The effect of convection differs with the laser power.
激光功率不同，对流作用不同。
In this paper, an unique CW YAG laser power supply is described.
本文介绍了一种具有特色的连续YAG激光电源。
The laser power absorbed by the shell is treated as equivalent heat flux.
将壳体吸收的激光功率等效为作用于光斑区域内的表面热流。
Its amplifying index decreases with the increasing of the input laser power.
激光放大器的放大指数随输入功率上升而减小。
The changes of peak pressure depending on the laser power density were studied.
讨论了激光功率密度的变化对冲击波峰值的影响。
The green laser power stability influenced by temperature is analyzed in details.
对绿光激光器的温度敏感性做了详细的分析。
Imported optical mirror, reduce wastage of laser power, high quality of light beam.
进口光学激光镜片组，激光功率光损耗低，光束质量好。
This is the most versatile, compact, and affordable laser power meter available today.
这是现今市场上最通用、紧凑和经济的激光功率计。
The design and the performances of a CO2 laser power stabilization loop are described.
本文报导CO_2激光器功率稳定环路的构成与性能。
Maked use of beam combination, laser power will be achieved higher than single output of laser.
利用光束合成可获得比单个激光输出功率更高的激光束。
The practical measuring method of IGBT resonant charging pulse laser power supply is introduced.
介绍了IGBT谐振充电型脉冲激光器电源电路的实用测试方法。
With good beam quality, the stability of output laser power, it is easy to adjust the marking effect.
光束质量好，输出激光稳定性高，打标效果较易调试。
The effects of laser power, frequency, writing speed and procedures on the quality of the chip was evaluated.
研究了激光功率，频率，扫描速度等参数及加工程序对芯片加工质量的影响。
Composite laser slabs are suggested to reduce thermal effects when laser slabs are pumped by high laser power.
为降低高能量光泵浦下板状激光放大介质内的热效应，提出了复合介质的方案。
Then it discusses the relations of catalytic activity with composition of the catalyst, laser power and melting time.
同时还考查了催化剂组成、激光功率及熔炼时间与丙烯歧化反应活性之间的关系。
At the risk of oversimplification we present an argument that predicts the proper dependence of the average laser power.
我们冒着过于简单化的风险而提出一种论点，这种论点能预示出激光功率的适当的内在联系。
Multilevel laser power modulation is a key technology in multilevel optical data storage systems based on photochromism.
多阶激光功率调制是光致变色多阶光数据存储的一项核心技术。
This paper investigates the effects of different overlays and laser power density on the fatigue life of aluminum alloy.
本文研究了不同的约束层和激光脉冲功率密度对铝合金疲劳寿命的影响。
We also measured the dependence of fragmental ratio of each ions on laser intensity and laser power index of total ions.
实验还测得了各产物离子信号分支比对激光强度的依赖性和总离子信号的光强指数。
Choosing appropriate laser power and reducing laser irradiation time in laser drilling can also improve drilling quality.
激光钻削时，选择合适的激光功率及减少激光照射时间可提高钻削质量。
The effects of laser power? speed and defocusing parameter on welding depth and width have been studied in the experiment.
研究了激光焊接输出功率、焊接速度、离焦量等工艺参数对焊接深度及焊接宽度的影响。
Discussing the necessary of laser power control in cutting processing. Giving out a method to realize laser power controlling.
讨论了激光功率控制的必要性，给出了激光功率控制的原理以及一种实现方法。
It was found that increasing laser power or decreasing scan speed leads to higher sintered density and structural homogeneity.
结果表明，适当增加激光功率或减小扫描速率能改善烧结致密度及组织连续性。
The results show that the scheme of the bipolarity address code and the higher laser power can improve the system performance.
比较结果表明，双极性地址码方案可提高系统性能；另外，提高光功率还可改善系统性能。
With increase of heat input and laser power density, the cross section of the weld transformed from nail shape to near X shape.
随焊接热输入和激光功率密度的增大，焊缝截面由钉形向近X形转变。
In this paper, mainly introduced laser power meter basic composition, and design two project for the measurement of laser power.
在本文中，主要是介绍了激光功率计基本组成，并设计出两个方案用于大功率激光的测量。
The system Simplifies hardware circuit by using a MAX5451 digital potentiometer chip, it also digitized the laser power control.
系统采用MAX5451数字电位计不但简化了硬件电路，而且使功率的控制数字化。
This paper analyses the affection of different laser power density distribution to surface temperature rising during laser scanning.
分析了激光扫描时激光功率密度分布状况不同对表面温升的影响。
The process will, says Dr Yabe, become commercially viable when the laser power reaches 400 watts, which could happen later this year.
他表示今年下半年，激光能若达到400瓦时，这个工序将会在商业上可行。
The process will, says Dr Yabe, become commercially viable when the laser power reaches 400 watts, which could happen later this year.
他表示今年下半年，激光能若达到400瓦时，这个工序将会在商业上可行。
应用推荐