Analyses the inadequacy of the PID controller in current application, give a fuzzy adaptive PID controller and simulate with MATLAB simulation software.
分析了目前应用的PID控制器的不足，提出了一种模糊自适应PID控制器，并利用MATLAB软件对其进行了仿真。
Based on the theory of random process and method of numerical simulation, a new methodology of generating random wind forces by MATLAB software is developed.
基于随机过程理论和数值模拟方法，提出了利用MATL AB软件模拟生成随机风荷的一种新途径。
According to BLDC mathematical model and the movement principle, a simulation model of BLDCM control system by the SIMULINK and PSB block of software MATLAB is built in this paper.
根据无刷直流电机的数学模型和运行原理，通过MATLAB软件的SIMULINK和PS B模块，搭建了电机及整个控制系统的仿真模型。
Software for simulation of particles aggregation was built on MATLAB platform.
在MATLAB平台上构建了粒子聚集过程的模拟软件。
According to the characteristics of "signal and system" and "digital signal processing", the MATLAB software was used effectively on the simulation experiment, course design and multimedia teaching.
针对“信号与系统”、“数字信号处理”课程的特点，运用MATL AB软件进行模拟实验、课程设计，并运用多媒体教学提高了教学效果。
Combined with MATLAB software, the two methods MATLAB language programming, the combination of FIS editor and SIMULINK are used to realize this kind of controller design, analysis and simulation.
结合MATLAB软件，用MATLAB语言编程及FIS编辑器与SIMULINK相结合两种方法实现了这种控制器的设计、分析与仿真。
In addition, this paper chooses VB to develop application software for PC, and designs interface of interpolation simulation, and compiles interface program of VB and MATLAB, as well as VB and PLC.
另外，选用VB进行PC机应用软件的开发，编制了插补仿真界面，编写了VB与MATLAB接口程序，以及VB与PLC通信的程序。
Regarding to the time lag of air supply system software MATLAB / SIMULINK were utilized to create the simulation model of fuel cell dynamic output performance as power level changes.
在考虑空气系统的时间滞后基础上，基于集总参数模型利用MATLAB /SIMULINK软件平台建立电池的瞬态响应仿真模型。
With the help of MATLAB mathematical software under WINDOWS, ASPS-CO simulation system was developed.
应用MATLAB数学软件，在WINDOWS操作平台上开发出模拟系统。
Finally, according to the inertia of the disc brake electricity mathematical model analysis, the use of MATLAB software SIMULINK tool of inertia system simulation.
文章的最后根据对盘式制动器电惯量模拟的数学模型的分析，使用MATLAB软件中的SIMULINK工具箱对电惯量模拟系统进行仿真。
It concludes that MATLAB is a powerful software for computer aided control System's design and analysis as well as System simulation and identification. The programming method is easy to learn.
结果表明，用MATLAB进行控制系统计算机辅助设计和计算、实现系统仿真极为简单方便，是进行计算机辅助设计和分析强有力的软件工具。
In this paper SIMULINK, a dynamic simulation tool in MATLAB software, is used to establish the simulation model of the asynchronous motor starting process, and simulation results...
利用MATLAB软件中的动态仿真工具SIMULINK建立了异步电动机起动过程的仿真模型，仿真结果验证了判据的正确性。
In simulation, this paper makes use of the most popular scientific software, MATLAB, and develops the corresponding simulating system with the SIMULINK in it.
在进行仿真的时候，本文采用了广泛应用的Matlab，使用Simulink功能开发了相应的仿真系统。
To avoid these problems, this variable using MATLAB software, the servo variable stages of small-displacement pumps have been studied with the simulation test results are analyzed.
为避免上述问题白勺出现，文章利用MATLAB软件对伺服变量泵白勺小排量变量阶段停止了分析，结合试验对仿真结论停止了分析。
This paper studies methods of communication system simulation and constructing model with MATLAB software , and gives the several simulation examples and the results.
研究了利用MATLAB进行通信系统仿真及其建模的方法，给出了几个典型仿真范例及仿真结果。
MATLAB is a traditional software based on math modeling, and the perfect curve of simulation could be gotten by establishing the math modeling and selecting the parameters reasonablely;
MATLAB是基于系统数学模型的一种传统仿真软件，通过合理选择系统相关参数、并对系统模型仿真，可以获得比较理想的仿真结果；
The principium of the test-bed was introduced, and the dynamic simulation of the measured hydraulic cylinder system was made by using application software MATLAB.
本文介绍了液压缸试验台的工作原理，并运用MATLAB对被测缸液压系统进行了动态仿真；
This program will be made into GUI software Matlab, proper parameters can be changed for different diffractive simulation, and the simulation results and experimental results accord with very well.
本文将Matlab程序制作成GUI软件，适当改变参数即可进行不同的衍射实验仿真，仿真结果与实验结果符合得相当好。
This paper introduces the design and research of a set of high-speed and exact mechanic orientation device, and USES application software MATLAB to the dynamic simulation of this device.
介绍了一套高速、准确的机电定位系统的设计研究，并运用MATLAB对机电定位系统进行了动态仿真。
A dynamic simulation tool, SIMULINK software package in MATLAB, is taken as the development tool, and applied in the dynamic response computation of the hydraulic servo closed-loop control system.
以MATLAB中动态仿真工具SIMULINK软件包为开发工具，将其应用于该液压伺服闭环控制系统的动态响应计算中，针对上述两种闭环控制系统，给出了考虑干扰量情况下的SIMULINK仿真方法。
A dynamic simulation tool, SIMULINK software package in MATLAB, is taken as the development tool, and applied in the dynamic response computation of the hydraulic servo closed-loop control system.
以MATLAB中动态仿真工具SIMULINK软件包为开发工具，将其应用于该液压伺服闭环控制系统的动态响应计算中，针对上述两种闭环控制系统，给出了考虑干扰量情况下的SIMULINK仿真方法。
应用推荐