In addition to machining, metal removal can be accomplished by chemical or electrical methods.
除了机加工以外，金属的去除还可以通过化学或者电学的方法来达到。
The engine lathe , one of the oldest metal removal machines, has a number of useful and highly desirable attributes.
普通车床作为最早的金属切削机车的一种，目前仍然有许多有用的和为人们所需要的特性。
Such as the use of algae, bacteria, fungi as a biological adsorbent, they have a good adsorption of heavy metal removal.
如采用藻类、细菌、真菌作为一种生物吸附剂，它们对多种重金属都有较好的吸附去除效果。
The trends and application foreground of heavy metal removal technology for wastewater are also elaborated in this paper.
并对上述方法的机理、研究进展、优缺点进行了评述，同时阐述了处理重金属废水的技术和方法的发展趋势。
The present paper expounds the alkali metal removal mechanism and method, providing a realistic basis for the further study of such a removal process.
本文介绍了碱金属的脱除机理及脱除方法，为碱金属脱除的进一步研究提供了基础。
In this process, metal removal is achieved through combining the rotary motion of the milling cutter and linear motions of the workpiece simultaneously.
在此工艺中，金属去除是通过铣刀的旋转运动和工件的直线运动的组合实现的。
The experiment results show that the pulse current is conducive to paucity of metal removal, and mirror or quasi - mirror finish can be achieved conveniently.
实验结果表明，脉冲电流有助于进行微量电解蚀除，便于获得镜面或准镜面。
In many heavy metal removal ways, bioleaching method, because of its low consumption, low operation cost, and high heavy metal removal rate, attracts people's attention.
在去除污水污泥中重金属的诸多方法中，生物淋滤法因其耗酸少、运行成本低、重金属去除效率高等优点而倍受人们的关注。
Several factors affecting the cutting force of milling TC4 during dry cutting with nitrogen medium are studied. The cutting parameters are optimized to enhance metal removal rate.
通过TC4铣削加工时的铣削力试验，研究了干切削时和有氮气介质铣削时影响铣削力大小的几个因素，为提高金属去除率优化了切削参数。
Now in terms of the removal of heat we've got to not only take that fluid, it's possibly as you can see here a liquid metal.
现在关于热量的除去，我们必须,不只是使用液体，它可能,正如你们在这看到的，液态金属。
The system is intended for smoke removal. Any obtained metal particles will go back to the furnace.
该系统用于排烟，任何获得的金属微粒都将回炉。
Metal cutting process is a very complex process. Fig. 7.2 shows the basic material removal operation schematically.
金属切削过程是一个很复杂的过程。图7.2用图的形式显示了基本材料去除作业。
Grinding is a manufacturing process that involves the removal of metal by employing a rotating abrasive wheel.
磨削是通过采用旋转磨轮去除金属的制造工艺。
The application of wet dust removal technology in grinding and polishing enterprises involving aluminum, magnesium and other metal products.
在涉及铝镁等金属制品打磨抛光作业企业中推广使用湿式除尘工艺。
Metal manufacturing technology is a process contains multiscale coupling phenomenon where fracture of atomic bond in the microscopic area will lead to the material removal in the macroscopic area.
金属切削工艺是一种隐含着微观和宏观之间耦合作用的过程，微观局部原子间化学键的断裂将会最终导致材料的宏观去除。
Based on the analysis of test result on filtration of airborne particle, the feasibility on removal of oil mist by using wash-type metal filler air filter is analyzed.
在对大气尘过滤试验结果进行整理分析的基础上，对采用洗涤式金属填料空气过滤器去除油雾的可行性进行了分析。
Metal flow takes place within the plastic range of the metal, so that the bend retains a permanent set after removal of the applied stress.
金属的流动发生在金属的塑性变形范围之内，因此在施加的外力去除之后弯曲保持永久的变形。
The possibilities of removing colloidal hydroxides containing heavy metal ions removal from water with ultrafiltration membranes are studied in this paper.
本文研究了用超滤膜去除水中胶态重金属离子氢氧化物的可能性。
The catalytic oxidation ability of 13 metal ion-exchanged montmorillonites are investigated in oxidative removal of the sulfides which are the main pollutant in the moult and alkali swell waste water.
在氧化法去除含硫脱毛碱膨胀废水内主要污染物硫化物的过程中，考察了13种金属离子交换蒙脱石的催化氧化能力。
On the base of the constant removal rate of the metal material, the motion model of tangential point tracing grinding of Non-round parts should be given respectively according to type of the parts.
基于恒金属去除率的原则，根据零件的特点分别建立了非圆零件切点跟踪磨削的运动模型。
The Influence of three grinding fluids on grinding force, metal material removal rate, surface roughness of ground workpiece, and the extent of grinding bum were investigated in this paper.
本文研究了三种磨削液对磨削力、金属磨除率、表面粗糙度和烧伤程度的影响。
In order to realize dressing of fine diamond grinding wheel effectively, removal behavior of metal bond for dry and wet coolants is investigated.
为有效地实现微细金刚石砂轮的修锐，建立单脉冲电火花放电去除加工的试验系统，研究金属结合剂的气中和液中电火花放电去除机理。
A survey of the principal methods of heavy metal ions removal from water is given in this paper and the emphasis is laid on the new technologies developed in recent years.
综述了脱除水中重金属离子的各类主要方法，侧重介绍了近年来开发的若干新技术。
JMBF also had high turbidity and COD removal ratio when treating petrochemical plant wastewater, mud river water, metal coating waste water, canny wastewater and domestic wastewater.
对石化厂废水，含泥河水，喷漆废水，罐头厂废水，生活污水的浊度与COD的去除率均较高。
Character: in the process of paraffin and oil removal, it doesn't corrode the applicable metal surface.
特点：除蜡除油过程中对所适用的金属表面无腐蚀。
This paper expounds the necessity for improving oil and rust removal process on metal surface, as well as its operating mechanism, the whole process, the bath control and its main characteristics.
阐述改进金属表面除油除锈工艺的必要性、工作机理、工艺全过程、槽液控制和主要特点。
By adding magnesium powder into the coating of electrode, the sulphurs removal in deposited metal was satisfactory.
通过理论分析及实验，探讨了手工电弧焊焊条药皮中添加金属镁粉的脱硫效果。
With fully hardened metal spikes, replaceable, for removal of paint and synthetic sealant, adhered underlay, cork tiling and adhesive residue, for roughening industrial floors.
硬质合金尖刀，清除油漆，秘封剂，胶粘的地胶，软木层，胶水，毛毡，打磨工业地坪。
In this paper, the removal methods of heavy metal ions, lead, zinc, antimony, contained in the acidic mine underground water were studied.
对矿山酸性地下水中所含铅、锌、锑三种重金属离子的去除方法进行了试验研究。
In this paper, the removal methods of heavy metal ions, lead, zinc, antimony, contained in the acidic mine underground water were studied.
对矿山酸性地下水中所含铅、锌、锑三种重金属离子的去除方法进行了试验研究。
应用推荐