UV Stabilized Acetal Homopolymer, Black, Medium Viscosity.
紫外被稳定的缩醛均聚物，黑色，中等黏度。
Propanoic acid, ethenyl ester, homopolymer; poly(vinyl propionate);
丙酸乙烯基酯单的均聚物；
With the increasing amount of homopolymer, the PEO domain size increases.
随着均聚物含量的增加，PEO分散相尺寸逐渐增大；
The homopolymer and the copolymer of acrylic acid and acrylamide is very useful and important.
丙烯酸、丙烯酰胺的均聚物和共聚物用途广泛，是一类非常重要的高分子化合物。
Furthermore, the phase domain structures are different at different concentrations of homopolymer a and B.
此外，如果均聚物a和B的浓度不同，其相区的结构也不同。
The process of thermal-decomposition of indole homopolymer is studied, and the superior conditions are obtained.
研究了酸聚物的热分解过程，得到了酸聚物热分解的适宜条件。
The distribution of star homopolymer within the microphases was investigated based on enthalpic and entropic effects.
并结合体系的熵和相互作用能的变化， 讨论了星型均聚物在体系微相结构中的分布。
The fluoro-acrylate was homopolymer-ized and copolymerized in emulsion at present of a composite emulsifying agent, respectively.
含氟丙烯酸酯在复合乳化剂存在下分别进行均聚乳液聚合和共聚乳液聚合。
PHB copolymers are preferred for general purposes as the degradation rate of PHB homopolymer is high at its normal melt processing temperature.
基丁酸酯共聚物是作为均聚物PHB的降解率一般用途的首选是在其正常高熔体加工温度。
The simplest polymer which can be envisaged consists of the repetition of a single structural unit many times over to form a liner homopolymer.
可以想象，最简单的聚合物是由一种结构物单元重复多次形成一个 线型 均聚物。
Its unique crystalline structure results in increased strength, stiffness, heat distortion temperature and performance under load as a homopolymer.
其独特的，增加了强度，刚度晶体结构的结果，热变形温度和负荷下表现为均聚物。
Blending modified PP for accumulator was developed by extrusion blending, with PP homopolymer as basic material, PP copolymer, HDPE and SBS as modifiers.
以均聚pp为主要原料，共聚pp、HDPE、SBS为改性剂，用挤出共混法研制蓄电池用共混改性PP塑料。
The experimental results show that the changes of melt peaks of copolyesters with changing of S. S. P. temperature and time are different from PET homopolymer.
研究发现，共聚酯的熔融峰随着固相聚合温度和时间的变化而与纯PET有明显的差别；
Through the study on every step structure of corn starch graft polyacrylate copolymer, the methods of removing homopolymer and corn starch side chain are discussed.
研究玉米淀粉接枝聚丙烯酸酯共聚物的各级结构，主要探讨去除均聚物和玉米淀粉侧链的方法。
Compared with homopolymer GAP, THF copolymer GAP has more excellent mechanical performances and less sensitivity, and possesses the same degree of thermal stability.
THF共聚型GAP常温和低温力学性能明显优于均聚gap，感度比均聚gap低，热稳定性和均聚gap相当。
The production technique of polyoxymethylene can be divided into homopolymer technique and copolymer technique. In this project, copolymer technique will be applied.
聚甲醛生产工艺有均聚甲醛和共聚甲醛两种，本项目拟采用共聚甲醛工艺技术。
The PHB homopolymer is a stiff and rather brittle polymer of high crystallinity, whose mechanical properties are not unlike those of polystyrene, though it is less brittle.
在PHB的均聚物是一种高结晶度，其不同于那些不聚苯乙烯力学性能，比较脆硬聚合物，虽然它是那么脆弱。
Five-selection simple cubic lattice, self-avoiding walk, and nearest interaction model were used to construct the homopolymer adsorption model on the solid-liquid interface.
模拟中采用五选择简单立方格子上的自回避行走和最近邻相互作用模型；
When the mass fraction of the homopolymer in blends reaches 33.3%, the "core-shell" structure, similar to the micelles, can be clearly observed in the polystyrene (PS) matrix.
当均聚物质量分数增大到33.3%时，在聚苯乙烯（PS）连续相中形成了类似胶束的“核-壳”结构。
The Conditions for formation of IPN from castor oil polyurethane and homopolymer or copolymer of styrene, methylmethacrylate and acrylonitrile at room temperature were Studied.
本工作研究了由蓖麻油型聚氨酯及苯乙烯、甲基丙烯酸甲酯、丙烯腈的均聚物或共聚物组成的互穿网络物在室温条件下的合成规律。
The test and study results indicate that DR of copolymer is better than homopolymer with same molecular weight and DR of homopolymer with same molecular weight decreases as len…
分析结果表明，共聚物的减阻效果比相同分子量的均聚物要好，而相同分子量均聚物的减阻率随侧链长度的增加而降低。
Diaceton acrylamide is mainly used as homopolymer and is a good modifier as well, it has a broad range of USES such as in coatings, cohesive agents, hair spray, light-sensitive materials.
双丙酮丙烯酰胺主要作为均聚物使用，同时它又是一个很好的改性剂，因此具有广泛的使用范围，可以用在涂料、粘接剂、发胶、感光材料等许多方面。
This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.
本文比较了几种甘油单硬脂酸（GMS）产品在均聚无规与耐冲击共聚PP的注塑应用中作为抗静电剂和脱模剂的效果。
A nonwoven web formed of substantially continuous spunmelt fibers is formed from a homopolymer of polypropylene having a skewed molecular weight distribution and a polydispersity of less than 3.5.
由基本上连续的熔纺纤维形成的无纺网幅是从具有偏斜分子量分 布和低于3.5的多分散性的聚丙烯均聚物形成的。
A nonwoven web formed of substantially continuous spunmelt fibers is formed from a homopolymer of polypropylene having a skewed molecular weight distribution and a polydispersity of less than 3.5.
由基本上连续的熔纺纤维形成的无纺网幅是从具有偏斜分子量分 布和低于3.5的多分散性的聚丙烯均聚物形成的。
应用推荐