Accurate evaluation on physicochemical property of high molecular weigh polymer is favorable for further optimization of different polymers and for guidance of injection parameters.
对超高分子聚合物理化性能的准确评价有利于对不同聚合物进一步优选并指导其注入参数的优化。
While the studies reported were still incomplete, it seemed to the conferees to be desirable, to minimize reactions, to avoid highly branched dextrans and preparations of high molecular weight.
尽管报道的研究不是很完善，但是对参加会议的人来说，减少不良反应，避免高度支葡聚糖和高分子配制剂看起来是可取的。
The observations suggested that the reactions which occurred must be explained by factors other than high molecular weights or aggregates of molecules.
这些观察结果显示发生的不良反应必须用凝血因子解释，而不是用高分子重量和多个高分子的聚集。
In the process of laboratory testing, evaluation of filtering factor of ultra high molecular weight polymer has certain limitation according to test of filtering factor of molecular weight polymer.
生产应用表明，在室内检测过程中，按照中分子聚合物过滤因子的测定方法来评价超高分子聚合物过滤因子表现出了一定局限性。
Polyacrylate sodium with high molecular weight is widely used as one kind of important anionic flocculation in industry.
高分子量聚丙烯酸钠是一种重要的阴离子型絮凝剂，在工业上有着广泛的应用。
A polymer is a substance of high molecular weight, well above the size of the compounds considered so far.
聚合物是一种高分子的物质，其大小远远超出迄今所提到的各种化合物。
Any type of solid or semi solid organic material of natural or synthetic origin, generally of high molecular weight with no defined melting point. Most resins are polymers.
一类固体或半固体的天然的或合成的有机材料，一般为无清晰熔点的高分子量材料，多数树脂为聚合物。
It exists in a high molecular weight form, approximately 180,000 daltons, and as such seems to be associated with a lipoprotein.
它以高分子量形式存在，大约接近180,000道尔顿，这样的表现似乎与脂蛋白有关。
Test criteria formulated for filtering factor of ultra high molecular weight polymer has been widely applied in testing departments of oilfield.
依据改进的检测方法编制的超高分子聚合物过滤因子检测标准已在油田各测试机构广泛使用。
Kerogens have a high molecular weight relative to bitumen, or soluble organic matter.
相对于沥青质或可溶性有机物而言，干酪根的分子量高。
It improved the soil granular structure in a short time, since high molecular compounds naturally degraded into organic matters.
同时，高分子经过自然降解转化为有机物质，可在较短时间内改善土壤结构。
Because the carbonyl compounds in oxidized fats are of relatively high molecular weight, they can be separated by a variety of techniques from lower molecular weight volatile carbonyl compounds.
因为在氧化的脂肪中的羰基化合物分子量都比较高，它们可通过多种技术从低分子量挥发性羰基化合物中分离出来。
For example, ultra high molecular weight polyethylene (UHMWPE) is 15 times stronger than steel and offers level 5 cut protection.
比如，超高分子量聚乙烯(UHMWPE)强度是钢的15倍，提供了5级防割。
A small amount of high molecular weight HDPE was added into relative low molecular weight HDPE under compound stress field to extrude pipe.
将少量相对高分子量的高密度聚乙烯(HDPE)加入到相对低分子量的通用级HDPE中，在复合应力场作用下挤出制成管材。
With sludge of different species and 28 organic high molecular coagulants, a flocculant dewatering experiment was done.
选择不同种类的污泥，采用28种有机高分子絮凝剂进行絮凝脱水实验。
High molecular weight linear products were regenerated after the ring-opening polymerization of the cyclo-products using potassium phenoxide as initiator.
环状产物又在阴离子引发剂联苯双酚钾的作用下进行开环聚合重新得到高分子量的线性产物。
As one kind of high molecular weight suffocate hydroxybenzene antioxidant, antioxidant 1010 is widely used in plastic, rubber, synthetic fiber, elastomer, petroleum products and fodder fields.
抗氧剂1010是一种高分子量的受阻酚类抗氧剂，广泛应用于塑料、橡胶、合成纤维、弹性体、石油制品以及饲料领域中。
In the second stage, to ensure a high molecular weight polymer, enough reaction time is necessary.
在第二阶段，为了确保得到高分子量聚合物，需要足够的反应时间。
All proteins are high molecular weight heteropolymers of amino acids joined by peptide bonds, ranging from 104 to over 106.
所有的蛋白质都是由肽链连接的氨基酸构成的高分子杂聚物，分子量大约为104到大于106之间。
This paper introduces the synthesis of the high molecular weight polyether by using metalloporphyrin complex catalyst system.
介绍了用四苯基卟啉铝络合物催化体系合成高分子量聚醚的方法。
High molecular polyaniline and its derivatives have good electroactivity.
高分子聚苯胺及其衍生物具有良好的电活性。
And a high molecular weight poly (arylene ether nitrile sulfone) has obtained.
获得了高分子量的聚芳醚腈砜。
The synthesis of high molecular weight polyether polyol as well as the applications of such polyol are introduced in the paper.
介绍了高分子量低不饱和度聚醚的制备方法及其在聚氨酯泡沫、弹性体中的应用。
This paper reviewed the research development of physical modification of ultra high molecular weight polyethylene(UHMWPE)and introduced its molding process.
综述了超高分子量聚乙烯（UHMWPE）的物理改性研究进展并对其加工成型工艺进行了介绍。
Synthesis of water - soluble high molecular weight polyacrylamide by homopolymerization and copolymerization was introduced.
综述了均聚法和共聚法合成水溶性高分子量聚丙烯酰胺的工艺。
The main factors of ultra high molecular weight polyethylene (UHMWPE) artificial hip joint invalidation were analyzed.
分析了超高分子量聚乙烯(UHMWPE)基人工髋关节假体松动失效的主要因素。
The main factors of ultra high molecular weight polyethylene (UHMWPE) artificial hip joint invalidation were analyzed.
分析了超高分子量聚乙烯(UHMWPE)基人工髋关节假体松动失效的主要因素。
应用推荐