Mild steel is the natural choice for a stove chassis, but such stoves do not last for more than a few weeks in the field.
软钢是炉具底盘的天然选择，但是这种炉子在野外无法熬过几个星期。
Corrosion is an electro-chemical process by which a metal such as mild steel ,returns to its natural state ,state ,such as iron oxide or rust.
上面的译文便犯了定义过宽的错误。 试译：腐蚀是金属（如低碳钢）返回其天然状态（如氧化铁即铁锈）的电化学过程。
Mild steel in this system will dissolve and contaminate the membranes with iron, resulting in reduced efficiency even after cleaning and therefore should not be used.
普通钢在系统中会溶解，铁离子会污染超滤膜，导致在清洗后超滤效果也不好，甚至要更换超滤元件。
"Market booths use a lot of mild steel sections, and mild steel tends to rust, unlike stainless steel, so it needs protection," says architect Daniel Patzold.
建筑师Daniel Patzold说，“市场棚亭使用了大量的碳钢构件，它们和不锈钢不一样，它们很容易生锈，所以必须有保护措施。”
One-way, two-way pressure ball bearing cage generally use steel stamping molding, large size or special use of the bearings are made of brass or mild steel turning cage.
单向、双向压力球轴承保持架一般采用钢板冲压成型，大尺寸或特殊用处的轴承则采用黄铜或软钢车削保持器。
Ferrite and carbon constitute the mild steel.
铁素体和碳组成低碳钢。
Different color shop primer to be used for mild and high tensile steel plates and sections.
不同颜色的车间底漆用于温和、高强度钢板，部分。
Stainless steel has a greater elastic springback than mild steel.
不锈钢的弹性反冲比低碳钢要强。
Inhibitive effects of polyaniline (PANI) for the corrosion of mild steel were studied using visual observation, open circuit potential (OCP) and linear polarisation resistance (LPR).
使用外观观察、开路电位以及线性极化电阻等方法研究了聚苯胺对碳钢腐蚀的阻化作用。
For mild steel immersed cyclically in seawater, -0.95v (SCE) was suggested as the protective potential criteria.
推荐海水间浸低碳钢的阴极保护电位判据为- 0.95V (SCE)。
Mild steel has a high tensile strength, this being 200 times that of concrete.
低碳钢具有很高的抗拉强度，大约是混凝土的抗拉强度的200倍。
Mild steel welding is used in SC - 11, bulges, boiler tube with dc welding etc.
软钢SC-11焊条是用于管子、油槽、锅炉等用直流焊接。
A systematic experimental study has been conducted an mild Steel tubes of various thickness in their perforation by hard steel spheres.
本文通过实验研究了不同尺寸的硬质钢球弹丸对不同壁厚的低碳钢圆钢管的侵彻和穿孔效应；
Mild steel plate flanges , cast stainless steel flanges , wafer-type butterfly valve, 2-piece flange-type ball valve, steel plate.
软钢板法兰，不锈钢铸板法兰，片型蝶阀， 2片式法兰型球阀， 钢板。
The problems about scaling, copper corrosion and mild steel corrosion in circulating water system with high hardness and high alkalinity are expounded.
阐述了高硬度、高碱度循环水系统存在的结垢问题、铜腐蚀问题和碳钢腐蚀问题。
Checker plate or smooth plate, Mild steel or Stainless steel, all are presented to be selected.
花纹板与平板，碳钢与不锈钢，无尽的选择尽在眼前。
The deformation and fracture of mild steel under high frequency bending fatigue has been studied by optical microscope, scanning electron microscope and microhardness determination.
用光学、扫描电子显微镜及显微硬度计，研究了低碳钢在高频弯曲疲劳过程中的形变及断裂。
It is difficult to avoid the cracks using mild steel electrode and common welding technologies.
用普通碳钢焊条与一般焊接工艺是很难避免裂纹的。
Mild Steel reservoirs are coated on all wetted surfaces with a epoxy-tar layer to prevent rust or corrosion.
低碳钢都使用环氧沥青层在其表面镀上湿膜，用以防止生锈或腐蚀。
The research results show that the only addition of RE in mild steel could remarkably improve atmospheric corrosion resistance of mild steels, too.
结果表明：在低碳钢中，仅添加稀土也能明显的提高其耐大气腐蚀性能。
No corrosion of the metallic materials, such as mild steel and copper alloy, of the system will be promoted by this electrolysing method.
此法对冷却水系统的金属材料如软钢和铜合金不会进一步促进腐蚀；
Construction in mild steel or stainless steel . Belting provided per customer requirements . Geared motor drive provided as necessary . Molded or bolt-on flights available.
在低碳钢或不锈钢制造。可根据客户要求定制。可提供齿轮电机驱动提。模压或螺栓型号可选。
The electrochemical method and atomic force microscope(AFM) were applied to study the inhibition mechanism of Im-D, an imidazoline derivate inhibitor, for mild steel in CO2 saturated solution.
应用电化学弱极化法和原子力显微镜（AFM）研究了咪唑啉衍生物类缓蚀剂在模拟深层气井水溶液中对碳钢的二氧化碳腐蚀的抑制效果和缓蚀作用机理。
The resistance spot welding process of mild steel was studied by experimental and finite element methods.
采用试验和有限元数值模拟的方法，对汽车车身低碳钢电阻点焊的过程进行了研究。
A series of experiments on mild steel was conducted to improve the design of the DCB specimens and to examine the reliability of the necking zone model.
进行了一系列对低碳钢的试验以改进试件的设计并考察颈缩区模型的合理性。
Most cases mild or low carbon steel is used for lugs, crowns, dropouts, and various tubes on the frame.
大多数病例轻度或低碳钢为耳使用，冠，辍学，和各种管道的框架。
A computer control system for research is designed in this paper considering the weld penetration control on mild steel in TIG welding with electro eddy sensor.
针对低碳钢t IG焊电涡流传感熔透控制，设计了一套计算机控制的研究装置。
Recommended for cutting aluminum pipe, bronze pipe, brass pipe, copper pipe, galvanized pipe, mild steel and tougher steels including stainless pipe, plus other problem material at slow speed.
推荐用于切割铝管，青铜管，铜管，镀锌管，软钢管和硬钢管，包括不锈钢管，还有其它的材料以缓慢地速度切割。
Recommended for cutting aluminum pipe, bronze pipe, brass pipe, copper pipe, galvanized pipe, mild steel and tougher steels including stainless pipe, plus other problem material at slow speed.
推荐用于切割铝管，青铜管，铜管，镀锌管，软钢管和硬钢管，包括不锈钢管，还有其它的材料以缓慢地速度切割。
应用推荐