In quadrature elements, variations of material properties are simulated by adopting material parameter of Gauss point.
在积分网格中，取高斯点的材料参数来模拟材料特性的变化。
In case of foundation and road embankment material parameter, valid reinforce range results is 1.5-2.5 of hammer's diameter.
在常用的地基或填方参数情况下，有效加固范围是夯锤直径的1.5 ~ 2.5倍。
The stochastic material parameter of bending beam can be integrated with its stochastic geometrical parameter into one stochastic parameter.
弯曲梁的随机材料参数和随机几何参数可结合为一个随机参数——弯曲刚度。
By simulating in DYNAFORM, the influences of the factors, such as the friction coefficient, die clearance and material parameter 'sn and r, on stamping formability were studied.
应用dynaform软件进行模拟计算分析，研究了摩擦系数、模具间隙、材料参数(n,r值)等因素对零件成形的影响。
On the basis of optimal material parameter, a simulated fatigue test was conducted on a Y7 airplane stringer joint. The effects of irradiant parameter on fatigue life was studied.
在材料激光辐照参数优选的基础上，对Y7机长桁接头进行了辐照处理，并进行了模拟疲劳实验，研究了辐照参量对疲劳寿命的影响。
The present paper deals with the material parameter identification of orthotropic plate with a circular hole by the approach of integrating optimization and boundary element analysis.
结合优化技术和边界元分析，针对正交各向异性孔板进行了材料参数的识别。
These arithmetics are applied to recognise information of erode features in coating material and compute erode feature parameter of coating material.
并利用这两种算法对镀层材料腐蚀特征信息进行识别，计算镀层材料的图像腐蚀特征参数。
These arithmetics are applied to recognise information of erode features in coati ng material and compute erode feature parameter of coati ng material.
并利用这两种算法对镀层材料腐蚀特征信息进行识别，计算镀层材料的图像腐蚀特征参数。
The results show that the couple stress fluid flow behavior depends on not only the coefficient of viscosity, but also the material constant responsible for the couple stress parameter.
所得结果表明应力偶流体运动特性不仅依赖于物质粘性常数，而且强烈地依赖于应力偶流体特有的与固体颗粒尺度有关的物性常数。
The bonding strength is ensured by the correct choice of substrate material, surface preparation, adhesive and process parameter.
粘合强度可以通过选择正确的基体材料、表面处理、胶粘剂和工艺参数得以保证。
Then the compactness postulate and roller parameter of embankment material are researched by blasting test and roller test on site.
通过现场爆破试验和碾压试验，研究坝体填筑材料的密实度要求和碾压参数；
The extracted beam current depends on operating parameter of source, extraction voltage and cathode material.
引出束流大小与源的工作参数、引出结构和电压以及阴极材料有关。
The buckling equivalent length of a pile is not only used in the buckling of the pile but also one of the necessary parameter checking the material strength of the pile.
基桩的稳定长度不仅用于基桩的纵向屈曲问题，而且也是桩身材料强度验算必不可少的参数之一。
The performances of tungsten and its alloy, rational choice in machining of cutting tool material and parameter are introduced in this paper.
文中介绍了钨及其合金的性能熏以及在切削加工时刀具材料与几何参数的合理选择。
Plan compilation is Introduced by basis of compilation, area of apply, primary material, production technology and design parameter on Pretensioned Spun Concrete Pile.
对《先张法预应力混凝土管桩》图集的编制依据和适用范围、主要材料、生产工艺及有关设计参数作简单介绍。
Most of the materials research papers and abstracts surveyed were experimental, involving the fabrication and subsequent performance parameter testing of the fabricated material.
大多数材料研究论文和文摘，涉及制造和随后材料半成品性能参数的测试，都是试验性质的。
This paper sates that selecting bellows material correctly, designing waveform parameter and fatigue life, ensuring installation quality can improve the safety and reliability of bellows compensator.
通过正确地选择波纹管制作材料和结构、合理设计波形参数和疲劳寿命、保证安装质量等措施，可提高波纹管补偿器的安全可靠性。
The paper introduces a portable HP heavy flow grease ejector and analyzes its work principle, structural features. parameter calculation. material selection and effects in use.
介绍了一种便排移动式高压大流量润滑脂注油机。对其工作原理、结构特点、参数计算、材料选用及使用效果作了办好说明。
A good repairing result was obtained by combining reasonable spraying process and material matching with this parameter in repairing oil cooling set of stainless steel.
用此工艺参数修复船用不锈钢油冷套，加之合理的喷涂工序与材料匹配，达到良好的修复效果。
The difference in optical parameter of such material will be risen due to the change of some factors in their technological process.
由于制造工艺上的原因，其性能和光学参数会有一些差异。
Combining the indoor study with the test-road study, this paper has recommended the parameter of choosing material and mixture design, which suit to the pasturing area road gravel base.
在结合室内研究和试验路研究的基础上，推荐了适合牧区道路粒料基层的材料选择参数及配合比设计。
And dynamic response of different material and different parameter composite cylinder shell to underwater explosion load is analyzed.
基础上分析了不同材料圆柱壳和不同参数复合材料圆柱壳在水下爆炸载荷作用下的抗冲击性。
For HDPE pipe material, the weibull stress maybe an effective fracture parameter.
对于HDPE管道材料，威布尔应力可以作为有效的断裂控制参量。
The study has laid a base for material process parameter optimization, tool selection optimization and technics programming.
铣削加工有限元模拟研究为铝合金切削加工的工艺参数优化、刀具的优选和工艺规划奠定了基础。
The superiority and inferiority of PM machine is closely related with the function parameter of permanent magnet material which is being used.
永磁电机性能的好坏，直接与所采用的永磁材料的性能参数有着密切的关系。
This work can provide material in retrieving the parameter of atmospheric aerosol and modeling polarized properties of the atmospheric aerosol scattering radiation.
此项工作为反演大气参数、建立大气散射辐射偏振特性模型提供素材。
The laminated material is an advanced compound material. A new vibratile drilling technology with step type variable parameter is suitable IC process the new laminated material.
叠层材料是一种先进的复合材料，阶跃式变参数振动钻削新工艺最适合于加工新型叠层材料。
The laminated material is an advanced compound material. A new vibratile drilling technology with step type variable parameter is suitable IC process the new laminated material.
叠层材料是一种先进的复合材料，阶跃式变参数振动钻削新工艺最适合于加工新型叠层材料。
应用推荐