The mechanism of wear resistance of the as-cast manganese steel was mainly analyzed.
并重点分析了铸态锰钢的抗磨机理。
The austenite manganese steel when added to with Chromium element appears a new phase.
研究了铬加入高锰奥氏体钢中后，原奥氏体高锰钢组织中出现的一种新相。
Features: the lifting mechanism adopts high strength manganese steel rectangular tube production.
特点：举升机构采用高强度锰钢钜形管制作。
It was benifit to use the rubber lining instead of the manganese steel lining in the ball crusher.
球磨机采用橡胶衬板代替锰钢材板具有许多优点。
Also practical application indicates that it can survive two times longer than the high manganese steel.
现场应用表明：其使用寿命是高锰钢的两倍以上。
The results show that it can be used in carbon steel, high manganese steel, iron or cuprum alloys castings.
生产性试验表明，该涂料用于生产碳钢、高锰钢、铸铁及铜合金铸件均可获得令人满意的结果。
And if the purple red: nonmagnetic as high manganese steel, magnetic usually usually steel or low-alloy steel.
而假如变紫红色：无磁性的为高锰钢，有磁性的通常为通常钢或低合金钢。
Austenitic manganese steel, which serves as large riding wheel at open-cut coal mine, belongs to hardworking material.
用于露天煤矿大型托轮的高锰钢属于难加工材料。
Bit using manganese steel manufacturing, through special processing, are suitable for all kinds of geological environment.
钻头采用锰钢制造，经过特殊加工处理，适用于各种地质环境。
The results show that the wear resistance of casting composite medium manganese steel is 5.41 times that of Hadfield steel.
结果表明：铸造复合中锰奥氏体钢的耐磨性是高锰钢的5.41倍。
It is very difficult to welding a high carbon steel rail and a high manganese steel frog, which is still a worldwide puzzle.
碳钢钢轨与高锰钢辙叉的焊接难度很大，仍属国际性难题。
The wear resistance of casting composite medium manganese steel has been studied under the condition of impact abrasive wear.
研究了铸造复合中锰奥氏体钢在冲击磨料磨损条件下的耐磨性能。
Broken walls, rolling ace tabular wall made of imported high-manganese steel, greatly reducing wear, the useful life by 70% -90%.
破碎壁、轧臼壁采用进口高锰钢制作，极大降低磨耗，使用年限提高70% - 90%。
The effects of water toughening quality on the toughness at low temperature of high-manganese steel was studied using impact -tests.
通过冲击试验，研究了水韧处理质量对高锰钢低温韧性的影响。
The high manganese steel was processed by the conventional shot peening technology, and the surface microstructure was characterized.
利用传统的喷丸技术对高锰钢表面喷丸处理，研究材料表层的组织结构特征。
The modified austenitic manganese steel is suited for the operating condition of impact-corrosive wear, chisel-cutting wear and high stress wear.
改性奥氏体锰钢适用于冲蚀磨损、凿削磨损以及高应力磨损等工况条件下。
Our abrasion resistant ceramics performance is 266 times of manganese steel and 171.5 times of high-chromium cast iron calculated by weight loss.
根据磨损重量计算，我厂生产的耐磨陶瓷性能相当于锰钢的266倍，相当于高铬铸铁的171.5倍。
The results show that the resistance of low carbon high alloy steel is better than that of the high manganese steel under the same test condition.
结果表明，在相同试验条件下低碳高合金钢的冲击腐蚀磨损性能要优于高锰钢的。
In this paper the effect of alloyed modification for carbon content, carbide shape and distribution in austenitic manganese steel has been studied.
研究了合金化变质改性对提高奥氏体锰钢基体碳含量，改变析出碳化物形态及分布的影响。
The field tests indicated the service life of this alloy steel hammer is higher than high manganese steel, especially the cast can be raised to 60%.
装机试验表明，该材质锤头使用寿命比高锰钢高，特别是铸态中锰钢锤头寿命可提高60%。
A kind of new low-alloy steel with strength was studied to overcome the deficiency of traditional high-manganese steel used in making creeper truck.
针对传统的高锰钢作为履带板材料在实际应用中的不足，试验采用了一种新型的铸造低合金高强度耐磨钢替代。
The study of damage of low temperature brittleness on high manganese steel has been carried out by theoretical analysis and a series of impact tests.
通过理论分析和系列冲击试验，对高锰钢出现的低温脆性损坏进行了分析研究。
Adopting the imported high strength manganese steel and international lead step molding technology, wear-resistant anti-pressured and long service life.
采用进口高强度锰钢和国际领先的一次成型铸造技术，耐磨、抗压、使用年限长。
Large scale high manganese steel alligator board produced by EPC process can meet the request of design, and use with hot remained water toughening treatment.
消失模铸造生产大型高锰钢颚板，并按设计的工艺要求进行生产，利用余热水韧处理。
Solidification microstructures in heavy section high manganese steel casting were simulated using coupling cellular automaton(CA)and finite element method(FEM).
采用元胞自动机与有限元相耦合的方法模拟厚断面高锰钢铸件凝固组织。
The influences of cryogenic treatments on the microstructure, material performances and the impact wear resistance of the superhigh manganese steel are studied.
主要研究了深冷处理对超高锰钢组织、性能及耐磨性的影响。
Effect of polarization potential on the corrosion-wear behavior of high manganese steel in ore slurry was investigated by a self-made impact corrosive-wear tester.
通过自制的冲击腐蚀磨损试验机，施加不同极化电位对高锰钢在矿浆介质中的冲击腐蚀磨损行为进行了试验研究。
It was found by industrial experiments that the wear resistance of the crusher hammers is about 4 times higher than that of the high manganese steel crusher hammers.
工业实验表明，复合变质处理高铬铸铁锤头的耐磨性约是高锰钢锤头的4倍。
Our products: Various gray iron, ductile iron, common cast steel, low-alloy steel, high manganese steel, etc various parts of architectural and mechanical engineering.
本公司主要生产各种灰铁件、球铁件、铸钢件、高猛钢件等各种建筑、工程机械用零部件。
Our products: Various gray iron, ductile iron, common cast steel, low-alloy steel, high manganese steel, etc various parts of architectural and mechanical engineering.
本公司主要生产各种灰铁件、球铁件、铸钢件、高猛钢件等各种建筑、工程机械用零部件。
应用推荐