After load observer put into use, it has a good actual results to suppress the mill stand vibration.
投入负荷观测器后，对抑制轧机振动起到了良好的实际效果。
A high rigidity mill stand in which the roll can be quickly changed together with guide as been proposed.
提出了一种可同时快速更换轧辊和导卫装置的高刚度轧机机座，适用于棒材、线材和型材轧制。
Compact cooling equipment can be installed downstream of the final mill stand and also upstream of the downcoilers.
小型制冷设备可以安装在最后的轧机架的下方也可以安装在卷板机的前方。
Profile (flatness) : after the establishment of coiling tension, there shall be no wave in the F4 mill stand exit in visual.
板形(平直度)：在卷取张力建立后，F4机架出口带材目测无波浪。
GY-1 mill stand is a new type of housingless mill based on the design principle of short stress path and fewer mating surface.
本文对GY-1型短应力线轧机的基本特点及力学原理进行了初步分析。
In the cold rolling mill, coil open-book will open the machine, and then strip the introduction of a rolling mill stand even with volumes thin.
在冷轧机上，开卷机将钢卷打开，然后将钢带引入五机架连轧机轧成薄带卷。
This universal mill stand can be used not only in a new welded steel pipe mill to be designed but also in the reform to old welded steel pipe mill.
这种机架不仅可以用于新设计的焊管机组中，而且还可以用于对现有焊管机组的改造。
Handling the mass of a mill stand housing as a distributed parameter and simplifying it as a elastic bar to calculate is the characteristics of this paper.
本文的特点是机架质量按分布参数处理，并简化为弹性棒进行计算。
Two-Stand Hot Reversing Mill is very complex as a auto control object, and rolling process is automatic procedure, the architecture of control system base on hierarchical control structure.
双机架炉卷热轧机是复杂的控制对象，而带钢轧制过程是一个高度自动化的生产过程，其控制系统基于分布式分级递阶控制结构。
Two drive types are used for the slight-stretch reducing mill, namely the individual drive (for each individual roll stand) and the centralized differential drive.
微张力减径机有单独传动(各机架)和集中差速传动两种传动形式。
Double stand cold rolling mill is the first cold rolling mill line of Jinan Steel, it is very necessary to ascertain the product orientation again after the mill has reached its designed yield.
双机架冷轧是济钢的第一条冷轧生产线，在轧机顺利达产后，应重新审视冷轧产品定位。
The computer control system of double stand reversing cold rolling mill in University of Science and Technology Beijing are accomplished.
介绍了双机架可逆冷轧的工艺过程、设备组成及压下规程的设计要点。
A rolling mill may have a single stand, or several stands used in conjunction.
一台轧机可能只有一个机架，也可能有几个组合使用的机架。
Simulation experiments on AGC ASC system of the two stand reversible tandem cold mill show that this system has good ability of convergence and resisting disturbance.
在应用于二机架可逆冷连轧板厚板形综合控制中的仿真实验表明，该系统有较强的抗干扰性和较好的收敛性。
In this paper, a single stand cold rolling mill is processed as a dual-variable system, inter-action between outputs (forward tension and exiting thickness) of the system is analyzed.
本文把单机架冷轧机作为一个双变量系统来处理，分析了该系统的输出最（前张力和出口厚度）之间的耦合关系；
The components, main functions, control characteristics and gauge control method of the computer control system for single stand reversing cold rolling mill were studied.
研究了单机架可逆式冷带轧机计算机控制系统的组成、主要功能、控制特点、厚度控制方法。
Two-Stand Hot reversing mill is a reversing mill, two stand roll can realize roughing phase and finishing phase, large-scale rolling force, good shape.
双机架炉卷热轧机是典型的往复式轧机，它的两个机架实现粗轧和精轧，轧制压力大，板型精度高。
The realization process of the automatic velocity control system for the 8-high five-stand continuous tandem cold mill of Hebei Zhongsteel Co. was introduced.
介绍了在河北中钢八辊五机架全连续冷连轧机组中自动速度控制系统的实现过程。
The traditional rolling force model of 4-stand tandem cold strip mill at Anshan Iron and Steel Corporation was analyzed, and some defects were found out.
分析了鞍钢冷轧厂4机架冷连轧机轧制力模型，指出了其存在的主要缺陷，并提出了改进方案。
An aggregate equal load function was developed and applied to the load distribution on a double-stand mill during hot strip rough rolling.
针对带钢热连轧双机架粗轧机组的特点，应用综合等负荷函数法进行负荷分配。
A simple adaptive control system was designed for constant tension of double stand Revere cold rolling mill.
为保证双机架可逆冷轧机轧制中带钢恒张力，设计了恒张力简单自适应控制系统。
Roll profile optimization using linear programming method is relatively simple as far as single stand mill is concerned and has wide application and actual efficiency.
用线性编程法优化辊型，对单机架轧机来说方法相对简单、应用广泛而且有实际效益。
By introducing the concepts of K Stand moving forward and Zero Stand, the said two types of mandrel mill can be regarded as one.
用K机架前移和零机架的概念，将两种类型连轧管机联系在一起。
The technology design and its characteristics of a single stand high speed wire rolling mill building in Xiangtan Iron & Steel Co. were introduced.
简要介绍了湘钢华光线材有限公司建设的一套单线高速线材轧机的工艺设计及其特点。
Automatic gauge control system in double-stand reversing cold mill is introduced. This system is consists of regulating device, thickness gauge and tachometer.
介绍了双机架可逆式冷轧机组厚度自动控制系统，该系统由调节装置、测厚仪和测速仪组成。
Temperature field finite element during flat hot continuous rolling process with compact double stand reversing rolling mill was researched, which is the only one in China.
实现了对国内唯一一架双机架紧凑式可逆炉卷轧机板材热连轧的温度场有限元研究。
There was a salt-marsh that bounded part of the mill-pond, on the edge of which, at high water, we used to stand to fish for minnows.
在水车贮水池的一边有一个盐泽，在涨潮的时候，我们时常站在盐泽的边上钓鲦鱼。
Asynchronous one-stand-tandem mill (ACSTV) is a new type rolling mill, which allows to accomplish several rolling passes on one stand and can produce thin cold strip.
异步单机连轧机是一种可以在一台轧机上进行多道连轧、生产冷轧薄金属带的新型轧机。
By calculating the infection of each element, it reflects the characteristic of single stand cold rolling mill.
该模型能够定量计算各因素对控制目标量的影响，较好的反映出单机架冷轧机的特性。
By calculating the infection of each element, it reflects the characteristic of single stand cold rolling mill.
该模型能够定量计算各因素对控制目标量的影响，较好的反映出单机架冷轧机的特性。
应用推荐