• Wall to floor, wall to ceiling junctions are fitted with a minimum radius of 25mm profits (coving).

    墙壁地板以及墙壁到天花板接合处装配半径最小25mm的弧形饰。

    youdao

  • Cut out the damaged area of skin and deburr the edges, the minimum radius of skin cutout is 0.5 inch.

    切除蒙皮损伤区域清除边缘毛刺,蒙皮切口最小半径0.5英寸。

    youdao

  • Theoretical analysis proved that the curve radius critical value of free way should be adopted by the limit of minimum radius .

    理论分析证明,高速公路曲线半径临界值采用极限最小半径。

    youdao

  • Besides, minimum radius and radius ratio of particle, especially the latter, have adverse effects on fracture strength factors of rock.

    岩石颗粒最小粒径颗粒半径均对断裂强度因子不利影响,且颗粒半径比影响较大。

    youdao

  • This paper discusses the criteria and principle for minimum radius of curve and the transition curve for railway track when running 160kin per hour.

    本文研究了我国时速160公里铁路最小曲线半径缓和曲线设计原则标准

    youdao

  • At last this paper summarizes research methods of main line parameters of High-speed railway, such as the minimum radius of horizontal curves, length and alignment of transition curves.

    总结了现行高速铁路主要设计参数的研究方法最小曲线半径、缓和曲线线形及长度、竖曲线半径等参数的确定原则和方法。

    youdao

  • We find that when the collapsing bubble approaches its minimum radius, a high pressure layer just outside the bubble is generated which gradually moves outward and subsequently forms a shock wave.

    计算还发现气泡接近最小半径处,气泡外围形成的高压区这个高压区域随后向外传播,形成冲击波

    youdao

  • 5 times the radius, conservation of mechanical energy tells you that that is the minimum it takes to just go through that point.

    5半径的高度,机械能守恒定理,告诉我们照着书,要经过这点最小值

    youdao

  • Creatures within a radius of 30 feet per point of Charisma modifier (minimum 30 feet) are subject to the effect if they have fewer Hit Dice than the initiate (dragons are immune to the effect).

    以她为中心半径为每魅力加值30范围(最小半径30尺)的生物如果生命骰低于龙之传人将会被影响

    youdao

  • The optimization of drawing technique was researched, and the influence of different blank holder force and minimum die fillet radius on stamping forming was studied as well.

    零件成形工艺进行优化,研究了不同最小模具圆角半径冲压成形的影响,通过模拟结果的分析得出了空调前板的最优化成形方案。

    youdao

  • Use generous radius at all corners. The inside corner radius should be a minimum of one material thickness.

    转角处大量采用圆角。圆角内部最小半径为一个厚。

    youdao

  • At last, the formulation of allowable minimum bending radius limiting the change of the tube-wall thickness is derived, and proved to be of practical value.

    推导限制弯管壁变化最小弯曲半径公式,经试验验证具有一定的实用价值

    youdao

  • Cable racks shall be arranged with vertical and horizontal changes of direction such that no cable is laid at less than its minimum-bending radius as given by the cable manufacturer.

    电缆支架布置必须纵向横向变化方向:所提供电缆生产商不得将电缆敷设低于最小弯曲半径。

    youdao

  • A few methods, which approximately calculate minimum relative bending radius, are put forward by analyzing the stress and strain as plate bending deformation in this paper.

    通过板料弯曲变形应力应变分析提出了几种近似计算最小相对弯曲半径方法

    youdao

  • Meeting requirement of the mechanical pressure angle, the minimum base radius of a plate cam for oscillating follower is determined by the 0.618 optimization method.

    在满足机构许用压力条件下,采用0.618最优确定摆动凸轮机械最小圆半径

    youdao

  • The minimum turning radius and the maximum turning Angle were determined through paddy field testing and the stability was ensured.

    通过水田试验确定了该机滚船转弯时不发生横向倾翻的最小转弯半径最大转向保证了其转弯稳定性

    youdao

  • The paper first demonstrates the maximum speeds that can be achieved at the different stages of Beijing-Shanghai High-speed Railway and derives the minimum curve radius on the basis of them.

    本文首先京沪高速铁路各个时期所实现最高速度进行了论证据此推算出最小曲线半径值;

    youdao

  • PC board inside the tablet series (universal, strong endurance plate) 150 times the minimum thickness of winding radius is itself;

    答:PC里边平板系列通用型强力型耐力最小曲折半径是是本身厚度150

    youdao

  • The mechanism, features and difficult problems in superfine machining are analyzed. The relationship between the minimum cutting thickness and the circular radius is confirmed.

    分析了超微切削加工机理特点技术难点,并最小切削厚度刀具刃口圆弧半径的关系进行了量化分析。

    youdao

  • The buckling radius was deduced by using the principle of minimum potential energy, Rayleigh-Ritz method and the relevant composite material mechanics.

    利用最小势能原理、瑞利-利兹以及相关复合材料力学理论推导出预浸料侧向屈曲半径公式。

    youdao

  • The transverse deformation of entiretied and constructed tunnel are both in the elastic limit corruptstate, the solution of the maximum and minimum of the segments'cross-section radius.

    装配式、整体式隧道横向变形处于弹性极限破坏状态,管片环横截面极限半径最大值最小值。

    youdao

  • When the maximum radius approaches to the minimum, the active nucleation sites density decreases and the nucleation boiling is restrained.

    最大空穴半径趋近最小空穴半径时,活化核心密度减小态沸腾受到抑制。

    youdao

  • The prediction agrees well with the experimental data and shows that it is the fractal relationship between the nucleation site density and the minimum nucleation radius.

    预测结果实验数据吻合并且表明汽化核心密度最小半径之间分形的关系。

    youdao

  • The expanding velocity of its radius reached the minimum when the ascending or descending velocity was in the maximum and vice versa.

    上升下降速度最大半径膨胀速度最小上升下降速度最小时半径膨胀速度最大。

    youdao

  • At the moment, through the calculation of minimum curvature radius and dealing well with single middle shelf, belt conveyor can operate commendably and can be processed and installed easy.

    通过确定凸、凹弧段最小曲率半径,结合此弧段范围内中间架的有效处理,既达到了胶带平稳运行的目的,降低了加工制造安装的难度,取得了好的效果。

    youdao

  • Based on the minimum curvature radius definition and mid value theorem, the pape gives the method of determining the limit load of pile foundation through extreme value analysis.

    文章根据最小曲率半径定义定理通过极值分析方法来确定桩基极限荷载

    youdao

  • Third, argument-polar radius curve of polar coordinate system whose pole is geometric gravity is formed, and maximum and minimum value points are searched.

    然后以重心极点,对边缘极坐标化,形成幅角-极曲线该曲线上寻找局部极大极小点。

    youdao

  • Third, argument-polar radius curve of polar coordinate system whose pole is geometric gravity is formed, and maximum and minimum value points are searched.

    然后以重心极点,对边缘极坐标化,形成幅角-极曲线该曲线上寻找局部极大极小点。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定