The key to their success was being disciplined enough to focus on one strategic issue at a time, rather than mixing it with a variety of other topics.
他们成功的关键是严格自律，坚持做到每次只关注一个战略性问题，而不是将各种话题囫囵地混在一起讨论。
Systems applications are becoming more hybrid in nature, mixing embedded, real-time, and more traditional technology platforms.
系统出现在本质、混合嵌入式的、实时的及更传统技术的平台上变得更加混合。
In a short time I was busy mixing butter and flour and my hands were soon covered with sticky pastry.
不一会儿我就忙着调拌起了黄油和面粉，很快我的手上就沾满了粘粘的面糊。
The results show that bleeding quality and consolidation strength are a function of mixing time and rotational ratio.
结果表明水泥浆液的泛浆性能和结石体强度是搅拌时间和速率的函数。
Mechanically agitated reactors are widely used in many industrial processes. Mixing time is one of the key parameters to the design of stirred reactors.
搅拌槽反应器广泛应用于许多工业过程，混合时间是搅拌反应器设计的重要参数。
The factors affecting the mixing time and segregating index were analyzed.
分析了影响混合时间和分隔指数的主要因素；
The liquid mixing time is of importance for the agitation process.
液相混合时间是搅拌过程的重要内容。
Properties and morphology of thermites mixed up by twin-screw and ball milling procedures are investigated with different mixing time.
采用双螺旋和球磨两种混料方式，研究不同混料时间对（铝）热剂性能及颗粒微现形态的影响。
The yellow index of blends at different mixing time and thermal aging time increased obviously than that of pure polymer.
在不同混炼时间及热老化时间下，共混物的黄度指数相对纯聚合物有明显提高。
The mixing time predicted by CFD for the single DT-6, CBY impeller and multiple CBY impellers was in good agreement with the experiment.
对于单层桨体系，不论是DT-6桨还是CBY桨，其混合时间的模拟值均与实验结果吻合良好；
Results showed that with the increase of the adhesive temperature, the mixing speed, the adhesive density and the mixing time, the stability of pigment in adhesive could be improved.
结果表明，提高胶液温度和搅拌速度，延长搅拌时间，增加胶液密度，可以提高着色剂在胶液中的稳定性。
Mixing time was an important parameter which describes mixing conditions in stirred tank.
混合时间是表征搅拌槽内流体混合状况的重要参数之一。
For hot metal desulphurization by powder injection, mixing time, residence time and powder penetration ratio are the three basic parameters which determine desulphurization efficiency in ladle.
熔池均混时间、粉剂穿透比和粉剂停留时间是决定铁水包喷粉脱硫效率的三个基本参数。
A special mixing device was developed by improving the traditional rotation mixer, the best mixing time was shorten, and the homogeneity was improved.
首次利用转鼓式混合机原理设计的真空后喷涂抛散混合机构可以缩短其最佳混合时间，提高了混合均匀性。
The experiment shows that the mixing efficiency of the combinatory two-blade impellers in water and CMC solution is highest in a comprehensive consideration of stirring power and mixing time.
实验表明，综合考虑搅拌功率和混合时间，双叶片组合式搅拌器在这两种介质中的混合效率最高。
This product is evenly mixed with water directly, no particles, into a paint-like, mixing time is greater than 5 minutes.
本品直接加水搅拌均匀，无颗粒，成涂料状，搅拌时间大于5分钟。
The high viscous non-newtonian fluid can be continuously bleached through static mixer, the mixing time is short, the energy consumption is small and the result is ideal.
利用静态混合器可实现生物多糖与脱色剂的连续处理，混合时间短，能耗低、效果好。
Concrete mixing time should be in line with "concrete structural engineering and construction inspection norms".
混凝土搅拌的时间应符合《混凝土结构工程施工及验收规范》的规定。
It has been found, that the mixing time mainly depends upon the mechanic power brought into the bath by the blowing gas.
研究中发现，熔池混合均匀时间主要和随气体输入的机械功率有关。
The experiment shows that fewer melting-back materials, higher temperature and more mixing time will decrease the mixture content, and heighten the intensity as well.
实验证明，含回炉料少、熔炼温度适当增高、加强搅拌，能减少其夹杂物含量，从而提高其强度。
Mixing time was prolonged and the effect of Ug extended in a larger range and showed extremum points when cross heat exchange tube was introduced.
引入横向换热管后，混合间延长，且表观气速的影响范围变大，表观气速对混合时间的影响不是单调关系，存在极值点。
The observed parameters of the experiments are the mixing time and the angle of gas-liquid phase region.
实验考察指标为混匀时间和气液两相区夹角。
The effects of mixing temperature, mixing time, crosslinking agent systems and high temperature repeated mixing on the mechanical properties of SBR/PE/PVC blends were studied.
介绍了开炼法制备SBR/PE/PVC多元共混体的共混温度、共混时间、交联体系及共混体高温返炼对材料力学性能的影响。
The information on top, bottom and top-bottom mixed blowing with regard to the mixing time are given.
文中给出了有关纯顶吹、纯底吹和顶底复合吹的有关搅拌情况。
Through indoor experiments, the influence of sand equivalent changes on the mixing time of micro-surfacing mixture, the emulsifier dosage and the performance after shaped was discussed.
通过室内实验，探讨砂当量变化对微表处混合料拌和时间和乳化沥青用量，以及成型后性能的影响。
The result shows, the ester exchange reaction did take place in PC/PET melting blend system, the extent of exchange reaction depends on content of the components, mixing temperature and mixing time.
结果表明，PC/PET共混体系在熔融过程中有酯交换反应发生，反应程度与组分含量、熔融温度和共混时间有关。
It has more advantages, such as: small size, fast mixing time, good effect to stir and so on.
具有体积小，混合时间快、搅拌效果好等优点。
The results of experiment showed that:the most affect factor was reaction temperature, core-wall ratio following, mixing time was the least one.
实验结果表明：反应温度对微胶囊气体二氧化氯释放速率影响最大，芯壁比次之，搅拌时间影响最小。
The results of experiment showed that:the most affect factor was reaction temperature, core-wall ratio following, mixing time was the least one.
实验结果表明：反应温度对微胶囊气体二氧化氯释放速率影响最大，芯壁比次之，搅拌时间影响最小。
应用推荐