And we have, if you will, a low pressure injection system that will also provide water into the core for low pressure. And we have boron that's capable of being inserted as well, as needed.
如果你们可以，一个低压力的加入系统，会给低压力的核心提供水，我们还有硼，它也是可以，被加入的，也是需要的。
The online measurement of the steam quality is a difficult problem of world in petroleum industry, because of high temperature and high pressure of steam and narrow space of steam injection well.
注汽过程中高温高压和狭小的空间，使得干度在线测量成为石油开采行业中的世界性难题。
Pressure transient test in steam injection well is an inexpensive and effective means to determine swept volume and flowing condition of the steam zone.
注蒸汽井压力降落试并是确定蒸汽波及体积和了解波及区流动情况的一种经济、有效的方法。
This injection well perforation parameter prediction theoretical method provides a new way to improve poor formation's water absorbing capability and mitigate over fracture pressure injection.
运用此项研究得出的一套注水井射孔完井参数预测的理论方法，为提高差油层的吸水能力、减轻油层超破压注水提供了新思路。
The water injection well of sandstone reservoir may succeed more than production well if taking acid fracturing treatment because reducing of effect closed pressure on acid etching fracture.
由于降低了酸蚀裂缝的有效闭合压力，砂岩储层注水井酸压比生产井酸压更可能获得成功。
The well S1-1 is a water injection well, which has the characteristic-close pressure between liquid column and formation leakage.
1井是具有钻进时液柱压力与地层漏失压力相接近特点的一口注水井。
Due to high water injection pressure, it is difficult to transport the logging cable into water injection WLL by its own weight during well logging process.
在注水井带压测试工艺中，由于注水压力的影响，测井电缆依靠自身质量无法向井下输送，为此开发研制了测井电缆带压下井输送器。
In the actual application, sequential response value of steam quality is measured under steam injection well with high temperature and high pressure.
在初步的实际应用中，得到了注汽油井井下高温高压蒸汽干度变化的连续响应值。
The injection Wells, pipe network and injection plant in the injection system should be reformed and adjusted and made differential pressure at well head reduce.
建议对注水系统的注水井、管网、注水站均进行改造，综合调整，降低井口压差。
Using pressure distribution analysis to form the pressure distribute figure between produce well and injection well, and then to test the veracity of other parameters like permeability.
采用压力分布分析，将解释结果中的数据绘制成生产井和注水井（生产井）之间的井间压力分布图，检验渗透率等其它参数的准确性。
The pressure in well bottom relation with the time of the injection and the viscosity of cement liquid, and the permeability in the confined aquifer are analyzed.
分析了注浆井底压力和原区压力与注浆时间、浆液粘度、渗透率、计算点与注浆井距离等关系；
The study shows that cyclic steam injection rate, soaking time, flowing bottom hole pressure and blowdown mode are important factors influencing the effectiveness of single well steam stimulation.
分析认为，周期注气量、注气速度、浸泡时间和生产过程中的井底流压及降压方式都是影响单井吞吐效果的重要因素。
Real water injection rate in water injection well will change when system pressure fluctuates or formation water absorption capacity changes.
注水井实际注水量随系统压力波动或地层吸水能力的变化而改变，这是针型阀或井下固定水嘴无法避免的缺陷。
Acid treatment is an important measure to improve production and injection for producer and injector, and pressure transient well test is one of methods for evaluating effects of acid treatment.
酸化是油、气、水井增产增注的重要措施，压力不稳定试井是评价酸化效果的主要手段。
But at present, the technology of boosting pressure for water injection on well groups still has some problems, and it should be improved in the production practice unceasingly.
但目前井组增压注水还存在一些问题，应在生产实践中不断改进技术。
Gass lift drainage gas recovery by gas lift valve, from the ground to high-pressure gas injection stop injection Wells, the gas energy gradually lift shaft in the liquid, the well production capacity.
气举是通过气举阀，从地面将高压气体注入停泵的井中，利用气体的能量举升井筒中液体，使井恢复生产能力。
This zone has the features of poor property, poor communication and low energy, and pressure is not affected by water injection well.
其特点是物性差、连通性差、能量小和压力不受注水井影响。
Gass lift gas lift valve from the ground, the high-pressure gas injection Wells stop the pump, use of gas energy to lift the liquid in the wellbore, the well to restore production capacity.
气举排水采气技术是通过气举阀，从地面将高压天然气注入停喷的井中，利用气体的能量逐级举升井筒中的液体，使井恢复生产能力。
An apparatus for testing the pressure drop of the water injection well is developed according to the actual requirement of oil field production.
针对油田注水生产的需要研制了注水井注水压降测试装置。
Gass lift gas lift valve from the ground, the high-pressure gas injection Wells stop the pump, use of gas energy to lift the liquid in the wellbore, the well to restore production capacity.
气举是通过气举阀，从地面将高压气体注入停泵的井中，利用气体的能量举升井筒中液体，使井恢复生产能力。
Factors affect gas lift options: the yield of the well bottom-hole pressure, fluid production index, lifting height and the gas injection pressure.
影响气举方式选择的因素有：井的产率、井底压力、产液指数、举升高度及注气压力等。
Gass lift drainage gas recovery by gas lift valve, from the ground to high-pressure gas injection stop injection Wells, the gas energy gradually lift shaft in the liquid, the well production capacity.
气举排水采气技术是通过气举阀，从地面将高压天然气注入停喷的井中，利用气体的能量逐级举升井筒中的液体，使井恢复生产能力。
The high-pressure common rail electronically controlled fuel injection system is a kind of the well-performance diesel injection system in general.
高压共轨式电控喷油系统是一种综合性能比较好的柴油机喷油系统。
It can be found through oil field development process that oil well casings are more and more seriously damaged as oil field water injection pressure and stratum pressure are increased.
通过油田的开发历程可以看出，随着油田注水压力、地层压力的提高，套管损坏井越来越多。
It can be found through oil field development process that oil well casings are more and more seriously damaged as oil field water injection pressure and stratum pressure are increased.
通过油田的开发历程可以看出，随着油田注水压力、地层压力的提高，套管损坏井越来越多。
应用推荐