sodium carbonate into the grinding process can realize the selective desliming.
磨矿过程中添加碳酸钠，可实现矿泥的选择性脱除。
Based on these, intelligent selection of starting parameters for grinding process can be realized.
据此可以实现初始磨削用量智能化选择目的。
Decelerator worm cracking after grinding process was analysed and was identified as grinding crack.
析了减速器蜗杆在磨削加工中产生裂纹的原因，提出了防止措施。
These dimensions vary widely, depending upon the grinding process for which the wheel is to be used.
根据采用砂轮的磨削工艺，这些尺寸变化很大。
The average diameter / size of particles supplied as a powder coating, following the grinding process.
研磨的粉末涂料的粒子的平均粒径。
This conclusion provides theoretical basis for grinding process to decrease blockage of grinding wheels.
该结论为磨削加工过程中减少砂轮堵塞提供了依据。
In grinding process of civil cutter, crack is easy to happen by the reason of grinding, and it causes gap.
民用刀剪在加工过程中，由于磨削等原因，容易产生裂纹，引起刀剪刃口卷裂或产生缺口。
Measure the grinding force in grinding process and compute the grinding energy ratio, analyzing the grinding mechanism.
试验还进行了磨削过程中磨削力的测试和比磨削能的计算，分析了陶瓷材料的去除机理。
A feasibility analysis is made on the method by testing the temperature in grinding process and monitoring grinding burn.
并通过实际磨削测温实验及烧伤跟踪实验对该方法的可行性进行了分析。
On line monitoring for grinding arc temperature is a necessary and important section to realize automation of grinding process.
对磨削弧区温度进行在线监测，是磨削加工自动化中必不可少的重要环节。
Combined with the study of constant force grinding, a self-study method on fuzzy control rules in grinding process is suggested.
结合恒力磨削的研究，提出了一种基于磨削数据的模糊控制规则学习方法。
Block, backplane: high-quality oak molding by the mold pressing, grinding process by profiling, do the multi-layer paint finishes.
座、背板：采用优质橡木经模具热压成型，经仿形打磨工序、做多层油漆饰面。
Comminuting effect in grinding process by using cast iron segment as fine grinding media is studied with comparison to steel ball.
采用普通钢球作为对比，研究磨矿过程中以铸铁段为细磨介质的破碎效果。
But Spain no longer has its own money, which means that it can regain competitiveness only through a slow, grinding process of deflation.
然而，西班牙不再拥有自己的货币，这就意味着它只能通过缓慢而折磨人的通货紧缩来重新恢复竞争力。
TAPER GRIND: Grinding process which produces angled surfaces, may be intentional or unintentional depending on blueprint specifications.
锥度研磨：研磨锥度表面的工艺，很大程度上依赖于蓝图的设计规范。
D real scene of CAM shaft grinding process system is a basic function unit of the CAM shaft virtual reality grinding system in our research.
凸轮轴磨削工艺系统三维实景是本研究中凸轮轴虚拟磨削加工系统的基础功能单元。
The mathematical model is established for the dynamic distributions of dimension errors in bearing grinding process by means of the Grey theory.
基于机械加工误差的特点，利用灰色系统理论建立轴承磨削加工过程尺寸误差动态分析的数学模型。
The basic rules in grinding process has been derived, so as to carry out the proper adjustment and controlment for the circular grinding machine.
导出了磨削过程的基本规律，以便对外圆磨床进行正确调整和控制；
The change in particle size distribution of fly ash in grinding process and its influence on the activity of fly ash are presented in this paper.
研究了粉煤灰在机械磨细过程中粒度分布的变化规律，分析了磨细灰的粒度分布特征对其活性的影响。
Pointing at problems produced in grinding process of bearing rings with double raceways, the dynamic control grinding process method is put forward.
针对双滚道滚动轴承套圈磨削加工过程中存在的问题，提出了动态控制磨削加工法。
The results indicate that increasing the vertical pressure or grinding speed is beneficial to the grinding process of ceramic corundum abrasive belt.
试验结果表明，采用较大的法向压力或适当增大磨削速度等磨削参数，可以高效发挥陶瓷刚玉砂带的磨削性能。
An approach is made on grinding process for varistor and a new dual surface grinding process with through feeding and continuous grinding is proposed.
对压敏电阻的磨片工艺进行了探讨，并提出了一种新的磨片工艺：双端面研磨，采用贯穿送料和连续磨削的方法。
The particle size distribution of coal has self similarity during the grinding process and can be fit by the fractal equation of particle size distribution.
在煤的粉碎过程中其粒度分布具有自相似特征，可以用粒度分布的分形模型来拟合煤粉碎过程中的粒度分布特征。
By experiment and production practice, it was pointed out that such crack could be prevented by control of pick forming, heat treatment and grinding process.
试验与生产结果表明，提高粗加工挑扣成形质量、改善热处理组织、控制磨削工艺可以有效地防止磨削裂纹的产生。
Than the loose organization of the abrasive used is not easy passivation, less heat in the grinding process can reduce the workpiece deformation and heat burns.
较松组织的磨具使用时不易钝化，在磨削过程中发热少，能减少工件的发热变形和烧伤。
Than the loose organization of the abrasive used is not easy passivation, less heat in the grinding process can reduce the workpiece deformation and heat burns.
较松组织的磨具使用时不易钝化，在磨削过程中发热少，能减少工件的发热变形和烧伤。
应用推荐