This paper studies the simulation method of tie line power flow control among areas of an interconnected network in load flow calculation.
本文对潮流计算中互联电网各区域间的联络线功率控制的模拟计算方法进行了研究。
The simulation results verify the high precision of the proposed compensation method regardless of the waveform of ct primary current, remanent flux level, and load characteristic.
仿真结果验证了所提补偿方法的高精度，而且不受CT负载特性、CT剩磁情况及原边电流直流成分的影响。
A system simulation study was done for full digital welding inverter, and a method of connecting dynamic arc load model to the system with controlled source was presented.
从整体上对数字控制逆变焊机系统进行了仿真研究，提出用受控源的方法实现了动态电弧负载模型与系统的连接。
Considering the material parameters and the load changeability, the reliability of intensity and stability for the concrete gravity dam is researched with the method of Monte Carlo simulation.
应用蒙特卡罗模拟方法，考虑材料参数和荷载的变异性，对混凝土重力坝强度和稳定性的可靠性分别进行了研究。
The simulated ultimate load formula and double-control design method of slender eccentrically compressed reinforced concrete member were proposed by nonlinear finite element simulation analysis.
并通过非线性有限元模拟分析，给出了细长钢筋混凝土压杆的极限承载力表达式以及由此确定的双控设计法。
An efficient and practical method of wind load simulation. Commonly used in engineering practice using the wind speed spectrum, the use of multi-dimensional self.
提出了一种有效而实用的风荷载模拟方法。利用工程实际中普遍采用的风速谱，采用多维自。
Based on the comprehensive load model considering the distribution network as the research object, by digital simulation method, and the load model for an in-depth study of the simulation.
本文以考虑配电网络综合负荷模型作为研究对象，采用数字仿真方法，对该负荷模型进行了较为深入的仿真研究。
Simulation results show that the developed control method possesses better steady-state behavior and dynamic performance and strong adaptive capacity to reactive power variation of load.
结果表明，文中采用的控制方法具有较好的动态性能和稳态性能，对负载无功变化的适应能力强。
The effectiveness of the method is demonstrated through simulation of two flexible-link and flexible-joint 3R robots manipulating a rigid load.
文中就两个具有柔性关节和柔性臂的3R机器人协调操作刚性负载为例，验证了本方法的有效性。
The simulation results show that the new control method can efficiently overcome the fuel disturbance and the load disturbance and maintain the stability of main steam pressure.
仿真试验表明，该控制方案可以有效克服燃料量内扰和负荷外扰对主汽压力的影响，维持主汽压力的稳定。
The proposed method is applied in the numerical simulation of random wind load on Nanjing Olympic Stadium. The results verify the effectiveness and efficiency of the simulation method.
将该数值模拟技术应用于南京奥林匹克体育中心体育场的随机风荷载模拟，计算结果表明了该方法的有效性。
The simulation results of practical load forecasting show that the proposed method to select reference points and peak-valley load correction are more effective.
实际电网负荷预测的仿真结果验证了文中提出的相空间相关邻近点的选择方法与峰谷荷修正思想的有效性。
An efficient and simple calculation method is pro-posed for the simulation of the startup process with base load, which can greatly save computation time.
提出一种简单有效的方法计算带压仓负荷的开机过程，能大大节省计算时间。
This paper presents a simple and efficient dynamic load balancing method on the base of static load balancing, which aim at the non-balancing of 3d molecular dynamic parallel numerical simulation.
文章针对三维分子动力学并行数值模拟中出现的负载不平衡现象，在静态负载平衡基础上，提出了一种简单有效的动态负载平衡算法。
The simulated ultimate load formula and double-control design method of slender eccentrically compressed reinforced concrete member were proposed by nonlinear finite element simulation...
并通过非线性有限元模拟分析，给出了细长钢筋混凝土压杆的极限承载力表达式以及由此确定的双控设计法。
According to mathematical model of load force, the paper has designed a simulation system of aircraft force-feeling system by the method of electro-motive force servo loading.
依据飞机纵向操纵负载力的数学模型，采用电动式力伺服加载的方式设计了飞机纵向操纵人感仿真系统。
The performance of multifrontal method is evaluated and compared with direct sparse factorization method through load flow calculation and transient stability simulation using IEEE benchmark data.
以IEEE检验系统为例，通过数值试验将多波前算法与电力系统分析中常用的稀疏三角分解技术进行对比分析。
Numerical simulation of finite element method for pile-bucket foundation under uplifting load were conducted by making use of ANSYS software.
通过使用ANSYS软件，对桩-桶基础上拔试验进行有限元数值模拟。
The application of the Load Simulation Method (LSM) in the evaluation of the remaining fatigue life for railway steel bridges is introduced.
介绍了荷载模拟法在铁路钢桥疲劳剩余寿命评估中的应用。
The finishing die was designed. According to finite element numerical simulation method, the filling state, load prediction and bending deformation of the local finishing process were obtained.
设计了局部精整模具，并应用有限元数值模拟方法分析了局部精整成形过程中的充填情况、成形载荷以及弯曲变形的规律。
By means of circuit topology theory and loop current method, simulation and calculation are performed on the 12-phase power winding of an induction generator with rectifier load system.
为了对异步发电机十二相功率绕组带整流负载系统进行仿真计算，采用了基于电路拓扑理论的回路电流法。
The size and regularity of train loads was obtained by field test, the effects of train dynamic load acting on the retaining structure was analyzed by using numerical simulation method.
对列车荷载进行现场测试，得出列车荷载大小及规律，借助数值分析的手段，分析列车动载对偏压基坑围护结构的影响。
The size and regularity of train loads was obtained by field test, the effects of train dynamic load acting on the retaining structure was analyzed by using numerical simulation method.
对列车荷载进行现场测试，得出列车荷载大小及规律，借助数值分析的手段，分析列车动载对偏压基坑围护结构的影响。
应用推荐