The liquid phase sintering process of steel based carbide - iron bimetal composite was researched.
研究了液相烧结钢结硬质合金-铁双层复合材料的生产工艺。
The results indicated that the composites were densified primarily through liquid phase sintering.
结果表明，复合材料主要是通过液相烧结而得到致密化的。
The basic condition of gradient liquid phase sintering, the micro structure and the poperty of coating bonding are discussed.
分析了喷涂层梯度液相烧结的基本条件 ，并观察了其显微组织及其结合性能。
A solder material is formed utilizing a transient liquid phase sintering process, where a precursor material is first formed.
采用瞬间液相烧结工艺来形成焊接材料，其中首先形成前体材料。
Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace.
在真空烧结炉中通过原位反应液相烧结工艺制备出三元硼化物基金属陶瓷覆层。
A ternary boride cermet clad material was fabricated on the Q235 steel substrate by means of the vacuum liquid phase sintering technique.
采用真空液相烧结法，在Q 235钢表面制备三元硼化物基金属陶瓷覆层材料。
Mullite - cordierite composites with various mullite contents and microstructures were prepared by liquid phase sintering and by hot pressing.
由热压和液相烧结方法制得了具有各种莫来石含量和显微结构的莫来石—堇青石复合体。
Steel-bonded cemented carbide powders being compacted by explosive compaction were bonded to the surface of carbon steel using liquid phase sintering.
采用液相烧结技术成功地将爆炸压制后的钢结硬质合金粉末复合在碳素钢的表面。
WC steel-bonded cemented carbide powders being compacted by explosive compaction were bonded to the surface of carbon steel using liquid phase sintering.
采用液相烧结法将爆炸压实后的WC钢结硬质合金粉末复合在碳钢表面，对不同烧结温度下的界面组织和抗剪强度进行了研究。
The coating with high bond strength was synthesized by means of treatment of the gradient liquid phase sintering or medium temperature reactive sintering.
通过梯度液相烧结或中温反应烧结处理，热喷涂层具有很高的结合强度。
Steel-bonded cemented carbide powder processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
采用液相烧结法将爆炸压实后的钢结硬质合金粉末复合在碳钢表面，成功获得覆层材料。
The results show that the liquid phase sintering necessary for coating stability can be realized by gradient designing, the viscous flow of ordinary liquid ph...
结果表明，采用梯度设计可实现涂层稳定成形所需的液相烧结，避免了常规液相烧结时涂层的粘弹性流动。
The possibility of forming connection rods of engines by "warm pressing and liqUid phase sintering on boundary of particles " is explored in theory and experimentally.
通过理论和实践分析，探讨了采用“温压技术和颗粒界面液相烧结技术”生产发动机连杆（典型零件）的可能性。
Steel-bonded cemented carbide powder mixture(TLMW50) processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
采用液相烧结技术成功地将爆炸压制后的钢结硬质合金混合粉末（对应国家牌号TLMW50）复合在碳素钢的表面。
The paper summarizes the effect of additives on the liquid phase sintering behaviour of the compact of austenitic stainless steel powder and the properties of resultant material.
综述了添加元素对奥氏体不锈钢粉末压坯液相烧结行为及材料性能的影响。
The scanning electron microscope analyses proves that the bonding mechanism of this process is liquid phase sintering, the change of surface freedom energy is the motivity for sin…
扫描电镜分析证实，此复合粉末体系的激光烧结是基于液相烧结机制，表面自由能的改变是其烧结的原动力。
The new PM technology has been introduced, such as superfine powder manufacture, rapid solidification processing, mechanical alloying, liquid phase sintering, rapid consolidation etc.
本文叙述了新的PM技术如超细粉制造技术、快速凝固制粉技术、机械合金化技术、液相烧结技术、快速固结技术等。
The scanning electron microscope analyses proves that the bonding mechanism of this process is liquid phase sintering, the change of surface freedom energy is the motivity for sintering.
扫描电镜分析证实，此复合粉末体系的激光烧结是基于液相烧结机制，表面自由能的改变是其烧结的原动力。
And WC grains are grown up based on the grain rotation combination mechanism and local liquid-phase sintering in the early stages of sintering.
烧结早期WC晶粒长大是在晶粒旋转合并机制与局部液相烧结机制共同作用下完成。
The experiment results are explained based on the theory of liquid-phase sintering and the model of Schottkey barriers.
依据液相烧结理论和双肖特基模型对实验结果进行了讨论。
The results of experiment have been explained based on the theory of liquid-phase sintering and the model of Schottkey barriers.
依据液相烧结理论和双肖特基模型对实验结果进行了解释。
The mechanical properties of a tungsten heavy alloy were found mainly dependent on the particles size of raw tungsten powders and liquid-phase sintering temperature.
液相烧结态钨合金的力学性能主要与原始钨粉粒度及烧结温度有关。
The firing of enamel frit is a process of "Liquid-phase Sintering". Its mass transfer is based on the viscous flow of the melt.
搪瓷釉的烧成过程是一种“液相烧结”过程，其传质有赖于熔体的粘性流动。
The results showed that phosphate bioglass binder could form liquid phase to promote the materials sintering and reduce the sintering temperature.
结果表明磷酸盐生物玻璃粘接剂能形成液相而促进材料烧结，降低烧结温度。
The effects of the structure of liquid phase on material-transfer during sintering of ceramic materials have been analysed in the light of theory of molten salt solution.
用熔盐溶液理论分析了液相结构对烧结过程中通过液相的传质过程的影响。
During the laser sintering, due to the large liquid phase viscosity and surface tension, the balling effect occurred when the molten did not wet the solid metal particle and the underlying substrate.
实验发现，在液相粘度较高、表面张力大，熔体材料不浸润固相颗粒和基板等因素的影响下，烧结过程中出现了球化现象。球化的出现妨碍了直接金属激光烧结成形的顺利进行。
During the laser sintering, due to the large liquid phase viscosity and surface tension, the balling effect occurred when the molten did not wet the solid metal particle and the underlying substrate.
实验发现，在液相粘度较高、表面张力大，熔体材料不浸润固相颗粒和基板等因素的影响下，烧结过程中出现了球化现象。球化的出现妨碍了直接金属激光烧结成形的顺利进行。
应用推荐