With the analysis on the drying mechanism of sodium based bentonite, a semi-theoretical kinetic model is regressed by using the experimental data of drying the material in suspended state.
本文用膨润土颗粒在悬浮态下干燥的实验测试数据，对该类物料的干燥机理进行了剖析，在此基础上回归了一个半理论半经验的干燥动力学模型。
The stiffness problem of differential equation set has been solved and a kinetic model of simultaneous pyrolysis reaction has been proposed.
解决了微分方程组的刚性问题，提出了混合裂解反应动力学模型。
The fracturing parameter characteristics of binary mixture components were studied with the aid of batch grinding kinetic model.
借助于分批磨碎动力学模型，研究了两组分混合物料组分的碎裂参数特性。
The kinetic model of carbon isotope fractionation may have difference in the different basin, which lies on gas source condition, accumulation history and sedimentary-tectonics history.
碳同位素分馏动力学模型在不同盆地会存在差异，不仅取决于气源条件，还与聚集历史、沉积-构造史有关。
It could be of high value to apply the successfully developed kinetic model of naphtha catalytic reforming broadly into process design and plant production optimization.
开发成功的动力学模型能广泛应用于工业装置的工艺设计和优化生产操作，具有重要的实用价值。
A kinetic model of the pyrolysis of polypropylene is developed and the guidance of this research to the technology of converting polypropylene waste to oil is discussed as well.
考察了冷却剂对分离效果的影响，开发了聚丙烯的热解动力学模型，探讨了此研究对废聚丙烯油化工艺的指导作用。
Based on the precise mechanistic model and molecular reaction kinetic model of cracking reaction kinetics, the platform can support the simulation of cracking process with various feeds.
该平台基于裂解反应动力学的严格机理模型和分子反应动力学模型，支持对多种热裂解原料的裂解过程模拟。
The nitrification inhibition by substrate and it's kinetic model in nitrifying granules were investigated by using a batch respirometry test.
利用序批式呼吸运动计量法研究了硝化颗粒污泥硝化作用的基质抑制及其动力学模型。
The first order aging kinetic model has been put forward successfully based on softening point, which offered an available and convenient method for studying the asphalt aging behavior.
以软化点为参数建立了沥青一级老化动力学模型，为研究沥青抗老化性能提供了一种简便可行的分析方法。
The method and the process to establish lumped kinetic model of tetralin hydrocracking have been discussed according to the mechanism of pseudo first order reaction.
按照加氢裂化拟一级反应机理，论述了建立四氢萘加氢裂化集总动力学模型的方法和步骤。
Based on these results, a kinetic model for diamond nucleation in MPCVD system was proposed. The critical gas pressure corresponding to the highest nucleation density was also discussed.
在此基础上，提出一种MPCVD系统中金刚石成核的动力学模型，并指出对应于最高成核密度有一临界压强存在。
By analyzing the physical characteristics and the operation condition of biomass pyrolysis, the biomass pyrolysis is described using kinetic model and heat and mass transfer model.
通过分析生物质热解的物理特性和运行条件，采用动力学模型和传热、传质模型，对生物质热解进行描述。
The microscopic lattice kinetic model of aging process was build, using the coupling of the theory of microscopic elastic energy and microscopic diffusion equation.
将微观弹性应变能理论和微观扩散方程相耦合，建立起时效过程微观晶格动力学模型。
The degradation kinetic model of head rice yield was developed using Artificial NeuralNetwork (ANN).
用人工神经网络研究了稻谷出米率的退化动力学模型。
Trajectories of motion of particles in cyclone separator are calculated with particle kinetic model, which is followed by the calculation of separation efficiency.
采用单颗粒动力学模型计算旋风分离器内颗粒运动轨迹，并由此可算出粒级效率。
This paper first derives a steady-state kinetic model for rotating biological drum with rotator-fillers in treating wastewater.
本文首先推导出转子填料生物转筒装置处理废水的稳态动力学模式。
Nonisothermal kinetic model of coal pyrolysis has been proposed.
提出不等温的燃煤热解反应动力学模型。
A kinetic model for the dissolution process of medicinal tablets is given.
本文推导出了片剂溶解过程的动力学模型。
Upon the analysis of the experimental data and the reaction mechanism, the kinetic model with inhibition of reactants was presented.
依据实验数据和机理分析，提出了反应组分抑制的动力学模型。
To explore the optimal condition of sepharose activation by means of epichlorohydrin and establish the kinetic model of activation process.
探索环氧氯丙烷法活化琼脂糖凝胶的最佳反应条件，建立活化反应动力学模型。
Through model screening and parameter estimation, a kinetic model of cyclohexane steam reforming reaction is obtained.
通过模型筛选和参数估值，得到了环己烷水蒸汽转化反应动力学模型。
This method is based on the kinetic model of nitrogen and can be used in pressure range 1-100 mTorr.
这种方法基于氮等离子体动力学模型，适用于气压范围1-100毫托。
Research developments of thermodynamic model of wax precipitation, mechanism and kinetic model of wax deposition are presented and some Suggestions on study are also given.
介绍了国内外有关析蜡的热力学模型、蜡沉积机理及蜡沉积的动力学模型的研究进展状况，提出了一些研究建议。
The simulating calculation of composite curing process was carried out by means of cure kinetic model.
利用固化反应动力学模型对复合材料成型工艺的固化工艺进行了模拟计算。
The kinetic model transformation theorem in the change kinematics model is put forward and deduced based on the Lagranges kinetic equation.
本文基于拉格朗日动力学方程推导并提出了变运动学模型下动力学模型变换定理。
And the polymerization kinetic model was obtained based on mechanism analysis.
根据上述机理推导聚合动力学模型。
The catalyst can facilitate the curing without change the kinetic model.
催化剂可以明显促进固化反应，但不改变反应的动力学模型。
The catalyst can facilitate the curing without change the kinetic model.
催化剂可以明显促进固化反应，但不改变反应的动力学模型。
应用推荐