A digital electro-hydraulic servo system based on 1553b bus was introduced.
介绍了一种基于15 5 3b总线的数字式电液伺服系统。
The model of the hydraulic servo system is created, simplified and dispersed.
建立了液压伺服控制系统的数学模型，并进行了简化和离散化；
This paper describes problems about the match of power mechanism in hydraulic servo system.
本文论述了液压伺服系统动力机构匹配问题。
This paper presents a simple gain-variable PI controller used for hydraulic servo system control.
本文提出了一种简单的变增益PI控制器，并应用于液压伺服位置系统的控制。
The application of electro-hydraulic servo system to the tilting car body structure is discussed.
就电液伺服系统在可倾车体结构中的应用进行了讨论。
The paper introduces the principle and fault of the mechanical - hydraulic servo system on locating the valve.
本文介绍了阀门定位用机液伺服系统的工作原理及常见故障。
In recent years, electro-hydraulic servo system has been applied to aviation and metallurgy fields etc. widely.
近年来，电液伺服系统已经被广泛地应用于航空、冶金等重要领域。
A method of the electro hydraulic servo system identification modeling is presented based on support vector machines.
提出了电液伺服系统的支持向量机的辨识建模方法。
So it is very important that studying the real-time control and advanced control method of Electro-hydraulic Servo System.
因而对电液伺服系统的实时控制和先进控制方法的研究具有非常重要的意义。
The principles and structure of a computer control system for steckel mills with a hydraulic servo system are introduced .
介绍了炉卷轧机液压压下计算机控制系统的结构及原理；
However, with the increasing of control quality request, the status of electro-hydraulic servo system PID control fluctuates.
然而，随着人们对控制品质要求的不断提高，电液伺服系统中pid控制的地位发生了动摇。
This paper proposes the order and parameter identification of electro-hydraulic servo system by multi-variable time series CAR.
本文提出了用多变量CAR时序模型来辨识电液伺服系统的阶和参数。
This paper presents an application of model reference fuzzy adaptive PID control to the submarine propeller hydraulic servo system.
基于模型参考自适应模糊控制和李亚普诺夫第二方法，提出了一种自适应模糊控制器设计的新方案。
In recent years, electro-hydraulic servo system has widely been applied to aviation, spaceflight, shipping and metallurgy fields etc.
目前，电液伺服系统已被广泛地应用于航空航天、船舶、冶金等重要领域。
Then, the application of PID control, optimal control and pole assignment method in the electro-hydraulic servo system are all developed.
然后，作者研究了PID控制、最优控制和极点配置方法在所设计的电液位置伺服系统中的应用。
Because of the simple structure and small spatial volume, valve controlled asymmetric cylinder is widely applied in hydraulic servo system.
阀控非对称缸由于结构简单、空间体积小，广泛地应用于液压伺服系统中。
A digital controller for hydraulic servo system based on DSP was designed, where the TMS320LF2407A chip was adopted for the main processor.
基于DSP的液压伺服系统，以TMS320 LF 2407 A芯片为主处理器，设计了一种数字控制器。
The actualization method of the direct drive electro-hydraulic servo system was introduced, and the mathematic model of the system was built.
介绍了直驱式电液伺服系统的实现方案，并建立了系统的数学模型。
Though choosing the appropriate hydraulic components, finally the mathematical model of the electro-hydraulic servo system will be established.
通过选择合适的液压元件建立整个电液伺服系统的数学模型。
The electro-hydraulic servo system directly controlled with speed variable pumps is a competitive and environmental beneficial driving principle.
介绍新提出的用变转速液压泵闭环控制的差动缸电液伺服系统。
To build up a test-bed for DDVC electro-hydraulic servo system, taking the experiment in order to verify the correctness of the mathematical model.
搭建了直驱式电液伺服系统的试验台，对系统进行了试验研究，从而验证了数学模型的正确性。
Aiming at the mathematical model of continuous casting mold control system driven by the hydraulic servo system, the predictive controller is designed.
针对液压伺服驱动连铸结晶器控制系统的数学模型，设计了预测控制器。
The purpose of this paper is to apply fault tolerant control theories to the design of electro hydraulic servo system in order to raise its reliability.
本文目的旨在把当今前沿的容错控制理论应用到电液伺服系统设计中去，以提高其可靠性。
At first, the status and development of electro-hydraulic servo system and its control method both home and abroad at present are discussed in the paper.
文中首先论述了目前国内外在电液伺服系统及其控制策略方面的研究状况和进展。
This paper puts forward a new MRACS method using low order model, i. e. the fourth order hydraulic servo system following the first order reference model.
本文把液压伺服系统作四阶系统，跟随一阶参考模型，提出了一种新的高阶对象和低阶模型的MRACS 的方法。
For the establishment of the submarine propulsion electro-hydraulic servo system model, the paper USES two modern control methods to achieve their control.
针对建立的潜器推进电液伺服系统的模型，本文采用了两种现代控制方法实现对其的控制。
Therefore, it is necessary to study the properties and control strategies of single channel hydraulic servo system and dual hydraulic motors driving system.
因此深入研究单通道电液位置伺服系统和双液压马达驱动系统的性能及控制策略对仿真转台的研制具有非常重要的实际意义。
It is demonstrated that direct drive electro-hydraulic servo system can replace the traditional electro-hydraulic servo system in the low frequency response.
结果表明，在频响不高的场合直驱式电液伺服装置完全可替代传统的电液伺服装置。
When used in correction mechanism of mechanical drive, hydraulic servo system manifests a long time of overshoot, large overshoot and poor correction accuracy.
当液压伺服系统用于机械传动的校正机构时，显得调整时间长，超调量大，校正精度不高。
According to the feature of hydraulic servo system, the PDF control strategy is proposed, and simulation test is done based on the setup of control system model.
根据其液压伺服系统特点提出了P DF控制策略，并在建立控制系统模型的基础上进行了仿真试验。
应用推荐