The results show that the fusion zone is metallurgical bonding.
结果表明,沉积层和基材为冶金结合。
Metallurgical bonding between the nitrided layer and Ti substrate was observed.
氮化层与基体材料之间为冶金结合。
All the above ensure quick and high quality metallurgical bonding between flyer plate and base plate.
这些特征保证了复板和基板之间的快速优质冶金结合。
The result shows improving complex sample's temperature is good to gain metallurgical bonding interface.
实验结果表明:提高浇注时复合试样的整体温度有利于获得界面的冶金结合。
The experimental results indicate that excellent metallurgical bonding is obtained between alloying layer and substrate.
结果表明,合金元素与基材实现了良好的冶金结合。
Microhardness of the remelting coating is higher than that of spraying coating because of oxide layer and metallurgical bonding.
由于表面氧化层的存在和内部冶金结合的形成,重熔层硬度较喷涂层高。
The results show that the microstructure of laser alloying zone is compact, grain is fine, and has metallurgical bonding with matrix.
实验表明:激光合金化层组织致密,晶粒细化,与基体呈冶金结合。
The interface layer of metallurgical bonding will not induce brittle fracture and will share the ductile SEM fractographs of the substrate.
这种界面冶金结合层并不会引起脆性断裂,具有与基材相同的韧性断口形貌。
The metallurgical bonding was achieved by combining effect of diffusion and local melting when the explosive parameters were selected correctly.
当爆炸参数选择正确时,可通过扩散和局部熔化的共同效应而达到冶金结合。
The results show that the bonding way between elements is metallurgical bonding and the alloying rate rises with the increase of sintering temperature.
结果表明, 在不同烧结温度下,烧结体中各元素之间产生冶金结合, 且合金化程度随温度的升高而增大。
Results indicated that plasma surface metallurgical coating of Fe-Cr-Ni-B-Si had well wettability, and metallurgical bonding was obtained between coating and substrate.
结果表明,等离子表面冶金合金化涂层对基材具有良好的润湿性,基材表面熔化区的形成使得涂层与基材实现了完全的冶金结合。
The experimental results showed that the substrate had a small dilution to coating alloy, and the excellently metallurgical bonding was formed between coating and substrate.
结果表明,基体对涂层合金的稀释较小,涂层与基体之间形成良好的冶金结合;
EDS spectrum analysis found that the process of laser cladding elements occurred in the proliferation of cladding layer and the substrate to achieve a good metallurgical bonding.
EDS能谱分析发现在激光熔覆的过程中发生了元素扩散,熔覆层与基体实现了良好的冶金结合。
The Fe-based composite coatings were deposited on the attrition spot of cutting pick by plasma jet surface metallurgy, and metallurgical bonding was obtained between the coating and the substrate.
采用等离子束表面冶金技术,在采煤机截齿磨损严重的部位制备了与基材呈冶金结合的铁基复合涂层。
The present paper introduces two different methods for treatment of the metallurgical wastes, namely the cold bonding pellet and pelletization in min-shaft furnace.
介绍了两种处理冶金废料的方法:冷固结团块法和微型竖炉球团法。
The present paper introduces two different methods for treatment of the metallurgical wastes, namely the cold bonding pellet and pelletization in min-shaft furnace.
介绍了两种处理冶金废料的方法:冷固结团块法和微型竖炉球团法。
应用推荐