Firstly, the advantages of low speed high torque motor were introduced.
阐述了低速大力矩直接驱动电动机的技术优势。
A high pressurized design method of slipper pairs of a new type camshaft connecting-rod low speed high torque motor was put forward.
介绍了一种采用静压支承的曲轴连杆式低速大转矩液压马达滑靴副的高压化设计方法。
This dissertation presents a type of low speed and high torque motor-semiconductor converting low speed reluctance motor (SCLRM) with novel structure and principle for the first time.
本文首次提出了一种新型结构原理的低速大力矩电动机-半导体换流低速磁阻电动机(SCLRM)。
Direct control of torque over the motor speed range is provided by the drive, which helps the motor and drive generate torque levels high enough to cycle the press back to ready position.
直接控制扭矩而不是电机转速范围，可以使得电机和变频器产生足够高的扭矩使得压机可以回复到原来的位置。
The Paice patent covers a way to supply torque to a car’s wheels from both an electric motor and internal combustion engine using a combination of high voltage and low current.
帕斯专利包括通过高电压和低电流从电动马达和内燃引擎向汽车车轮提供力转矩的方法。
Maintenance-free brushless drive motor with frequency inversion, has high start torque and short acceleration time.
免维护高力矩无刷变频电机直接驱动，启动力矩大、加速时间短。
"New" motors - with independent intellectual property rights of core technology, strong high quality motor, torque is strong.
“新型”电机——拥有自主知识产权的核心技术，强劲的高品质电机，扭矩强大。
The motor is characterized by reliability, small step-angle, high holding torque, strong ability of driving high rotor inertia load and super structural manufacturability.
其突出的优点是步距角小、驱动惯性负载能力强、自定位力矩大、可靠性高、结构工艺性好。
PM motors, conversely, derive the field from high energy permanent magnets, so that no power is required to build the motor field and more power can be devoted to torque generation.
下午电机，反之，从外地获得高能永磁材料，这样就没有权力要求，以建立电机领域和更大的权力可用于扭矩一代。
A new kind of aluminium alloy with satisfactory resistivity and good casting properties and good mechanical properties for motor rotors with high torque and high slip is found.
为高转矩、高转差率的电机转子找到了一种既满足电阻率要求，又具有好的铸造性能和好的力学性能的铝合金配方。
By applying different pre-pressure, the speed, torque and temperature of the ultrasonic motor in low and high vacuum have been tested and compared with the normal condition.
施加不同的预压力在低、高真空环境下对超声电机的转速、转矩及温升进行测量并与常态下相比较。
Three-phase motor relies on three-phase supply. It has a high efficiency and can get a high starting torque.
三相电动机以三相电源驱动感应电动机，其效率很高，启动力矩也比较大。
Thus, the ac input motor and driver system has superior torque characteristics over a wide speed range, from low to high speeds, offering a large speed ratio.
因此，AC输入电机和驱动系统具有在很宽的转速范围内扭矩特性优越，从低到高的速度，提供了大速比。
With soil stabilizer as an example, heat dissipation mode of low speed, high torque hydraulic motor of rotator's hydraulic system is analyzed in the article.
文章以稳定土拌和机为例，对转于液压系统低速大扭矩液压马达的散热方式进行了分析。
The stripping system adopts stepping motor driving, and the instant starting can produce effect of high torque.
剥皮系统采用步进电机驱动，瞬间启动能产生高扭矩效果。
Appropriate pitch curve designing is a key of regularly working for non-circular planetary gear mechanism with variable center distance which can be used in low speed high torque hydraulic motor.
合理的节曲线设计是可用于低速大扭矩液压马达的变中心距非圆行星齿轮机构正常工作的关键。
This paper gives the design of a new type, high torque VR step motor-dual stator VR step motor which can be used to drive robots directly.
本文给出一种新型，高转矩VR步进电动机——双定子VR步进电动机的设计。该电机可用于机器人的直接驱动。
Another kind requests the motor output low torque, maintains the high speed.
另一种是要求马达输出小转矩，保持高转速。
As a high performance ac asynchronous motor drive system, accurate torque and position control is necessary for high-speed motorized spindle.
作为一种高性能异步电动机传动，精确的转矩转速和位置控制对于高速电主轴来说是必需的。
The disk type PM synchronous motor has high power density and excellent dynamic performance at the same output power or shaft torque.
盘式永磁电机功率密度高，动态性能良好，是理想的机电一体化组件。
High torque to weight ratio, high efficiency and wide speed range should be the qualities possessed of by the motor drive systems in Electric Vehicles.
电动汽车中的电机驱动系统应该具有高转矩重量比、高效率以及宽广调速范围等特点。
The breakdown of transmission shaft in the main drive system is due to too high roll torque. Overpower protection mode of motor current does not reflect the true dynamic character of roll torque.
轧制力矩过大是轧机主传动系统传动轴断裂的主要原因，传统的电机电流过载保护方式不能真实反映轧机主传动系统扭矩的动力学特性。
Serious commutation lag occurs when a Brushless DC Motor (BLDCM) operates at high speeds, and this leads to torque decline with ripple.
高速条件下，无刷直流电动机的电流换向产生严重滞后，导致转矩下降并伴随脉动。
Direct Torque Control (DTC) of induction motor based on DSP is new technology of high performance AC — frequency conversion — rate of regulation.
基于DSP的电动汽车用交流电机的直接转矩控制是电机高性能交流变频调速的新技术之一。
Influences of earn surface curves of an air motor with low-speed and high-torque output characteristics on the performance of the multilobed internal curve, radial pluggerare analysed.
依据多作用内曲线径向柱塞式低速大扭矩气马达的工作原理，分析了其定子内表面曲线对气马达性能的影响；
It is a rapid response motor at all operating speeds because of its high torque-to-inertia ratio and low self-inductance.
它是在由于其高扭矩到惯性比和低的自感所有运行速度快速响应马达。
Therefore, research and development of high-performance direct torque control system of electrically excited synchronous motor is of great economic value.
因此研究和开发高性能的电励磁同步电动机直接转矩控制系统具有重大的经济价值。
Under the actual operation lim its of motor voltage and current , a high-efficiency optimum torque control met hod for poly-phase PMSM is proposed.
在电动机实际工作的电压和电流约束条件下，提出了多相永磁电动机的一种最佳转矩控制方法，该方法能够使电动机在给定的控制电流下获得最大的输出转矩。
Under the actual operation lim its of motor voltage and current , a high-efficiency optimum torque control met hod for poly-phase PMSM is proposed.
在电动机实际工作的电压和电流约束条件下，提出了多相永磁电动机的一种最佳转矩控制方法，该方法能够使电动机在给定的控制电流下获得最大的输出转矩。
应用推荐