The idea that the analogy exists between heat and mass transfer unit methods is proposed.
提出了传热与传质单元法间存在类似的概念。
In May a few years ago, the "Momentum, Heat and Mass Transfer" exam paper contained the question.
许多年前，在“动量，热量和物质转移”考试中，就有下面这一道题。
Criterion for gas flow pressure loss is presented for rotating liquid film heat and mass transfer device.
提出了旋转液膜气液传热传质设备的气体压力损失的准则关系式。
It is important to obtain the wavy film flow solution for the purpose of heat and mass transfer calculations.
为了计算波动降膜传热传质，求解得到波动膜流解是非常重要的。
An overview about research and development of heat and mass transfer enhancement in AHT absorber was presented.
文章综合介绍了国内外关于升温型吸收式热泵吸收器强化传热传质的研究进展。
One dimensional heat and mass transfer models were established from one piece of waste from each media respectively.
取其中的一片物料作为研究对象，分别建立了一维状态的热量质量传递数学模型。
Presents the core part structure, heat and mass transfer mechanism, and application conditions of the heat exchanger.
介绍了板翅式换热器的芯体结构、传热传质机理、适用条件。
Frosting of finned tube heat exchangers is a complex process of heat and mass transfer under low temperature conditions.
低温工况下翅片管换热器的结霜是一个复杂的热质传递过程。
There is almost no one doing about developing heat and mass transfer model during wood high temperature drying in our country.
特别是我国在建立高温干燥过程中的热质迁移的模型方面，几乎还无人涉及。
In this paper theoretic and experimental researches on the heat and mass transfer on corrugated plate surfaces are carried out.
本文正是通过理论和实验计算两方面来分析波纹板片上的强化吸收传热传质问题。
A heat and mass transfer model was set up, and the simulation results were found to be in accordance with the experimental data.
建立了过程的热质传递模型，比较模拟数据与实验数据，验证了理论模型有较好的适用性。
To obtain the state of heat and mass transfer inside Venturi tube is very helpful to guide design and management of Venturi tube.
获得其内部的传热传质情况对文氏管的设计和运行管理具有非常重要的指导意义。
Fluidized bed drier enjoys advantages of even solid particle mixing and large heat and mass transfer area of gas and solid phase.
流化床操作具有固体颗粒混合好，气固两相传热传质表面积大等优点。
The influence of the working pressure on the heat and mass transfer was analyzed by this model, and the detailed process was investigated.
应用该数学模型分析了压力变化对加填料饱和器传热传质的影响，同时讨论了沿加填料饱和器高度方向的传热传质过程。
A planar model of air and water flow on metal fill surface was set up to investigate heat and mass transfer performance of air conditioner.
建立了填料塔的二维传热传质模型，考虑了因水蒸发或凝结而引起的水的质量变化和空气的质量变化。
Coupled heat and mass transfer in periodic_flow rotary dehumidifier with the mixed additives and desiccant materials has been investigated.
本文研究了具有复合型吸附剂材料的除湿轮中传热传质耦合现象。
The study of heat and mass transfer in capillary-porous medium is extended to the case where liquid and vapor are transferred simultaneously.
本文将作者们在文献中所进行的研究扩展到同时存在液相和汽相转移的场合。
Based on the analysis of heat and mass transfer, a simplified mathematical model describing the falling film crystallization process is developed.
本文在对降膜结晶分离过程进行传热传质分析的基础上，建立了简化数学模型。
In this thesis, the mechanism of heat and mass transfer within a grain kernel in drying or during moisture adsorption has been discussed thoroughly.
本文对谷物干燥和吸湿过程中内部传热传质机理进行了较深入的研究和探讨。
Accurate computation of the heat and mass transfer in the tail water tunnel is the basis of determining the air conditioning and ventilation system.
在设计阶段对尾水洞内的热质交换进行准确计算是确定通风空调方案的依据。
The mass transfer force concept was used to develop a model for the heat and mass transfer from a single superheated bubble rising in the water pool.
该文从传质推动力角度出发建立了高温气泡在水中上升过程的传热传质模型，计算结果与文献报道的实验数据、模拟结果基本吻合。
A mathematic model based on heat and mass transfer in porous media was established for the simulation of paper drying in dryer section of paper machine.
根据多孔介质干燥过程中的传热传质理论，结合纸机工作特点，建立了纸页的干燥过程物理模型和数学模型。
Then a stable heat and mass transfer mathematical model was developed and numerical simulation was conducted by using calcium chloride as the desiccant.
然后建立了其稳态传热传质过程的简化数学模型，对采用氯化钙溶液的再生过程进行了实例计算。
The thesis adopted the high efficiency wave tray to reconstruct the tradition tray of urea synthesis column, which has strengthened heat and mass transfer.
本文采用高效的波形塔板对传统的尿素合成塔进行改造，加强了尿素合成塔内的传热与传质。
Vacuum cooling is a complicated heat and mass transfer process supported by various theories such as diffusion, heat transfer, mass transfer and phase change.
真空冷却过程是复杂的相变传热传质过程，该过程涉及到扩散、传热、传质和相变等机理。
On the bases of Non-Fourier and Non-Fick effects, coupled equations of high intense and rapid heat and mass transfer are founded and made numerical simulation.
在考虑非傅立叶效应和非斐克效应的基础上，对所建立的高强度快速传热传质的耦合方程进行了对流边界条件的数值模拟。
Bio-heat transfer science, which mainly studies the heat and mass transfer law, is an interdisciplinary science of biology, thermophysics and clinical medicine.
生物传热学主要是研究生物体的传热传质规律，是生物学、热物理学与临床医学的交叉。
Based on the cold experimentation on rotating-film tube that principal deaerating component of this deaerator, heat and mass transfer characteristics was analyzed.
对其主要除氧元件起膜管进行了冷态试验研究，根据试验情况分析了其传热传质特点。
The model and results are helpful to reveal heat and mass transfer characters of the adsorbent bed and to provide theoretical basis for optimal design of this system.
该数学模型和计算结果有助于深入认识吸附床的传热传质特性，以期能为吸附床的具体设计提供理论依据。
The model and results are helpful to reveal heat and mass transfer characters of the adsorbent bed and to provide theoretical basis for optimal design of this system.
该数学模型和计算结果有助于深入认识吸附床的传热传质特性，以期能为吸附床的具体设计提供理论依据。
应用推荐