Methods: Using optical microscopy and electron microscopy.
方法：用光、电镜观察。
The present situation of Near field Optical Microscopy (NFOM) is introduced.
介绍了纳米分辨近场光学显微成象技术现状。
The rib fractography of cross-linked PMMA has been explored by optical microscopy.
用光学显微镜观察了交联有机玻璃断面上的肋状形态。
The morphology of as-grown crystal surface was investigated by optical microscopy.
用光学显微镜观察了晶体生长面的原生形貌。
Optical microscopy, 13c NMR and ATR-FTIR were used to study the mechanism of transdermal enhancers.
本论文还通过光学显微镜、13cNMR及ATR - FTIR等手段探讨透皮促进剂的作用机理。
The liquid crystalline behavior of the polymers was studied by DSC and polarized optical microscopy.
并对其结构进行了表征。采用DSC和偏光显微镜方法研究了聚合物的液晶行为。
Scanning near-field optical microscopy (SNOM) is a novel tool for the research down to nanometer scale.
扫描近场光学显微镜(SNOM)是一种能探测纳米尺寸的新型显微工具。
The lung of somatic nuclear transfer cattle was observed by optical microscopy and he staining techniques in this paper.
应用石蜡切片及HE染色技术对体细胞克隆黄牛的肺脏及其细胞类型和形态进行了详细的观察。
Objective To investigate the diagnosis efficacy of using ordinary optical microscopy to identify the source of hematuria.
目的探讨应用普通光学显微镜观察尿红细胞形态以判断血尿来源的诊断效能。
The microstructure and the phase composition of the alloy were analyzed through optical microscopy, SEM, EDAX and XRD techniques.
通过光学显微术、SEM、EDAX、XRD技术分析了热等静压对材料的显微组织和相成分的影响。
The macrostructure and microstructure of the solidified samples was observed by digital camera and optical microscopy, respectively.
利用光学显微镜和数码相机对凝固试样的宏观及微观组织进行观察。
Experimental techniques such as optical microscopy and scanning electron microscopy were used to study fracture of press eccentric gear main shaft.
采用扫描电镜及光学显微镜对压力机偏心齿轮主轴断口进行了系统的分析。
The braze and interfacial microstructures were characterized by optical microscopy, scanning electron microscopy, and energy dispersive spectroscopy.
在钎焊和界面微观结构的特点是光学显微镜，扫描电子显微镜和能谱。
It has been shown by optical microscopy, electron microscopy and chemical analysis that such glaze has the property of physicochemical immiscibility.
使用光学显微术、电子显微术和化学分析证实这种釉具有不混溶性的化学本质。
The effects of the polymer network on the packing arrangement of the ferroelectric liquid crystal molecules are examined by means of optical microscopy.
通过光学显微镜可观察聚合体网络对铁电液晶分子组合排列的影响。
Effects of tin on the microstructure and mechanical properties of ZA62 alloys were investigated using optical microscopy, XRD analysis and tensile test.
采用金相显微镜、X射线衍射仪等分析测试手段，研究了锡对ZA62合金显微组织及力学性能的影响。
Near-field optical microscopy, based on scanning sample surfaces by the tip of optical probe, obtained the imagined information about the object surface.
近场光学显微镜是利用探针的扫描来获得样品表面信息的。
Both the diffusion couple specimens and the alloys were examined by means of optical microscopy, scanning electron microscopy, and electron probe microanalysis.
扩散偶和合金样品采用光学显微镜、扫描电镜和电子探针显微分析技术进行分析。
The failure of the powder metallurgy valve seat was analyzed by optical microscopy, scanning electronic microscopy, X-ray energy spectrum and X-ray diffraction.
采用力学、物理性能测试，金相、扫描电镜、能谱和X衍射分析研究了气门座圈产品失效的主要原因。
Confocal scanning optical microscopy (CSOM) includes transmission type and reflection type as well as coherent incident light type and incoherent fluorescent light type.
共焦扫描光学显微(CSOM)系统有透射式和反射式、相干光和非相干光荧光等类型。
Reasons of failure in cooling pipe of the reactor have been studied by the chemical composition analysis, optical microscopy examination and electron probe microanalysis.
应用化学分析、金相和电子探针显微分析技术对反应器中冷却水管的失效原因进行了分析。
In order to improve the experimental teaching quality of morphology, the traditional mono-functional optical microscopy is updated by the digital microscope mutual system.
为了提高形态学实验课的教学质量，将以往组织学教学中所使用的功能单一的传统光学显微镜更新为显微数码互动系统。
Confocal scanning optical microscopy (CSOM) is a high precision microscopical image system which based on the confocal principle, scanning technology and image processing.
共焦扫描显微成像系统(C SO M)是以共焦原理为基础，集扫描技术和数字图像处理技术为一体的高精度的成像系统。
When biological cells or tissue thick specimens are imaged by bio-optical microscopy, image resolution decreased significantly due to the impact of diffraction and defocus.
生物光学显微镜对生物细胞(组织)厚样本成像时，由于受衍射和散焦成份的共同影响，成像分辨率明显下降。
The plated sheet can be used to prepare the specimen for optical microscopy, SEM and TEM, it can also be used for the heat-treatment and the microhardness test of the powders.
电镀薄片可以用来制备光学显微镜、扫描电镜及透射电镜的观察样品，而且可以用来进行粉末的热片进及业余末的显微维氏硬度测试等实验。
The abnormal block and black round structure of 50 axletree steel was studied and analyzed using optical microscopy, transmission electron microscopy, electron probe and so on.
用光学显微镜、透射电子显微镜以及电子探针等现代材料试验手段对50钢中存在的大块黑色团状异常组织进行了研究和分析。
The surface defect on medium and heavy plate Q235B was investigated by means of the optical microscopy, scanning electron microscopy and energy spectrum analysis in this paper.
对Q 235 B中厚板表面缺陷处的显微组织、非金属夹杂物等进行了金相组织和扫描电镜观察及能谱分析。
The surface defect on medium and heavy plate Q235B was investigated by means of the optical microscopy, scanning electron microscopy and energy spectrum analysis in this paper.
对Q 235 B中厚板表面缺陷处的显微组织、非金属夹杂物等进行了金相组织和扫描电镜观察及能谱分析。
应用推荐