Tell us your problems in the field of high temperature sintering, We will help you to solve them!
请告诉我们您关于高温烧结方面的疑问，我们帮助您解决问题！
The preparing method orderly comprises the steps of cold pressing molding and high temperature sintering.
制备方法为先冷压成形再进行高温烧结。
The post-processing of indirect SLS includes debinding, pre-sintering, high temperature sintering and metal infiltration.
间接法选择性激光烧结技术制备金属件的后处理工艺包括脱脂、预烧结、高温烧结以及渗金属。
A new technology for preparation of Ti-Fe alloy coating on the steel substrate was investigated by high temperature sintering method.
进行了高温烧结法在钢基体的表面上制备钛铁合金涂层的新工艺研究。
Formation and influential factors of high temperature sintering in titanium sponge production by magnesium reduction method were analyzed.
论述了镁法海绵钛生产过程中高温烧结的形成及其影响因素，分析了减少高温烧结的控制措施。
The article regards that the optimum way to prevent penetrating of slag and corroding of lining is using high temperature sintering or composite lining.
本文认为炉衬采用高温烧结或复合炉衬是控制熔渣浸入侵蚀的最佳途径。
In high temperature sintering , on the one hand, big across hole is formed by gas closed in porosity that passes through molten glass phase, and mechanical properties is declined.
高温烧结时，一方面，熔化的玻璃相被封闭气孔中的气体穿过形成贯穿大孔洞，削弱高温烧结时的力学性能；
However, the traditional preparation technology needs the high temperature sintering normally, this kind of film needs high temperature resistant base, which has restricted its scope of application.
然而传统的制备工艺一般需要高温烧结，制备这类材料需要耐高温的基底，这就限制了其使用范围。
The effect of high silicon low iron material on softening temperature, balling index, quality and output of sintering ore was investigated.
分析了高硅低铁物料对铅锌矿软化温度、成球性指数、烧结矿质量与产量的影响。
High sintering temperature and long maintaining time lead to the sufficient crystallization and the full densification, but result in the worsening of the deviation from the stoichiometry.
高的烧结温度和长的保温时间使结晶更加充分，样品致密度更好，但是也造成偏离化学计量比的加剧。
The pusher kiln is widely used to heat the electronic material with high temperature as a sintering device.
推板窑作为热工烧结设备，广泛应用于电子材料高温处理。
The wax models with high accuracy were sintered by filtering powder bed temperature of sintering process.
通过对烧结过程中粉床温度的筛选，烧结出尺寸精度较高的蜡模。
There are many techniques for fabricating ceramic films such as PVD, CVD, high-temperature sintering and sol-gel method.
陶瓷薄膜的制备技术多种多样，如物理气相沉积、化学气相沉积、高温烧结和“溶胶-凝胶”法等。
The cement has advantages of low sintering temperature, fast coagulation time, high initial and later strength and good corrosion resistance.
该水泥烧成温度低、凝结时间快、早期和后期强度都高、耐侵蚀性能好。
The coating with high bond strength was synthesized by means of treatment of the gradient liquid phase sintering or medium temperature reactive sintering.
通过梯度液相烧结或中温反应烧结处理，热喷涂层具有很高的结合强度。
It features the low sintering temperature resulting in low power consumption, medium dielectric constant, high quality factor and temperature stable resonant frequency.
其具有降低烧成温度节能、中等介电常数、高品质因数、稳定的谐振频率温度特性。
At present, its preparing technologies mainly contain powder sintering technology, melt infiltration technology, Aluminum alloy directly oxidizes at high temperature technology.
目前它的制备工艺主要有粉末烧结工艺、熔体浸渗工艺、铝合金高温直接氧化工艺。
Diffuser disc is produced from aluminum oxide and ceramic bonded together with high sintering temperature.
曝气盘采用氧化铝磨料和陶瓷结合剂高温烧结而成。
The paper studies the influence of temperature system on the microstructure and behaviors of high-performance quartz sand sintering brick by XRD and SEM analyses.
利用石英砂制备高性能石英砂烧结砖，通过对原料和砖体物相分析、砖体的显微结构分析以及砖体的物理性能分析，研究温度制度对砖体性能的影响。
The paper studies the influence of temperature system on the microstructue and behaviors of high-performance quartz sand sintering brick by XRD and SEM analyses.
利用石英砂制备高性能石英砂烧结砖，通过对原料和砖体物相分析、砖体的显微结构分析以及砖体的物理性能分析，研究温度制度对砖体性能的影响。
The sintering behavior of white carbon powders by spray pelletization is investigated by DSC and high temperature dynamic XRD.
采用差式扫描热分析和高温动态X射线衍射对喷雾造粒白炭黑微球的烧结行为进行了研究。
As substitution of diopside for talc, the body has lower firing temperature and widening sintering range. The property of diopside porcelain is in keeping with standard of high frequence dielectric.
用透辉石代替滑石时，透辉石瓷有较低的烧成温度和较宽的烧结范围，其性能符合高频电介质标准的要求。
The developed porcelain material used for isostatic pressing has low sintering temperature and high mechanical, electrical and thermal performances;
研制出的等静压电瓷材料具有较低的烧成温度和良好的机、电、热性能；
Sample of porous SiC polycrystals are prepared by solid sintering process under high temperature and normal pressure using moulding SiC powder.
碳化硅粉末经压制成型后，在高温常压下固相烧结制成多孔碳化硅样品。
Through sintering at high temperature, better properties of the castable was obtained.
在不同高温烧成后，有机结合剂的浇注料性能得到提高。
Finally the new developments of high-temperature sintering and rapid-cooling integrated in one continuous process could realize sinter-hardening of MIM-parts.
最后把高温烧结和快速冷却组成一个连续过程，能实现MIM零件烧成品的硬化。
The formulation of the nano composite material comprises the step of: sintering a micron substrate, a nano strengthening phase, rare earth, a grain growth inhibitor and the like at high temperature.
本发明的纳米复合材料配方由微米级基体、纳米级增强相、稀土和晶粒生长抑制剂等高温烧结而成。
Microstructure determined by both sintering temperature and high temperature holding time would influence acid corrosion resistance.
研究表明陶瓷烧结温度和保温时间均对陶瓷的显微结构有影响，进而影响陶瓷的耐酸腐蚀性能。
Theproduced sintering brick has temperature preservation and heat insulation, shock and compression resistance, no distortion and high yield, is suitable to industrial large-scale production.
获得的烧结砖保温隔热，抗震抗压，无哑声，成品率高，适合工业大生产。
Theproduced sintering brick has temperature preservation and heat insulation, shock and compression resistance, no distortion and high yield, is suitable to industrial large-scale production.
获得的烧结砖保温隔热，抗震抗压，无哑声，成品率高，适合工业大生产。
应用推荐