Sharpness oriented for aluminum machining. Good chip evacuation by 45 degrees helix angle.
重视铝合金加工的切削锋利度。45度的螺旋角实现了良好的切屑排出性能。
Besides, the relationship between the tooth shape and the helix Angle, and the number of teeth are studied.
分析了端面齿廓形状与螺旋角及齿数的关系。
In the design of crossed-helical gears, the minimum sliding velocity is obtained when the helix Angle are equal.
在横渡螺线齿轮设计,当节面角是相等的时,极小值滑的速度得到。
The helix angle is the same on each gear , but one gear must have a right-hand helix and the other a left-hand helix.
螺旋角度是相同的在每个之上齿轮,但是一齿轮一定有一个用右手的螺旋和另一个一个左侧的螺旋。
Often described as a slender body of a white horse, the amount before a helix Angle (which is also a characteristic of the Licorne).
通常被形容为体型修长的白马,额前有一螺旋角(这也是独角兽的特征)。
The arithmetic for bbending be of DIGLST is Presented after the coefficients of helix angle and contact lines are analyzed by 3-D FEM.
分析双渐开线齿轮的螺旋角系数和接触线系数,提出了新型齿轮弯曲应力的计算公式。
Then, it is indicated that the gearing used presently, while its helix Angle and ratio are both big enough, is in danger of interference.
对于相啮齿轮端面齿廓相互关系的分析表明,目前使用的几种基准齿形,当螺旋角传动比都比较大时,存在齿形干涉的危险。
By using the profile modeling machining equipment of helix Angle, a new method about grinding rake face of gear cutter hob on tool grinder is presented.
提出一种用螺旋角仿形加工装置在工具磨床上刃磨齿轮滚刀前刀面的方法。
According to the volume oil formula of the straight gear pump, the volume oil formula of the helical gear pump is got and the helix Angle no trapping is found.
利用直齿齿轮泵的困油容积变化公式,求出了斜齿齿轮泵的困油容积变化公式,得到了斜齿齿轮泵不发生困油的螺旋角。
If helix Angle is equal to or slightly smaller than the Angle which makes two meshing boundary lines coincide with each other, preferable meshing performance is obtained.
采用使两条啮合界限线重合的螺旋角度,或略小于此值,均可获得较好的啮合质量。
The way of calculating the parameters of modulus, pressure angle and helix angle of the gear masters that are used to calibrate gear instruments is in detail in this paper.
本文详细介绍了用于齿轮仪器校准的齿轮样板模数、压力角、螺旋角等参数计算方法。
This paper presents the information of the effect, measured with a tele-strain-meter, of work material, feed, cutting speed, depth of cut, number of teeth and helix Angle etc.
本文在高速滚齿机上,利用遥测应变仪,测定了工件材料,进给量,切削深度,切削速度,齿轮齿数及螺旋角等对力矩的影响,并得出径节为8时的力矩公式。
Within the range of machining, if the helix Angle adopts a bigger value, it may improve the meshing performance and develop the advantages of double enveloping TI worm gearing.
在加工允许的范围内,螺旋角取较大的数值,能够较好地改善啮合性能,从而发挥二次包络TI蜗杆传动的优势。
There is no common normal in the conical involute gear and the fixed chordal tooth thickness can not be measured accurately because of the coexistence of helix angle and taper.
渐开线锥形齿轮由于同时存在锥度和螺旋角,使得其固定弦齿厚无法精确测量,也没有公法线。
This paper presents a method for machining of taper cutting tools with equal helix Angle. The principle of the method is using taper helical curve with equal pitch to approach equal Angle one.
文章提出了一种在经济型数控机床上实现等螺旋角圆锥螺旋线的加工方法,其原理是用等导程螺旋线去逼近此种曲线。
There are many helixes of dihedral Angle, and the whole skeleton forms a large helix in the structure of the rotatory isomer.
其结构中包含许多二面角螺旋,而且具有旋光性的异构体,其结构的整体骨架也构成一个大的螺旋。
Instead, and as their name implies, the teeth on a helical gear are inclined at an Angle so that each tooth wraps on the gear's cylinder in the shape of a shallow helix.
反之,并作为其称号所暗示地,牙齿上地螺旋齿轮倾向于一个角度,使每一个齿完毕对齿轮地圆筒外形地浅螺旋。
The conception of deformation angle of helix pre-former is introduced and process parameters are analyzed with math regression method.
以T形焊接接头为算例,结合热弹塑性有限元法和映射应变分量法,研究了角焊缝角变形的产生机制。
The conception of deformation angle of helix pre-former is introduced and process parameters are analyzed with math regression method.
以T形焊接接头为算例,结合热弹塑性有限元法和映射应变分量法,研究了角焊缝角变形的产生机制。
应用推荐