German hollow-ground hardened steel, high carbon chrome-plated blade.
德国空心地面硬化钢，高碳钢镀铬刀片。
Control CAM for the capping spindles, made of hardened steel, to protect against deformation.
悬盖主轴的控制凸轮使用硬质钢制成以防变形。
The final structure obtained from tempering a fully hardened steel is called tempered martensite.
回火完全淬硬钢得到的最终组织结构被称为回火马氏体。
Guide Shafts: Hardened Steel, (stainless available), large diameters for increased load capability.
指南轴：淬火钢，(不锈钢可用)，增加负载能力大的直径。
The group have also used their machine to punch holes in hardened steel, including stainless steel.
这个小组也将他们的机器用在给淬火钢打洞，包括不锈钢。
And, a new method of determining the technology of tempering of the hardened steel is also advanced.
同时，提出了一种确定淬火钢回火工艺的新方法。
Our products are applicable in alloy steel, stainless steel, hardened steel, non-ferrous metal, etc.
产品适用于合金钢、不锈钢、调质淬火钢、有色金属等。
Progressive metal stamping mould forging weld-repair after quench hardened steel mold materials etc.
焊补冲压模锻造模工具钢等淬火硬化后模具材料的修补。
Quench hardened steel blade of repair, applicable to SKD11 alloy steel, alloy after quenching repair.
淬火硬化模具钢刃口的修补，适用于SKD11合金工具钢，淬火后的模具钢修补。
High accuracy and high efficiency can be achieved on hardened steel for your productivity improvement.
高精度，高效率，才能实现对淬火钢为您提高生产力。
Tempering is possible because of the instability of the martensite, the principal constituent of hardened steel.
由于马氏体这一淬硬钢主要成分的不稳定性，使得回火成为可能。
All net surfaces and datum's are to be made from hardened steel and mounted to a separate base whenever possible.
所有网面和基准要由硬化的钢制造出来同时在可能的情况下安在一个单独的基准上。
Drilling, gun-drilling, turning, milling of hardened steel, white cast iron, non-iron metals, plastics an synthetics.
对硬钢、白铸铁、非铁金属、塑料、合成材料等进行钻孔、深钻孔、车削、铣削等加工的牌号。
Parts made of hardened steel have good performance. It has obvious advantages to substitute cutting for grinding these parts.
淬硬钢制成的零件具有一系列优良性能，用切削代替磨削加工这些零件，具有明显的优点。
TEMPER : Process of re-heating hardened steel to a temperature below critical temperature followed by a desired rate of cooling;
回火：将已经淬硬的钢材再加热到低于临界点以下的某一温度，保温一定时间然后根据要求冷却到一定温度的工艺；
The operation consists of reheating quench-hardened steel to some temperature below the critical range followed by any rate of cooling.
回火作业包括将淬硬钢重新加热到低于临界范围的某一温度然后以任意速率冷却。
The tip of the screw driver has been made of hardened steel which has been ground to provide a long life and a precise carburettor set-up.
尖端的螺丝刀已经取得了淬硬钢已地面提供一个长期的生活和一个确切的化油器的设立。
These properties make this kind of material grades of tool material is used for rough machining of hardened steel and pearlitic gray cast iron.
这些性能使得这种材质等级的刀具材料被用作粗加工淬硬钢和珠光体灰铸铁。
Gear trains are customized to meet torque requirements and may be furnished in plastic, brass, hardened steel, or a combination of these materials.
齿轮组被定做以满足扭矩要求，可以使用塑料，铜，硬质钢或这些材料的合成物。
Made from nickel plated, hardened steel, Super-Lock is a premium locking clip that features specially shaped slots to provide superior performance.
镀镍、淬火钢制成的超级锁扣是一款高级锁夹，突出独特狭形状，提供更高性能。
The revising course, principle and major content of the revised edition of "Metaloscopy of the Induction Hardened Steel Parts" are explained in this paper.
介绍了“钢件感应淬火金相检验”新标准的修订原则、过程和主要内容。
The parts of tool steel and carburization hardened steel through he at treatment has often appeared grinding cracks. It influences the quality of the parts.
经热处理淬火的碳素工具钢和渗碳淬火钢零件，在磨削时常常出现大量较规则排列的裂纹，它直接影响零件的质量。
It features a self-sharpening hardened steel blade, a cast metal handle with tension spring to secure in any position, and a safety guard rail with handle lock.
它具有自我锐化淬火钢叶片的铸造处理与春季的紧张局势，以确保在任何位置，以及一个安全护栏手柄锁。
To reheat hardened steel or hardened cast iron to some temperature below the eutectoid temperature for the purpose of decreasing hardness and increasing toughness.
重新加热硬化钢或硬化铸铁至某一温度，低于共析温度下，使硬度降低，韧度增加。
Surface hardened steel, copper, aluminum alloy sheet, hard alloy steel, zinc layers, chrome layers, tin layers, surface heat treating and chemical treating materials, etc.
表面淬火钢，铜、铝合金薄板，带钢，硬质合金钢，镀锌，镀铬，镀锡，材料表面热处理和化学表面处理的各种金属材料。
It analyses analyzed the colors of hardened steel under the conditions of the high-speed cutting by the thermal oxidation method, and the cutting temperatures are estimated.
根据实验观察，采用热氧化法对高速切削的淬硬钢切屑成色进行分析，以此判断在切削过程中切屑经历过的切削温度。
The author gave us the reasonable selection of tool materials, tool parameters and cutting parameters during turning of hardened steel in order to get the ideal cutting result.
着重说明了车削淬火钢件时，如何通过合理地选用刀具材料、刀具几何参数及切削用量达到理想的切削效果，并提出车削淬火钢件时应注意的若干问题。
Usage Range: Surface hardened steel, copper, aluminum alloy thin sheet, hard alloy steel, zinc layers, chrome layers, tin layers, surface hardened treating and chemical treating materials, etc.
适用范围表面淬火钢，铜、铝合金薄板，带钢，硬质合金钢，镀锌，镀铬，镀锡，材料表面热处理和化学表面处理的各种金属材料。
Usage Range: Surface hardened steel, copper, aluminum alloy thin sheet, hard alloy steel, zinc layers, chrome layers, tin layers, surface hardened treating and chemical treating materials, etc.
适用范围表面淬火钢，铜、铝合金薄板，带钢，硬质合金钢，镀锌，镀铬，镀锡，材料表面热处理和化学表面处理的各种金属材料。
应用推荐