It USES PLC to process the logic control and USES VVVF to adjust the water pressure.
它采用PLC进行逻辑控制，采用变频器进行压力调节。
This paper presents a distributed logic control strategy for UPS parallel operation.
提出了一种基于平均电流的UPS分散逻辑并联控制方案。
PLC has high price and complex operation. So the relay is always used in simple logic control.
然而由于PLC成本高，操作复杂，对于简单逻辑控制，目前仍然以继电器控制为主。
This paper presents the principle of a predictive fuzzy logic control system and the design method of it.
本文论述了一种预估模糊逻辑控制系统的工作原理和设计方法。
The HL-2A control system consists of timing system, PLC logic control system and feedback control system.
HL 2A控制系统由时序控制系统，逻辑控制系统和反馈控制系统三个部分组成。
The flexibility of FPGA logic control is adopted to achieve the dynamic configuration of the routing node.
将FPGA高度灵活的逻辑控制功能应用于路由结点的配置控制中，通过路由表完成路由结点的动态配置。
Using the PLC instead of conventional relays for logic control is suggested and its control program is given.
提出了以可编程序控制器(PLC)代替常规继电逻辑控制的方法，并给出了控制程序。
The paper introduced the pneumatic logic control technology applied to auto spray device in roadway development.
介绍了用气动逻辑控制技术研制的煤矿掘进工作面自动喷雾装置。
This method is the logic design base of programmable logic control system or single-microcomputer control system.
此方法是可编程序控制系统或单片机控制系统的逻辑线路设计基础。
The desired output waveform is selected under logic control by setting the appropriate code at the A0 and A1 inputs.
通过设置A0和A1输入端适当的电平，用逻辑控制的方法来选择所需的输出波形。
Two methods of controlling a double inverted pendulum are presented: fuzzy logic control and hierarchical fuzzy control.
阐述了基于二级倒立摆的两种模糊控制方法，即模糊逻辑控制方法和分层模糊控制方法。
Man-machine inter-facial can program logic control, pneumatic, servo motor drive, advanced sterilizing and asepsis keeping.
人机界面，可编程控制、气动、伺服电机驱动，先进的杀菌与无菌保障。
This paper discusses the problem in testing texture and weight of cloth with industrial fuzzy logic control washing machine.
探讨了模糊控制工业洗衣机课题研究中布量、布质的检测问题。
Integrating fuzzy logic control and sliding mode control, a new design method of fuzzy sliding mode controller is introduced.
将模糊逻辑控制与滑模控制相结合，给出了一种模糊滑模控制器的设计方法。
Applying fuzzy logic control technology to design fuzzy logic torque control strategy of the parallel hybrid electric vehicle.
利用模糊逻辑控制技术，设计了并联混合动力汽车的模糊逻辑扭矩控制策略。
The TR400 is a Full Logic Control Process Ratemeter that can display any production rate or time in process easily and accurately.
TR400反转探测器是一款逻辑控制的过程速率计，可现实任何产品在加工过程中的速率或时间，方便，精确。
A general introduction was made on effect, control principle and PLC logic control of the loop control system in high speed rod rolling.
概述活套控制系统在高速线材轧制中的作用、控制原理、PLC逻辑控制及活套调节对精轧机和夹送辊、吐丝机之间张力的影响。
Therefore this article has emphatically studied on the application of fuzzy logic control in the switched reluctance motor drive system.
因此本文着重研究了模糊逻辑控制在开关磁阻电机调速系统中的应用。
By a simple Fourier analysis, this paper introduces how to design a direct torque controller according to fuzzy logic control principle.
用傅立叶分析，把变频调速原理引入直接转矩控制中，并在此思想指导下设计了模糊速度控制器，大大简化了系统设计和计算。
Today, the PLC is no longer confined to the logic control, motion control, process control and other fields has also played a very important role.
今天，该公司已不再局限于逻辑控制，运动控制，过程控制及其他领域也发挥了非常重要的作用。
In this paper, a motion logic control system based on the complex programmable logic device (CPLD) for remote control pruning robot was presented.
该文根据作业要求，研制了基于复杂可编程逻辑器件的自动立木整枝机运动控制系统。
Logic control unit (LCU) for electric locomotive is new type of contactless control equipment combining microcomputer and power electronic devices.
电力机车逻辑控制单元(LCU)是一种用微机和电力电子器件构成的新型无触点控制装置。
In this paper, a fuzzy logic control based on genetic algorithms for complex nonlinear vibration systems of multiple degree of freedom is proposed.
本文对于复杂的多自由度非线性振动系统提出了基于遗传算法的主动模糊控制方法。
Logic control unit (LCU) for electric locomotive is a new type of contactless control equipment combining microcomputer and power electronic devices.
电力机车逻辑控制单元(LCU)是一种用微机和电力电子器件构成的新型无触点控制装置。
This text draws the schematic circuit diagram of operating logic control system, and attaches basic operation control program under this working model.
文中画出了运行逻辑控制系统的电路原理图，并附有该工作模式下的基本运行控制程序。
This paper introduced an interlocking logic control system, which realized with Siemens LOGO! The hardware and software design of this system were given.
介绍了运用西门子公司的LOGO ！实现的一种联锁逻辑控制系统，阐述了系统的硬件组成及软件编程。
The motor is linked up to a programmable-logic control system, and can be switched on and off automatically in the relevant phases of the mashing process.
电机与一台可编程序控制器连接，可以在糖化过程的每个阶段自动打开或关闭，而且还可发出不同频率。
The PLC is applicated in the steel tube galvanization process replace of traditional relay logic control to realize the automatic operation and fault treatment.
介绍采用PLC替代传统的继电器逻辑控制对钢管热镀锌的生产实现自动运行及故障处理。
The PLC is applicated in the steel tube galvanization process replace of traditional relay logic control to realize the automatic operation and fault treatment.
介绍采用PLC替代传统的继电器逻辑控制对钢管热镀锌的生产实现自动运行及故障处理。
应用推荐