Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.
以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。
The injection mold cavity made as mentioned has the advantages of high emulation, good economic efficiency and high productivity. The mold - making method is worth of spreading.
用这种方法制造注塑模型腔，具有仿真度高、经济效益好、生产效率高的优点，是一种值得推广的制模方法。
Using average shrinkage rates of injection-molded parts to decide the dimension of mold cavity can not satisfy the demand of high precision injection-molded parts.
采用一般的平均收缩率方法来确定模具型腔的成型尺寸，已难以满足精密注塑成型制品的精度要求。
Gas assisted plastics injection molding process includes injection of polymer melt into mold cavity and then injection of gas-compressed into the polymer melt.
气体辅助注塑成型工艺包含塑料熔体注射和气体注射两部分，由气体推致力塑料熔体充满模具型腔。
An injection die with a mold cavity was designed though using the injection mold CAE software MOLDFLOW to simulate plastic flow and choosing the molding parameters of polypropylene.
通过用注塑模CAE软件MOLDFLOW对塑件进行模流分析，选择聚丙烯的成型工艺参数，设计了一模一腔的注射模具。
Firstly, the structure of injection mold is analyzed by use of GT, mold parts are classified to 4 types of ones: cavity or core, mold plate, structure and standard parts.
首先运用成组技术基本原理，对注塑模具结构进行了分析，提出了模具零件按其功用可分为型腔型芯、模板、结构件和标准件等4类零件的分类方法。
The production process of the inflation aided injection molded furniture includes the following steps: 1. injecting molten plastic into mold cavity to form thin wall solidified layer at the mold wall;
气辅注塑家具的加工方法是：①塑料注射，熔 融的塑料注入模具型腔，熔融热塑料遇到温度较低的模壁在周围形成薄 壁凝固层；
Injection mould feed system is an important component of the structure design of injection mould, and is also the only channel for molten plastic flowing into mold cavity.
浇注系统是注塑模具结构设计中的一个重要组成部分，也是塑料熔体进入模具型腔的唯一通道。
The runner system in the injection mold serves to convey the plastic melt coming from the nozzle of the injection molding machine to the cavity.
注射模的浇注系统是指从注塑机喷嘴开始到型腔为止的塑料流动通道，它是模具的一部分，一般分为普通流道浇注系统和无流道浇注系统两大类。
In the design of multi-cavity injection mold, the design of the branch of flow channel and the gate has great influence on the quality of plastics products.
在注塑模设计中，分流道+和浇口的设计对塑料成型的质量影响较大，一直是人机交互式流道+设计的难点。
The cavity dimension calculation of injection mold of plastic small-module precision cylindrical spur gear and its molding technology are introduced.
介绍了精密塑料小模数直齿圆柱齿轮模具型腔尺寸计算方法及成型工艺。
The researches show that the probability method for calculating the cavity dimension of injection mold is more reasonable than the extreme calculation method which is widely adapted n…
研究表明，概率法计算注塑模成型零件工作尺寸比广为采用的极值计算法更为合理。
Abstract: Designed a one-mode two-cavity injection mold through the analysis of the handle of washing machine.
摘要：通过对塑料洗衣机把手工艺的分析，设计了一副一模两腔的注塑模具。
Abstract: Designed a one-mode two-cavity injection mold through the analysis of the handle of washing machine.
摘要：通过对塑料洗衣机把手工艺的分析，设计了一副一模两腔的注塑模具。
应用推荐